Thread: Two Modems on One line !

Hey Guys !!!

I hav airtell broadband connection,i hav 2 PCs one the first n other in the ground floor.I hav two BB modems.

I was wondering i can connect two on the single line ?



is it possible ?

I hope this will help

http://www.indiabroadband.net/broadb...onnection.html (Solution for multiple machines connecting to same BB connection)

"two on the single line" means you want to connect two modems in 1 line or two system in 1 line?

Originally Posted by ashishk2

I was wondering i can connect two on the single line ?



is it possible ?

I hav two BB modems.

Mention model make/model.
Make shift arrangement:

If theTelephone junction is available,
use additional adsl splitter in top floor.
connect each modem and work the system/s

Drawback;
Only one can work at a time.

Alternate:
(a)from First modem if Lan1,2 3, 4 available
extend from lan2 a RJ45
direct to computer 2. in top floor.

(b)or use USB port computer 1
and LAN port for computer 2. ( same rj45 )


feedback.

Or use USB port computer 1
and LAN port for computer 2. ( same rj45 )

I tried this it doesnt work
So i wanted to connect two modem on a single telephone line

read the post/s carefully and answer queries raised by contributer/s.
Answer to your problem posted earlier.

Originally Posted by essbebe

Mention model make/model

One is the Usual Beetel 220bx ADSL2 + Modem give by airtel
Other is Huawei SmartAx MT882 by BSNL

Reading ur forum i understood tht i can use this one with Airtell BB.

Originally Posted by essbebe

read the post/s carefully and answer queries raised by contributer/s.
Answer to your problem posted earlier.

I appreciate ur help,but i just trying to reply to the contributors reply

Originally Posted by ashishk2

Or use USB port computer 1
and LAN port for computer 2. ( same rj45 )

I tried this it doesnt work
So i wanted to connect two modem on a single telephone line

For this u have to configure your modem to PPoE modem (ie user id and password stored in modem). Only one modem is required.

Originally Posted by sujithsukrutham

For this u have to configure your modem to PPoE modem (ie user id and password stored in modem). Only one modem is required.

Its working onbeetel 220bx...already configured n now i wanna add the BSNL smartAX MT882 moden to the same line

Its working onbeetel 220bx...already configured n now i wanna add the BSNL smartAX MT882 moden to the same line

computer A: Betel 220Bx working Ok.
Computer B AX mt882 to be connected.
(VPI/VCI for Airtel 1 and 32 )
From BSNL Phone Junction ONLY ONE Modem can be connected.
From a parallel Phone connection ( say in First floor)
you can use the second modem ( MT882) with additional ADSL splitter.
ONLY one connection will work at a time.

See for settings for AX MT882
http://www.calcuttatelephones.com/da...all/mdm03.html

Para two:
How you tried to use the USB port of Beetel 220BX ?
Do you have the Cd for usb drivers ?
Explain the procedure you followed, and the error messages you received.
The IP address for USB Port can be 192.168.1.2

[QUOTE=How you tried to use the USB port of Beetel 220BX ?
Do you have the Cd for usb drivers ?
Explain the procedure you followed, and the error messages you received.
The IP address for USB Port can be 192.168.1.2[/QUOTE]


It can use both Ethernet n usb together,
For the driver it downloaded of the net....

@ashishk2
What is the present position ?
You could use beetel 220BX usb port ground floor.
Run rj45 from lan port to first floor.

Same way Mt882 can be used. for two computers.

I think it should work. Set your 1st modem , i.e. the one you would use more in pppoe mode & the second in bridge mode.
In case you need to use the 2nd modem only, dial a pppoe connection manually from ur pc.
To use both of them , switch on the 1st one & allow it to connect & then switch on the 2nd.