Thread: UTSTARCOM WA3002G4 for AIRTEL

Hi Guys,

I am new! I did go through most of the threads on my topic but could not get the required answer.
It'd be great if anybody could help me with my problem.

I am trying to configure UTSTARCOM WA3002G4 Wifi router for Airtel broadband. Using 0/32 and all the right username and password.
But still the "Internet" lamp on the router doesnt glow and I am not able to connect to internet.

In the summary it says PPP down. The link is up for sure but this router says PPP down and cannot connect.

Guys! can anybody help!
Thanks a lot in advance!!

-Pavan

Using 0/32

It is VPI/VCI 1 and 32 for Airtel

The little I know about Dataone Broadband Services offered by BSNL


Chennai Telephones- Changing password in DataOne Pre-configured modem

New Page 1

Originally Posted by essbebe

It is VPI/VCI 1 and 32 for Airtel

That just solves the problem!!!

Thanks a ton essbebe!

Hi..I tried the same thing..it worked for wired LAN but not working for wifi..even windows is not showing any wireless n/w..plz help

That your PC is not showing up the wifi connection could be problem with wifi card or the router itself. I dont think configuration has anything to do with that. [check your PC hardware switch for wifi, etc]

Even with incorrect configurations you should see the AP in your available networks,
This is my understanding;

-p

I tried the same thing

give more information.

it worked for wired LAN but not working for wifi..

see post No.5
Feedback please

HI,

COuld you please share the installation media for the modem wa3002g4

Thanks in advance

Try these links:
New Page 1
UTSTAR WA3002-G4 quick reference
The little I know about Dataone Broadband Services offered by BSNL
VPI/VCI for Airtel 1 and 32.
Use Googledns 8.8.8.8 and
opendns 208.67.220.220.