Thread: How to repair - Limited or No connectivity

Welcome ...............

Thanks 4 ur solutions... I got solved my problem about ltd.connectivity, but still I can't access 192.168.1.1

look @ ur DNS servers.......
does everyone has unique DNS servers or they can be same??????

Originally Posted by cooltej

Thanks 4 ur solutions... I got solved my problem about ltd.connectivity, but still I can't access 192.168.1.1

Did you assign IP Address manually as explained in post #1?

What error message are you getting while accessing router?

@rishbhsharma

look @ ur DNS servers.......
does everyone has unique DNS servers or they can be same??????

Just use opendns 208.67.220.220
and 208.67.222.222. ( all can use them)
Isps specify their own DNS servers.

I think there is a thread in forum
"Broadband How to ......" explaining DNS servers.

Para TWO:
From Search (box above) DNS SERVERS.
http://www.indiabroadband.net/bsnl-b...tml#post252960 (Fast DNS Servers)

The most basic task of DNS is to translate hostnames such as theos.in to IP address such as 74.86.49.131. In very simple terms, it can be compared to a phone book. DNS also has other important use such as email routing.

PARA three: Some BSNL DNS servers.

218.248.240.181
218.248.240.180
218.248.240.208
218.248.240.24
218.248.255.105
218.248.255.155
218.248.240.135 DELHI
61.1.96.69
61.1.96.71.
may be some more.
Check locations / at
IP2Location.com - Lookup IP address to Country, State, City, Netblock, Longitude and Latitude

Originally Posted by RishbhSharma

look @ ur DNS servers.......
does everyone has unique DNS servers or they can be same??????

OpenDNS can be used with any ISP, its same for everyone.

208.67.222.222
208.67.220.220


ISP DNS differs which is ISP Specific.

Originally Posted by cooltej

Thanks 4 ur solutions... I got solved my problem about ltd.connectivity, but still I can't access 192.168.1.1

192.168.1.1 is usually the router. You can try pinging your router or type in it's IP address into your browser. If you can't access it then maybe your router has another IP (strange)

@cooltej
Try this.If you are connected to Internet.
Current IP Check
Note the IP address.
Type in your address bar.
A window may appear asking for userId/PW
to access modem/router settings.
Attachment 6501

Im facing a problem with my UTstarcom wa3002G4 Type II.When switching on the modem, i get a pop up error message Windows - System Error: there is an Ip address conflict with another system on the network. I tried to access the router with that ip 192.168.1.1.But its not working, it says not found or timed out.

I tried out ipconfig /all and here are the results






Windows IP Configuration

Host Name . . . . . . . . . . . . : nomad-19bf63890
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NVIDIA nForce 10/100/1000 Mbps Ether
net
Physical Address. . . . . . . . . : 00-26-18-3C-5E-6F
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.2
DHCP Server . . . . . . . . . . . : 192.168.1.2
DNS Servers . . . . . . . . . . . : 192.168.1.2
Lease Obtained. . . . . . . . . . : Wednesday, August 11, 2010 9:21:43 A
M
Lease Expires . . . . . . . . . . : Thursday, August 12, 2010 9:21:43 AM


PPP adapter Nokia 2730 classic USB Modem #3 (OTA):

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
Physical Address. . . . . . . . . : 00-53-45-00-00-00
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 110.227.116.122
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 110.227.116.122
DNS Servers . . . . . . . . . . . : 202.56.230.5
202.56.230.6
NetBIOS over Tcpip. . . . . . . . : Disabled


Please help me Resetting my modem.And i installed a motive self care software as well.
After running that the DSL, LAN and POWER LED all r becoming stable as well as a NEW LED which i never saw to glow even named Internet is also becoming stable.NO WIFI connectivity.

1. Use this guide and configure in PPPoE

New Page 1

2. Enable DHCP in your modem.

3. In the TCP/IP properties of your connection (both machines), set " Obtain IP address automatically "..

Feedback.

Thank you very much Dilip...My problem is solved...Ur a true wizard

Always Welcome

Originally Posted by meetdilip

The procedure is the same. As for values, i think subnet mask is different.

Start> run> ipconfig/all will give you the values (when the connection is ok).

If you still face the problem, please inform. We will be able to sort it out.

hiiii i use wa3002g4 utstarcom modem i cant configure the modem . i connect modem through wireless but by using normal dial up connection its shoeing limited/ no connectivity wen i connect through wireless and i cud use net in a single profile in internet is dere any way to solve dis issue?

i tried dis procedure but the page blinks and go i dont know what is written it ??

1. Configure your modem in PPPoE mode.

2. Enable DHCP in your modem.

3. In the TCP/IP properties of the connection, set " Obtain IP address automatically ".

I hope u understood my problem i cant go to the page 198.168.1.1

Originally Posted by loolu

I hope u understood my problem i cant go to the page 198.168.1.1

1. Try the external IP in the address bar and check.

2. If nothing works, reset the modem and reconfigure it.

3. This may help

http://www.indiabroadband.net/broadb...no-access.html (192.168.1.1 No access !)

hi,
i get the same problem but only if i switch on the modem (ut300r2u) after the system is on. but if i switch the modem before or at the same time with the system (XP SP2) this messege does not come. i can connect to the internet even if this msg comes. any help.
regards,
kaushik

1. Start > Run > cmd > ipconfig/all, post the screen shot.

2. Mention your modem - model and make

3. How many PC do you use ? One or more ?

Start > Run > cmd > ipconfig/all does not seem to run in my computer. the screen is comming and going immidiatly. i'm not sure why. model make and are UTSTARCOM and ut300r2u respectively. i'm using one computer only.
regards,
kaushik.

Originally Posted by kaushik.nath

Start > Run > cmd > ipconfig/all does not seem to run in my computer. the screen is comming and going immidiatly. i'm not sure why. model make and are UTSTARCOM and ut300r2u respectively. i'm using one computer only.
regards,
kaushik.

m8 give this ip address ur issue wil be resolved for sure 192.168.1.3 default 255.255.255.255. Let me know whether ur problem is solved or nt

@kaushik-nath
try this: and copy/paste data here.
Start RUN type cmd
Ok
New window
type ipconfig /all
2.
Check link wa 3002-G4 for modem settings screen shots.( less wifi )
UTSTAR WA3002-G4 quick reference
3.
Post SNR ATTN data from STATISTICS adsl menu page.
( also Mod mode selected )

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Kaushik>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : rana
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VIA Rhine II Fast Ethernet Adapter
Physical Address. . . . . . . . . : 00-13-D3-F6-83-C9
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 208.67.222.222
208.67.220.220
Lease Obtained. . . . . . . . . . : 14 November 2010 17:25:16
Lease Expires . . . . . . . . . . : 15 November 2010 17:25:16

PPP adapter dataone:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
Physical Address. . . . . . . . . : 00-53-45-00-00-00
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 59.93.54.76
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 59.93.54.76
DNS Servers . . . . . . . . . . . : 218.248.241.5
218.248.240.180
NetBIOS over Tcpip. . . . . . . . : Disabled

C:\Documents and Settings\Kaushik>

copy of ipconfig/all
modem - utstarcom / UT300R2U, i'am using only one computer. If I switch on the modem before switching on the system this problem does not come.
regards, kaushik.

Configure a static IP.

In the TCP/IP properties of your connection, give the following values

IP : 192.168.1.25
subnet mask : 255.255.255.0
default gateway : 192.168.1.1

Feedback.

thanks wizard. its working just fine. how was it done if u could please exp.
regards,
kaushik.

Always welcome. It is a problem of assigning IP hence a static IP will solve the issue.