Thread: Utstarcom wa3002g4

HI ALL
i want to configure my modem wa3002g4
i entered 192.168.1.1 then username and password as
admin
admin
but nothing happens it asks it again plz tell wat to do.......

Was it working earlier or in use now ?
Why you want to access modem menu ?

If the modem was issued by AIRTEL try admin PW password
or
RESET to factory settings and try.
check this link;
http://tinyurl.com/essbebe-wa3002-g4-compilation

VPI/VCI for Airtel 1 and 32. AirtelID PW :Rest as usual DNS obtain automatically.

Feedback.

Using the same modem. I have use both ethernet and WiFi on it ? Were you able to connect properly while using a BSNL connection ? If yes, simply reset the modem and reconfigure it.

To reset, at the bottom of the modem you will find a small hole (similar and near to vent hole), use a ball point pen refill and press hold for say 30 seconds when the modem is ON.

You can now use this guide to configure it to use on both ethernet and WiFi

New Page 1