Thread: How to Portforward in Binatone DT845W router.

HI,

I am using Binatone DT845W router (Airtel ISP), I am hosting a website and I need to do portforward but there is no Portfowarding option is there is router only Virtual Server and Port Triggering options is available. Please help how to do portforwarding in this router.

Thanks in advance.

Check WA3002_g1 in Portforward.com

Originally Posted by essbebe

Check WA3002_g1 in Portforward.com

Can u get me a link cause I am not able to find WA3002_g1

Port Forwarding Serv-U on the UTStarcom WA3002-g1 - PortForward.com
wait..... please spare some time
user With same model modem/router.
Please check up why user cannot connect to BSNL BB. all seem Ok.
http://www.indiabroadband.net/attach...m-bsnl-net.jpg

http://indiabroadband.net/showthread...667#post334667

Thank you dude, Now I did wat was suggested in the URL http ://portforward.com/english/routers/port_forwarding/UTStarcom/WA3002-g1/Serv-U.htm In tat link Local IP Address is left blank, wat IP address I should give whether the router IP address (192.168.1.1) or My pc IP address (192.168.1.2).

PC IP address.! 192.168.1.2
feedback.
Post a screen shot of the PF page please.

2.
out of thread:
Please see this post and find out what is the problem.
http://www.indiabroadband.net/bsnl-b...tml#post334801 (How to Configure Binatone airtel modem for BSNL!)
See post No 4 also.
Unable to surf the internet. all settings seeem OK.

I have attached status of my router and its Virtual server config. Please suggest me wats wrong in this.

Will request @meetdilip to post his comments.

I am hosting a website......

How can we access your web site ?
even assuming this is correct ?
BSNL gives you dynamic ip everytime you connect.
and 192.168.1.2 is your LAN IP.
There is no DDNS option in this router.
I think not possible.
Will request @meetdilip to post his comments.

I use an independent host for my website. There are many free hosts available too. If you are particular about hosting at your home, I would suggest NO IP or DynDNS for better results. You can find a lots of tutorial on net for the same.

@meetdilip
Thanks for responding.

@samurai_kenshin
http://lifehacker.com/124212/geek-to...ome-web-server

Originally Posted by essbebe

Will request @meetdilip to post his comments.

How can we access your web site ?
even assuming this is correct ?
BSNL gives you dynamic ip everytime you connect.
and 192.168.1.2 is your LAN IP.
There is no DDNS option in this router.
I think not possible.
Will request @meetdilip to post his comments.

I am not using BSNL, its Airtel and I have a static IP and DNS too..

Please avoid full QUOTE, from post immediately preceding yours.
Delete please.

Use [quote ] How can we access your web site [/ quote ] without space in quote

How can we access your web site

then post your reply.
This will enable other members to post their suggestions/comments quickly.

Static IP

BSNL gives you dynamic ip everytime you connect.
and 192.168.1.2 is your LAN IP.

I am not using BSNL, its Airtel .....

.
error regretted.

I have a static IP

check here;
What Is My IP Address? Lookup IP, Hide IP, Change IP, Trace IP and more...
Everytime you switch off and switch on the system check.
If it is same AIRTEL has given you a STATIC IP
192.168.1.2 is not a "static IP"

DNS and DDNS

I have a static IP and DNS too

.
http://compnetworking.about.com/cs/d...bldef_ddns.htm

WEB server
Refer the link given in Post No10 and give feedback,
http://lifehacker.com/124212/geek-to...ome-web-server
whether full procedure followed, step by step.

Please I do have a static IP 122.165.. ok and DNS too. this static is configured to my router and the machines which are connected to tat router will get a ip of 192.168.1.2 or 1.3 like tat so I need to port 80 to be forwarded to my local machines from the router. can u get my point.

Please see this screen shot also for Portforwarding in this link.
http://mybroadbandforum.com/beetel-4...are-t2753.html
.
2.
Your static IP : is it same H24 ?.
Most of us get diffferent( Dynamic IP), when ever we disconnect and reconnect from Internet.
you have Static IP allotted by AIRTEL ?
DNS is not the issue.

You said you are hosting a Website. . You want PF to all systems now ?

Procedure outlined here ( except STATIC IP) . followed ?confirm.
http_server ?
http://lifehacker.com/124212/geek-to...ome-web-server

@essbebe Its working now my site is live.... I have done virtual server for my local IP address 192.168.1.3 and enabled a exception for port 80 in server's firewall... Thanks man

Originally Posted by SamuraiKenshin

@essbebe Its working now my site is live.... I have done virtual server for my local IP address 192.168.1.3 and enabled a exception for port 80 in server's firewall... Thanks man

glad that essbebe helped one more member of this forum

Congratulations.
will appreciate if you post screen shots of the Actual settings
of the router Portforwarding/virtual server pages.
I can incorporate them in my link for others benefit.
You can blank your static Ip address.

rep++24 points to
@SamuraiKenshin

Originally Posted by essbebe

Congratulations.
will appreciate if you post screen shots of the Actual settings
of the router Portforwarding/virtual server pages.

Here are the screen shots thanks again

Ok. Thanks. One more information.
In Application, when you use the download arrrow what are the other
applications listed ?
No1 seems to be HTTP_server.
another 15 listed (popular or most used ), I presume.
Not needed Seen in my beetel 110TCI ( same model less wifi )