Thread: wifi connection issues

hi everyone !
i have a utstarcom WA3002G4 modem with BSNL provider... i've been reading all posted messages and tips about wireless connection problem but i still can't find a way to connect on WIFI ... my computer uses vista (family edition Premium) and it shows that the connection is available and the signal is excelent but when i hit the connect button it tell me it's impossible because the signal is not strong enought .... the modem is placed as near as possible to my laptop ... i rebooted it a thousand times, still no results... any suggestion ?

Click "View available Wireless Networks "
Do you see your WIFI network name ?
Any other Network secured unsecured?
( For XP PRO SP3)
2. Or select REPAIR
what is the error message ?
3.
Start/RUN type cmd OK
New window
type ipconfig /all


REF:http://www.indiabroadband.net/bsnl-b...reference.html (UTSTAR WA3002-G4 quick reference)

yes my wifi connection shows with an excellent signal.the repair massage is just that my signal is not strong enought. i must give you a precision. i am French and my computer was bought in france so i have to translate everything as well as i can ... so it's not always obvious. sorry for this extra difficulty !
i runned cmd, but what next ?

Need these details ipconfig /all

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\xxxxxx>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : samba-vz2p3hxuj
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : Yes

Ethernet adapter Wireless Network Connection 2:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NETGEAR WG511v2 54 Mbps Wireless PC
Card
Physical Address. . . . . . . . . : 00-14-6C-8F-9B-67
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.15.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.15.1
DHCP Server . . . . . . . . . . . : 192.168.15.1
DNS Servers . . . . . . . . . . . : 208.67.220.220
208.67.222.222
Lease Obtained. . . . . . . . . . : Monday, November 02, 2009 17:05:19
Lease Expires . . . . . . . . . . : Monday, November 02, 2009 18:05:19

C:\Documents and Settings\xxxxx>

Mention Post is in French Language.
You can post in French: will try translate with Babelfish
Other members may also help.

I am having the same problem.

thanks ! i manage to connect on wifi
at the beginning it worked allright but now the connection is very slow... downloading never excedes 20 kb/s wictch i thing is low even for a 512 connection. the modem is also oftenly rebooting ... but i guess that's just busy land line traffic witch make him loose the connection ..
anything i can do to improve this ?
i know there is some boosters but any suggestion on witch one is really working and is not another marketing spam-loaded ripoff ?

thanks i folowed some of the reference guide and i managed to connect by wifi
but it is very slow : my download speed never goes over 20 kb/s witch i believe to be quite slow even for a 512 connection speed .
would you have any advice for speeding up ?
also i have to reboot my wifi connection every time to connect it, otherwise it won't even show on the available wireless connection widow

@gozoflo

Reset you router with the help of the reset button at the bottom of your router press it for 2 to 3 seconds until the LED's start going off, then configure your router and check whether your Wi-Fi problem is solved or not.

Refer: Modem configuration: WA 3002 G4

Please check the speed on LAN connection/WLAN connection same server..
Start Network WLAN
Properties
Wireless settings page opens
Check TCP/IP
properties
IN DNS
add
208.67.220.220
208.67.222.222
Apply SAVE.
Retest speed again. Do not expect dramatic increase.
Target 512/8 = 64 KB/sec Maximum.
( Practical speed 30 to 50 KB/sec)

Airtel
or speedtest.net.

In your computer only some tweaks can be made.
Try TCP/IP optimizer
from Speedguide.net.

For ref : Not to be done now.
Reset switch : ( or in bottom small round hole near right leg)
http://i32.tinypic.com/5evcyo.jpg

Originally Posted by essbebe

For ref : Not to be done now.
Reset switch : ( or in bottom small round hole near right leg)
http://i32.tinypic.com/5evcyo.jpg

this dont resemble WA3002G4

May be this is the access point for RESET? mentioned in text.
resetswitchrt6.jpg

Originally Posted by gozoflo

hi everyone !
i have a utstarcom WA3002G4 modem with BSNL provider... i've been reading all posted messages and tips about wireless connection problem but i still can't find a way to connect on WIFI ... my computer uses vista (family edition Premium) and it shows that the connection is available and the signal is excelent but when i hit the connect button it tell me it's impossible because the signal is not strong enought .... the modem is placed as near as possible to my laptop ... i rebooted it a thousand times, still no results... any suggestion ?

hello!did u try encrypting( securing with password 5 digits)ur modem by goig into IP ad 61.1.129.36/bsnl?there enter Id "admin" and pw "admin".Enter.u will get the encryption page.It will give u a choice of 64 bit/128bit.Choose 64 bit.it will ask for 5 digit password.enter it and save.then try connecting it.when u click connect it will ask for the pw once.if u are successful then it will connect automatically in future.