Thread: Need Help Configuring GLB- 802C For 10 pc network

The connection seems to work fine for a single pc but when i connect to the router to a switch (JFS 516 Netgear) connection doesn't show up.


Please help me out.



home.JPG

lan.JPG

route.JPG

just confirm you are running in PPPoE mode... i am also using router-->hub-->pc's so its working fine for me...

no extra configuration. just keep the router in PPPoE mode & from all systems give default gateway as 192.168.1.1 thats all i did & is working fine...!

Though i will confirm about your router. Confirm you are in PPPoE mode

@praveenkumar

1.
Please confirm how you use the
Two Airtel BB connections /

2.
Were you given any modem/router by airtel for each connection /

3.
Do you still have ut300r2u and wrt54G /
and the BSNL BB connection /?

4.
Have you recently purchased Glb802 C /

5.
Running a cyber cafe with 10 computers .
..... Show how you have connected different isp's
with modems/routers/ switch
switch (JFS 516 Netgear

you have your router in 192.168.1.1 IP.

Did you change your switch to 192.168.1.x and default route as 192.168.1.1?

see here..
SKAPadmin.net Forum - Modem-Router-PC Network setup

by default, switches come with 192.168.1.1 IP.

[QUOTE=essbebe;


I am using a single 512kbps airtel connection in my cafe. I had disconnetion problem with my airtel modem (220bx1 beetel modem) so i bought this(GLB- 802C) yesterday.

I am using BSNL broadband @ home.

@ Skap

How to change switch ip.


Thanks in advance.

Did you make sure that switch has same ip of your ISP router?

(connect your computer to switch alone and try connecting to http://192.168.1.1. If it connects, then your switch and ISP router have same IP)

Proceeding after you make sure that both your ISP router and switch have same IP..
1. Connect only your switch to computer and not ISP router

2. Access http://192.168.1.1

2. Provide default username and password (either admin/admin or admin/password)

3. change network details as
IP: 192.168.1.5
Subnet mask: 255.255.255.0
Gateway: 192.168.1.1

4. After 2/3 mins, try to access http://192.168.1.5 (do not connect ISP router till now)

5. If it is success, connect ISP router to switch and then to your computer

6. For confirmation, configure your computer network details as
IP: 192.168.1.50
Subnet mask: 255.255.255.0
Gateway: 192.168.1.5
DNS: 192.168.1.1

7. Try browsing now and let us know.

I am not able to access my switch from any of the pcs.
But the lan is working fine.

I have assigned the system ips from 11 to 20


Ip: 192.168.1.11 to 192.168.1.20
Subnet 255.255.255.0
Gateway 192.168.1.1

DNS

203.145.184.40
203.145.184.13

have you tried with out connecting ISP router? connect only switch and only one computer, do not manually configure IP for computer. Let DHCP to assign the IP details automatically.

then post me ipconfig/all details.

Originally Posted by praveenkumar

I am not able to access my switch from any of the pcs.
But the lan is working fine.

http://img155.imageshack.us/img155/2...pswitchbt8.gif
( above with any adsl modem )
IN BEETEL 220BX1 SEE under maintenance

tr_069 client menu is disabled. if menu item available. .

2. Check under statistics adsl data and give report.

are all pcs able to access http://192.168.1.1 ?? post ipconfig output from the command prompt of a pc which isnt able to access

Originally Posted by skap

have you tried with out connecting ISP router? connect only switch and only one computer, do not manually configure IP for computer. Let DHCP to assign the IP details automatically.

then post me ipconfig/all details.

I connected a single pc to the switch (JFS516) and i was not able to open 192.168.1.1.... Does that mean that i was using a fault gateway so far?

The setup was running good for the past 18 months.


What should i do next having known that switch and router having different ip's.


Thanks for ur effort Skap


and @ essbebe


( above with any adsl modem )
IN BEETEL 220BX1 SEE under maintenance

tr_069 client menu is disabled. if menu item available. .

2. Check under statistics adsl data and give report"


Cant get it. Please make me understand

Originally Posted by skap

you have your router in 192.168.1.1 IP.

Did you change your switch to 192.168.1.x and default route as 192.168.1.1?



by default, switches come with 192.168.1.1 IP.

