Thread: Problem configuring Netgear DG834G Router

First of all welcome to indiabroadband.net svijayakumar_mca

I am starting this thread for our new member svijayakumar_mca who is facing problems with Netgear DG834G router configuration.

Hi ,

Today I tried to configure the netgear DG834G router .But it's not getting up.

Could any one send me the steps for configuring in Airtel Broad band

farina1.com/DG834G/routerstatus.jpg
see screenshot above and report your router's status.
or post ipconfig/all data
Presume you have the installation CD.
For Airtel VPI/VCI is 1 and 32.
First try LAN port connection. Then wireless mode.

Multiplexing method : LLC based
VPI -1
VCI -32
Encapuslation : PPPo Ethernet
Login details : xxxxxxxxx@airtelairbroadband.in
Passwd :123456
Modem status : Connecting
DNS :get from ISP
Usign DHCP :from the ISP


Let me know if anything wrong in the configuration

replied to your PM.
DNS you can enter opendns. given to you.
feedback.

The beauty of Linksys or Netgear routers is that their web interface is very similar for different router models. If you can setup one Netgear router, you will have little difficulty in setting up other Netgear models.

svijayakumar_mca has given you the settings. Here is a link for Netgear WGR614 router. Use this as a reference: Setup of UT-300R2 with Netgear WGR614v7 (but use values given by svijayakumar_mca).

This model having inbulid modem + router. Can u send me screen shots of confgiuration this model

Screenshots - Netgear - WGR614 v7 (Netgear Firmware) | PcWinTech.com

Atlast I have fixed the issue.
ADSL Settings

LLC bases

VPi/VCI - 1/32

ADSL mode - AUTO

Now eveything working fine.

Hi I have got a similar problem and having a Netgear (DG834GT)

wireless router supplied by Sky in UK. I have got that in India and trying to

configure for BSNL Broadband connection but with no success.

Can somebody please advice how it can be configured and used in India.

::. Kitz - Netgear DG834GT set up for Be O2.::
Try wizard and enter vpi vci 0 and 35
or try manually
( should be similar. pages )

Changes :
country india
vpi vci 0 and 35

use open DNS

Test and feedback. .
If wifi model , try LAN set up first.

Originally Posted by svijayakumar_mca

Atlast I have fixed the issue.
ADSL Settings

LLC bases

VPi/VCI - 1/32

ADSL mode - AUTO

Now eveything working fine.

How did you get it to work. I am trying the same thing but mine is still not working. It says connected but no internet activity.
On my ADSL settings page there are only 3 fields
Multiplexing Method
VPI
VCI
NO option to set ADSL mode. I have the same modem as yours DG834G.
Please help.

see post no 11.
screen shots available.
http://www.kitz.co.uk/routers/Netgea...T_Be_Setup.htm

Originally Posted by essbebe

see post no 11.
screen shots available.

Hello Essbebe,

Thanks for your response.
I tried your suggestion, but no luck. My service provider requires authentication; hence I need to select the "Does Connection Require Login = Yes" option.
I selected PPPoE as that is what my 'Beetel 220BX' was set to.
Also when I tried vpi/vci : 0/35 option there is no success.

Although as I had mentioned earlier when I try vpi/vci : 1/32; LLC based connection. It works but keeps disconnecting. The log shows the following entries.

Sun, 2002-09-08 12:00:26 - Initialize LCP.
Sun, 2002-09-08 12:00:26 - LCP is allowed to come up.
Sun, 2002-09-08 12:00:37 - Administrator login successful - IP:192.168.0.2
Sun, 2002-09-08 12:01:20 - Loss of synchronization :1
Sun, 2002-09-08 12:02:07 - Initialize LCP.
Sun, 2002-09-08 12:02:07 - LCP is allowed to come up.
Sun, 2002-09-08 12:02:07 - PAP authentication failed
Sun, 2002-09-08 12:02:08 - LCP down.
Sun, 2002-09-08 12:02:20 - Loss of synchronization :2
Sun, 2002-09-08 12:02:28 - Initialize LCP.
Sun, 2002-09-08 12:02:28 - LCP is allowed to come up.
Sun, 2002-09-08 12:03:20 - Loss of synchronization :3
Sun, 2002-09-08 12:03:23 - Initialize LCP.
Sun, 2002-09-08 12:03:50 - Loss of synchronization :4
Sun, 2002-09-08 12:03:54 - LCP is allowed to come up.
Sun, 2002-09-08 12:03:54 - PAP authentication success
Sun, 2002-09-08 12:04:50 - Loss of synchronization :5
Sun, 2002-09-08 12:05:24 - LCP down.
Sun, 2002-09-08 12:05:30 - Initialize LCP.
Sun, 2002-09-08 12:05:30 - LCP is allowed to come up.
Sun, 2002-09-08 12:05:31 - PAP authentication success
Sun, 2002-09-08 12:05:50 - Loss of synchronization :6
Sun, 2002-09-08 12:06:20 - Loss of synchronization :7
Sun, 2002-09-08 12:07:01 - LCP down.
Sun, 2002-09-08 12:07:09 - Initialize LCP.
Sun, 2002-09-08 12:07:09 - LCP is allowed to come up.
Sun, 2002-09-08 12:07:10 - PAP authentication success
Sun, 2002-09-08 12:07:20 - Loss of synchronization :8
Sun, 2002-09-08 12:08:20 - Loss of synchronization :9
Sun, 2002-09-08 12:08:30 - LCP down.
Sun, 2002-09-08 12:08:48 - Initialize LCP.
Sun, 2002-09-08 12:08:48 - LCP is allowed to come up.
Sun, 2002-09-08 12:08:49 - PAP authentication success
Sun, 2002-09-08 12:08:50 - Loss of synchronization :10
Sun, 2002-09-08 12:09:50 - Loss of synchronization :11
Sun, 2002-09-08 12:10:18 - LCP down.


