Thread: Limited or No connection

I just got the TATA WiMax installed, the connection is pretty good the download and upload is pretty decent at 0.5mbps but only on the tata technician's laptop..oh yes! and Not on my compputer.... when he tries to connect it to my PC it shows "Limited or No connection"

He tried it again on his Laptop and it showed the same message again ... so he did the following things and the connection started working again on his laptop >>

--configured the IP manually in TCP/IP settings to 192.168.1.2 and then the LAN icon shows "connected at 100mbps"

--gave the following command in CMD "telnet 192.168.1.1" and entered usrname and pwd and typed "sh bs" [Enter] ... it gave a hell lot of information which i beleive to be the signal strength etc...

--open IE and the damn thing started working on his laptop ..Eureka!! unk:

--so he tried the same thing on my Desktop PC ... now when he types the following command in CMD "telnet 192.168.1.1' it gives an error "Could not open connection to the host, on port 23: Connect failed"

--he struggled with it for quite some time (long enough to finish my 2 cans of coke) and it still wasn't working and the genius came up with a solution that my LAN card is faulty ... i said OK

Next stop computer hardware store ... bought a new LAN card .. connected and tried the same and guess what??.. the same message ...

I thought ..OK my XP is gone bad .. so i re-install it and the same error .... :angry:

Then i thought maybe the LAN card is faulty .. so i go buy a new LAN to USB converter and still the same message...

Tried with and without firewall

Limited or No Connectivity

"telnet 192.168.1.1" .... error is....... "Could not open connection to the host, on port 23: Connect failed"

Could someone please HELP ME find a fix for it ...??

There is a windows patch for this issue.... downloading and intalling it should resolve your problem

/members/czarofmontserrat

If problem solved, kindly post the result here.
Else:
post ipconfig /all
Start run type cmd type ipconfig /all
Confirm Wimax is connected in "Dialer" mode or " Always On "
Modem number of the wimax unit.