Thread: I have lost beetel 220bx1 installation CD.Please help me with the setup

I now want to use this modem for an MTNL connection. So I can't ask airtel to provide me with the installation.

Details : beetel 220BX1 Adsl2 +CPE modem
T2Q-0Q-001(written at the back).

Please mail me at aman.taneja.2008 at gmail or send me the link for downloading.
I'll be very grateful to the sender.

check the link ut300R2u given below.
for Airtel vpi vci is 1 and 32.

VPI VCI for MTNL is 0 and 32.

Installation Process of Beetel 220BX Combo modem.
Modem settings for NIC/LAN card:
Default Ip address 192.168.1.1
Subnet Mask 255.255.255.0
IP address 192.168.1.x ( x= 2 to 50 (say))
DNS server
use open DNS 208.67.220.220 208.67.222.222

Log in the router page in IE:
Select WAN
1.In WAN set up choose all the WAN interfaces by checking on 0 and 32 ( if available ) or EDIT
2.Click on ADD Change the VPI to 0 and VCI to 32
(* most important setting ) then click on next
3. Select PPP over Ethernet PPPoE
4. Select llc/snap-bridging click NEXT
5. In PPP userID and password ( provided by MTNL to you )

6. Enter PPPoE service as MTNL
7. Use Autnentication mode as AUTO
8. Leave other two boxes unchecked. click NEXT
9. Click NEXT again
10 Click on SAVE on the NEXT screen
11. Click on SAve Reboot and WAIT for approx 2 mnts.
12. Configuration if successful Happy surfing

feedback.