And Juz now i browsed through the forums to find out unmanaged switches dont have an ip.

Originally Posted by praveenkumar

The setup was running good for the past 18 months.

which setup?
Beetel Modem - Netgear - computers
or
D-Link - Netgear - computers?

also paste ipconfig/all details of the computer that browse

Beetel setup....


And here it is what i did

I connected the router and one pc to the switch and the net worked fine. And to my surprise the internet worked for the second comp too.And to check for disconnections i connected both the System to a gaming client Called Garena.


After that i tried 3 to 4 pc's to get the third internet connection which i never got. Then the first pc too lost the internet connection in browser alone. Garena was working fine.


In my frustration i connected Beetel 220xBX1 modem and the internet works like charm.

I installed network magic professional and it shows Internet and lan are working fine in all the systems. but still i am not able to connect.

P:S The problem with 220bx1 is i am getting dced from garena for every 2 min. I need garena at any cost.

Thanks for the feedback.
1.Enable DHCP in modem
2.Give range 192.168.1.3 to say 192.168.1.30
3.Try Virtual server /Port triggering option in Beetel 220Bx.

4. All computers TCP/IP
obtain Ip adddress automatically.

5. Confirm all 10 computers get connected to internet.

6. Then PF for "Garena ".
see w w w.portforward.com

i connected both the System to a gaming client Called Garena.......etc.

7. Post this data for any computer ( say No 5 )
Start RUN type cmd type ipconfig /all

i believe one of your computer might have misconfigured TCP/IP. So enable DHCP in modem as essbebe said

Originally Posted by essbebe

( say No 5 )
Start RUN type cmd type ipconfig /all

beetel.JPG


This is with beetel modem.



lan tut.JPG


I have not changed anything in lan option of the Dlink Router. Should i change the lan ip address?

In beetel modem check/enter

http://i23.tinypic.com/9b8wpg.jpg dhcp enable and range. DHCP range 192.168.1.3 to 192.168.1.15

http://i23.tinypic.com/oidiro.jpg opendns entries.

Save reboot. wait for two minutes.

In all computers

Start/Network/ LAN properties
TCP/IP properties
Select obtain IP address automatically.
DNS also automaticallyr enter 208.67.220.220 and 208.67.222.222.
( say in 5 computers auto another five enter data for testing . )
SAVE apply.

Check all computers (10) access the internet now.

Feed back

for games PF
http://i4.tinypic.com/5y2f8ds.jpg port triggering
or
virtual server.

later==>>> Glb802C settings

With Glb802C


dlink ipconfig.JPG


The net worked for a few min in 2 systems and after that i got network timeout error in all the comps including the first two.

But still i was able to ping sites through cmd prompt.

when you plug in computers more than 2, do you see any abnormal light blinking in any port of netgear switch ?

All must be Green.
Orange means initializing....it will turn Green after some..1/2 mins...

I am using a netgear switch and i dont see anything abnormal. Actually it seems to be i am not able to connect more than 1 pc not even two.


With the same settings i am able to use Ut300r2u modem and Bettel 220bx1 modem. But with GLB 802c i am able to access only one pc

Originally Posted by praveenkumar

With the same settings i am able to use Ut300r2u modem and Bettel 220bx1 modem. But with GLB 802c i am able to access only one pc

with settings of
Ut300r2 <-> NetGear <-> Computers
Beetel <-> NetGear <-> Computers

working means. I am thinking why GLB 802C with netgear is not working. You said ping is also working!!
Is there any compability issue ?)

Select Internal DHCP server button.
( if you had not changed the settings IP out of range )

When i check Internal DHCP and submit i get page cannot be displayed. I am not able to save that option.

@praveenkumar
after you r settled clearing the problems. let us know. We need to disable few logging options that would adversly affect performance of your browsing.

--> The problem is from one of his machines. Took a remote connection of his computers and found modem configuration was perfectly fine. After doing trace logs of HTTP and DHCP in modem, was able to find out the issue.

Originally Posted by praveenkumar

The connection seems to work fine for a single pc but when i connect to the router to a switch (JFS 516 Netgear) connection doesn't show up.


Please help me out.



home.JPG

lan.JPG

route.JPG

Are you able to solve your problem with GLB-802C? If so please let us know your config.