Thread: Airtel Broadband - Bridge Connecting but not PPPoE mode

Got a new connection, Am not a noob so I know pretty much about VPI VCI and such.

The guy who called me said to use VPI/VCI 0/32 for the connection. When used with Bridge it works perfectly fine. But when I change it to PPPoE mode I can see it is successfully connected with a global WAN IP and internet link on but it dosent hit any link

* Tried changing the DNS address, used the Google DNS/Airtel DNS
* Pinged 2.2.2.2 no solutions
* Tried 0/35 too


Please guys help me out ....

Always mention modem/model/make/number in your post.
VPI/VCI for Airtel 1 and 32
feedback.

Yep, modem - model and make needed.

Edit the VPI/VCI 0/32 entry, change the settings to PPPoE, enter ID and password and check.

Check any of these guides (only modem names change, most of them have similar interface just like Windows PCs by HP, Dell, Lenovo etc)

Beetel 450TCI manual /Firmware : MODEMS & ROUTERS - My Broadband Forum - Broadband Discussion forum

UTSTAR WA3002-G4 quick reference

If you have WiFi in your modem and intend to use it, refer this guide

http://www.indiabroadband.net/broadb...tml#post325614