The old Beetel 220BX has 2 entries in the ADSL settings.
1/32
and
0/35 - for bridging.

VPI/VCI|Con. ID|Category|Service |Interface |Protocol|Igmp |QoS |State
1/32 | 1 | UBR |pppoe_1_32|ppp_1_32_1 |PPPoE |Disabled|Disabled|Enabled
0/35 | 1 | UBR |br_0_35 |nas_0_35 |Bridge |N/A |Disabled|Enabled

Hope this information is of use. Desperately need help.

Thanks and Regards,
Ajay

Just registered at the site.
Cheers,
Ajay

Originally Posted by essbebe

see post no 11.
screen shots available.

Hi Essbebe,

I posted a long response to your suggestion but it hasn't come up and is probably being moderated. I will try and reproduce the message.

My DG834G seems to connect to the service , but keeps getting disconnected frequently.

The Log suggests an LCP issue.
I tried Changing the LAN IP to 192.168.1.1, as some posts suggested, but with no success with the connectivity.
The DG834G log is something like this.

Thu, 2009-10-15 06-23-54 - Administrator login successful - IP:192.168.1.2
Thu, 2009-10-15 06-24-06 - Initialize LCP.
Thu, 2009-10-15 06-24-07 - LCP is allowed to come up.
Thu, 2009-10-15 06-24-07 - PAP authentication success
Thu, 2009-10-15 06-24-35 - LCP down.
Thu, 2009-10-15 06-24-37 - Initialize LCP.
Thu, 2009-10-15 06-24-38 - LCP is allowed to come up.
Thu, 2009-10-15 06-24-38 - PAP authentication success
Thu, 2009-10-15 06-26-04 - Loss of synchronization 1
Thu, 2009-10-15 06-26-18 - LCP down.
Thu, 2009-10-15 06-26-21 - Initialize LCP.
Thu, 2009-10-15 06-26-22 - LCP is allowed to come up.
Thu, 2009-10-15 06-26-22 - PAP authentication success
Thu, 2009-10-15 06-27-34 - Loss of synchronization 2
Thu, 2009-10-15 06-28-02 - LCP down.
Thu, 2009-10-15 06-28-09 - Initialize LCP.
Thu, 2009-10-15 06-28-09 - LCP is allowed to come up.
Thu, 2009-10-15 06-28-10 - PAP authentication success
Thu, 2009-10-15 06-28-34 - Loss of synchronization 3
Thu, 2009-10-15 06-29-04 - Loss of synchronization 4
Thu, 2009-10-15 06-29-30 - LCP down.

Also the earlier Beetel 220BX settings are as shown in the attachment.


I have spent 2 sleepless nights on this issue.
Help is appreciated.

Cheers,

VPI VCI 1 and 32 ( for airtel) select country ASIA or India
Use Open DNS.
Post as Jpg annexure screen shots of the settings
as shown in Post No11 or post no 8..
2.
Select "Diagnostics" page and post screen shot as JPG annexure here.
or upload at tinypic.com and give the link as
example ( not real)
hxxp://i23.tinypic.com/123wert.jpg

3. In computer
Start Network/ Lan or wlan
Properties
Network settings
Properties
TCP/IP
properties
select Obtain Ip address automatically.
use dns 208.67.220.220 and 208.67.222.222
ApplY Save.

4. if still "NOGO"
copy/paste for both lan and WLAN
Procedure:
Start RUn type cmd Ok
new window
type ipconfig /all

5. Confirm you get connected to Internet and surf
in "AlwaysON" mode with Beetel 110BX1/or 220BX1.

Hi Essbebe,

Answers to your instructions.
5. Beetel 220BX connects hence I am able to post replies to you and use the net otherwise. (wired ethernet only).

See the attached images for response to remaining instructions.

Regards,
Atix.
P.S> Happy Diwali and Seasons Greetings !!!!

In Basic select NO.
If you are using a dialer disable it.
( you have selected ppp/PPPoE always On
with UserId and PW entered in wan page )
In DNS enter open dns 208.67.220.220 and 208.67.222.222

Post these data:
Start RUN type cmd Ok.
New page
Type ipconfig /all
Copy /paste data here.
Para two:
You are getting connected to CHINA! Not Airtel.

IP Address Country Region City Latitude/
Longitude ZIP Code Time Zone
122.241.125.164 CHINA GUANGDONG LISHUI 23.201
113.16 - +08:00
Net Speed ISP Domain
DSL CHINANET-ZJ LISHUI NODE NETWORK 163DATA.COM.CN
IDD Code Area Code Weather Station

hi . i m facing some problem with my NETGEAR DG834G v3 modem . it is connecting well to internet but not opening the links or websites . can u help me regarding this problem

Hello Jack Singh,

I will need more details.
1) Service Provider
2) Details as on the "Connection Status" page of your router administration page.
3) Details as on the "Router Status" page of your router administration page.
Any more details that you can add are welcome.

Cheers,
Atix.

Try this link with step by step instructions.
http://www.indiabroadband.net/broadb...html#post54828 (Setting up Netgear DG834G Router)