Thread: Can anyone tell how to configure D-Link GLB-802C ADSL Modem for Airtel Broadband?

Please help me to setup drink modem for Airtel . I have Airtel user name and password. And I want to connect using LAN.

VPI VCI for Airtel is 1 and 32
Please download the manual/s
Download QIG&User Manual.zip from Sendspace.com - send big files the easy way


India Broadband Forum 1.29 MB
feedback
Step 1 -
open your web browser and navigate to your router page "192.168.1.1" enter your default username / password which is admin (username) and admin (password) if from Airtel else try admin

Step 2 - click on Quick Configuration, on this page enter the settings as follows
Connection Name - Airtel
Operation Mode - Enabled
Connection Type - PPPoE LLC
VPI - 0
VCI - 35
IGMP - Disabled
IP Address - Leave it default "0.0.0.0"
Subnet Mask - Leave it default "0.0.0.0"
Use DHCP - Enable
Default Route - Enabled
Gateway IP Address - Leave it default "0.0.0.0"
Username - Enter your Username from AIRTEL
Password - Enter your password from Airtel
Use Dns - Enable or automatically asssign DNS

Now click on Submit,
then click on Admin Tab and
click on Commit and reboot
Give the modem time to reboot.

Source: a old post from below.
Procedure same for any adsl modem.

old threads.
India Broadband Forum - Threads Tagged with glb802c

What is correct format to put Airtel user name ? Email Id ?

And in the configuration page there is no option to use automatic dns and which dns I should use for Airtel ?

I read on some posts that some people use open dns instead Airtel default. Which is better?

Please delete the full quote immediately from the preceding post.
You can use it to draft your reply and then delete it. members need not scroll my own post twice !!!

Airtel gives you a USERID and PW. usually your(STD) phone number @airtel.in
EmailID PW will be different.
For selfcare , also can be different.
DNS : If option not available
try Google 8.8.8.8 and OpenDNS 208.67.220.220.

Feedback.

This Is an example screenshot on configuration page


When I make change in all field as you mentioned and click on submit button I get error
Error: Entry already exists

Please delete INSERT. Specimen form no use.
Post picture with entries you made, as Attachment ( jpg) picture here.
check Diagnostics page
.

I m using these entries. But it's not working


I m using this setting. Tell me if i m wrong.

Connection Name - Airtel
Operation Mode - Enabled
Connection Type - PPPoA/PPPoE
Encapsulation - PPPoE LLC
VPI - 1
VCI - 32
IGMP - Disabled
IP Address - 0.0.0.0
Subnet Mask - 0.0.0.0
Use DHCP - Enable
Default Route - Enabled
Gateway IP Address - 0.0.0.0
Username - 080******_kk@Airtel.in
Password - ********
Use Dns - Enable
Primary DNS- 125.22.47.125
Secondary DNS - 202.56.250.5

ftp://support.dlink.co.in/broadband/...G-GLB-802C.pdf
try the auto method.
Check diagnostics page

IP Address - 0.0.0.0(*192.168.1.3)
Subnet Mask - 0.0.0.0(255.255.255.0
Use DHCP - Enable
Default Route - Enabled
Gateway IP Address - 0.0.0.0 (*192.168.1.1)

Attachment 45 KB file.
First DNS: 125.22.47.125 Airtel Ok
second DNS change to 8.8.8.8 ( google) present Delhi Airtel.
2.
Also copy/paste only LAN data.
Start RUN type cmd Ok
new window
Type ipconfig /all

Now Internet is connected but Now it work for 15 min then stop for 5 min and same happens again and again

Originally Posted by jitendra.gamer

Now Internet is connected but Now it work for 15 min then stop for 5 min and same happens again and again

I think in the page where you entered yourId etc there could be abox for "alwaysOn' or idle time.
WAIT: Checking screenshots.
Screenshots - D-Link - GLB-802C (D-Link Firmware) | PcWinTech.com?
Update Not seen.

POST ipconfig /all data which also shows lease time.