Results 1 to 6 of 6

How to connect vonage adapter and wireless router to BSNL Modem (Sterlite Smartfax MT

  1. #1
    Junior Member
    Join Date
    Dec 2009
    Posts
    4

    Default How to connect vonage adapter and wireless router to BSNL Modem (Sterlite Smartfax MT

    Hi,

    I just now registered in this site. I came from Canada visiting India for a month atleast. I'm trying to connect my wireless router (Linksys WRT320N) and Vonage adapter(s) (VDV21-VD) to BSNL Modem (Sterlite Smartfax MT882), but couldn't able to (There were few error messages on the screen when I try to connect). Please find me the complete set-up instructions since I'm not technically that sound. I would appreciate your help. Thank you.

    Regards,

    Prabhakar.

  2. #2
    LEARNER
    Join Date
    Aug 2007
    Posts
    15,263

    Default

    Confirm you can connect to Internet in "Always On" mode .
    with AX MT882 connected to desktop or laptop.

    IF Yes connect Rj45 from computer end to Vonage Unit.
    Restart both units.
    All three icons Telephone/Monitor/Globe should appear.
    Date and time also.
    Post error messages. appearing in LCD display.
    REF:
    UT-300R2U ADSL MODEM MENU

  3. #3
    Junior Member
    Join Date
    Dec 2009
    Posts
    4

    Question How to connect "Internet always on"?

    How to connect "Internet always on". Is RJ45 cable is different than LAN Cable? The error # 323 (could not access new router or Gateway) on windows screen when I try to connect Linksys WRT320N wireless router .

  4. #4
    LEARNER
    Join Date
    Aug 2007
    Posts
    15,263

    Default

    see this web site for MT882.
    1.SmartAX MT-882 ADSL MODEM MULTIUSER CONFIGURATION
    2.
    Confirm MT882 + computer connects to Internet .
    3.
    Then MT882 + vonage Unit + phone.
    4.
    Postpone settings for for WRT320N. now.
    Rj45 and lan cable are same .

    ref:http://www.vonage.com/how_vonage_wor...rs/?type=F1000

    https://subscribe.vonage.com/mac_activate

    http://www.vonage.com/downloads/Vona...de_VPORTAL.pdf
    Last edited by essbebe; 11th December 2009 at 09:19 AM.

  5. #5
    Junior Member
    Join Date
    Dec 2009
    Posts
    4

    Default Still unable to figure out to connect with WRT320N and AX MT882

    Hi,
    Thanks for the info. Still facing some problems while trying to connect through the router (WRT320N). I keep getting error 687. Are there any other settings to be configured to make this work. Thanks a lot.

    Prabhakar

  6. #6
    LEARNER
    Join Date
    Aug 2007
    Posts
    15,263

    Default

    error 687 give details.
    Some confusion for me.
    (a)Vonage working Ok ?
    (b)Computer Internet not working ?
    (c)both not working?.

    UPDATE: 0920AM
    The error # 323
    You will have to change the IP of the router to 192.168.2.1.
    http://tinyurl.com/yer3btt
    [Open in new window]

    confirmed Linksys needs an adsl modem.
    http://www.linksysbycisco.com/US/en/products/WRT320N




    Para two:
    Are you trying to bypass AX MT882
    and use WRT320N to connect to your ISP ?
    ( will check the details later in Google )
    Confirm Linksy's WRT320N is only a wifi router, and needs an external modem.
    If WRT320N is an ADSLmodem+4lanport+wifi
    Check computer connects to Internet normally in LAN mode and WIFI mode ~~~~
    Then from LAN1 to Vonage Unit. Blue cable.

    para three:
    My setup: Beetel 110Bx1 Blue cable ( 4 wires)==>>. Vonage VDV21===phone1 phone 2 .
    Vonage== Thick blue cable ( 8 wires)==>>
    netgearwgr614V6 ~~~~~~ laptop in wifi
    mode.
    Netgear Lan1 ===Rj45>>. another laptop ethernet port. ( No wlan card)
    laptops not in use 24/7.

    COPY/Paste this data ( NO EDIT)
    Start RUn type cmd Ok
    new window
    type ipconfig /all
    Last edited by essbebe; 21st December 2009 at 08:01 AM.

Similar Threads

  1. Replies: 1
    Last Post: 28th July 2013, 01:48 PM
  2. Replies: 1
    Last Post: 30th September 2012, 09:38 PM
  3. wireless usb adapter for bsnl wireless router
    By mrcool63 in forum BSNL broadband
    Replies: 0
    Last Post: 2nd April 2012, 12:12 AM
  4. Replies: 6
    Last Post: 20th August 2010, 03:57 PM
  5. Replies: 10
    Last Post: 13th March 2010, 06:52 AM