Results 1 to 14 of 14

Thread: help required

  1. #1
    Junior Member
    Join Date
    Jan 2010
    Liked
    0 times
    Posts
    9

    Default help required

    guys, i am a newbie here. i have a TAD100(teracom) which is a Adsl2+ modem. i am planning to purchase the d-link DIR 300 wireless router which supports DSL/cable modem. my question is whether i can use the DIR-300 router to connect to the internet?

  2. #2
    LEARNER
    Join Date
    Aug 2007
    Liked
    28 times
    Posts
    15,323

    Default

    YES. I think I answered in a different thread.
    Anyway see the guides by @just4kix.

    IF Your ISP is cable BB provider ADSL modem cannot be used.

  3. #3
    Junior Member
    Join Date
    Jan 2010
    Liked
    0 times
    Posts
    9

    Default

    @above

    my ISP is Tata Indicom. and i downloaded the guide. how to find whether the TAD100 modem is in bridge mode?.

    @essbebe

    by accessing 192.168.1.1 through http, my TAD100 adsl2+modem settings are:
    vpi/vci 0/32 and protocol is "bridge" and it is enabled.

    when i connect to the internet, the dialpg box shows "Connecting through WAN Miniport,PPPOE". i assume it is in bridge mode and DHCP is enabled.

    so i can buy the DIR-300 wireless router and follow the guide by just4kix??
    Last edited by lakshmanvvs; 01-19-10 at 08:11 AM. Reason: Automerged Doublepost

  4. #4
    LEARNER
    Join Date
    Aug 2007
    Liked
    28 times
    Posts
    15,323

    Default

    Modem TAD100. ISP TataIndicom VPI/VCI 0 32.
    ( same as UT300r2U New BSNL)
    ( compare Device info :
    http://img227.imageshack.us/img227/8201/75851163ch0.jpg

    You have to set In 'Always On" PPPoE mode
    .Select PPPoE in wan page instead of 'Bridged'
    Enter username and PW in wan page of modem
    Enable DHCP.

    2.
    wifi router/s ( 4lan port +wifi)
    Range limited to about 30 to 40 feet radius
    *conditions apply

    When you buy any WIFI router, you will get an
    Installation Cd, and manual may be.
    Dlink/Linksys/Netgear/Buffalo etc usually have a
    menu called Setup wizard.
    You will be asked to give min details to
    enable wifi.

    Try that initially ,and then go for manual settings.
    ( the IP address of wifi router will be different )
    REF: I am using same wifi router.

    1. ADSLmodem preferably in "Always On " mode.
    2. use the wizard of wifi router.
    3. Try the LAN1 mode/ethernet to computer.

    4. try WIFI in unsecured mode. ( No cables )
    5. Use security key and test.
    6. Check any other wifi secured/unsecured
    appear in your computer.

    7. Post this data if any problem
    procedure for both LAN and WLAN
    Start RUN type cmd OK
    New window
    type ipconfig /all
    Copy/Paste data ( without edit) here.

    8. to post screen shots upload at tinypic.com
    give the link here as
    ://i11.tinypic.com/2e5myb4.jpg ( omit http)
    Last edited by essbebe; 01-19-10 at 09:58 AM.

  5. #5
    Junior Member
    Join Date
    Jan 2010
    Liked
    0 times
    Posts
    9

    Default thanks

    @ above

    many thanks mate. will post the screenshots. so, the wi-fi N routers have extended range? >100 feet?

  6. #6
    LEARNER
    Join Date
    Aug 2007
    Liked
    28 times
    Posts
    15,323

    Default

    Quote Originally Posted by lakshmanvvs View Post
    @ above

    many thanks mate. will post the screenshots. so, the wi-fi N routers have extended range? >100 feet?
    With dual antenna models, the range
    may extend. As mentioned earlier
    Height of the Antenna/Obstructions/Line of sight, location of the WIFI router and laptop etc count. Many variables and no firm distance can be given.

    I am picking up an unsecured WIFI network , the distance of which may even exceed 50 feet.
    My WGR614 tested for about 20/30 feet.

  7. #7
    Banned
    Join Date
    Jun 2008
    Liked
    0 times
    Posts
    165

    Default

    Quote Originally Posted by essbebe View Post
    With dual antenna models, the range
    may extend. As mentioned earlier
    Height of the Antenna/Obstructions/Line of sight, location of the WIFI router and laptop etc count. Many variables and no firm distance can be given.

    I am picking up an unsecured WIFI network , the distance of which may even exceed 50 feet.
    My WGR614 tested for about 20/30 feet.
    my router is Matrox model MAT2192-210 router gives me 1250 feet coverage with 35% signals @ 18mbps when near to router it gives me 54mbps at 780feet. it having one antenna of 18dbi patch antenna.

  8. #8
    Junior Member
    Join Date
    Jan 2010
    Liked
    0 times
    Posts
    9

    Default

    i got the dir-300 router.
    changed my adsl TAD 100 router settings to pppoe, changed LAN settings to enable dhcp
    changed the IP address from 192.168.1.1 to 192.168.0.1
    rebooted the modem/router
    now i cant get back to the DSL router settings page of my TAD 100

    the ipconfig /all command, after connecting using user name and password from TAD 100 modem is

    Description . . . . . . . . . . . : Intel(R) 82566DC-2 Gigabit ethernet
    onnection
    Physical Address. . . . . . . . . : 00-1C-C0-38-F6-88
    Dhcp Enabled. . . . . . . . . . . : No
    IP Address. . . . . . . . . . . . : 192.168.1.12
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : 192.168.1.1
    DNS Servers . . . . . . . . . . . : 202.54.12.164
    202.54.29.5

    PPP adapter TATA VSNL:

    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : WAN (PPP/SLIP) Inter
    Physical Address. . . . . . . . . : 00-53-45-00-00-00
    Dhcp Enabled. . . . . . . . . . . : No
    IP Address. . . . . . . . . . . . : 61.11.44.126
    Subnet Mask . . . . . . . . . . . : 255.255.255.255
    Default Gateway . . . . . . . . . : 61.11.44.126
    DNS Servers . . . . . . . . . . . : 202.54.12.164
    202.54.29.5
    NetBIOS over Tcpip. . . . . . . . : Disabled
    Last edited by lakshmanvvs; 01-25-10 at 02:37 PM. Reason: Automerged Doublepost

  9. #9
    LEARNER
    Join Date
    Aug 2007
    Liked
    28 times
    Posts
    15,323

    Default

    i cant get back to the DSL router settings page of my TAD 100
    Use TataIndicom VPI/VCI and userID and Password
    and dns.
    step 1.


    Reset the modem with power on for 20 to 30 seconds.

    step 2.
    TRY dialer mode to connect .
    REF: similar modem pages confirm.
    The little I know about Dataone Broadband Services offered by BSNL
    step 3
    IF unsuccessful
    give feedback.
    Else
    step 4
    access the modem and set up for PPPoE
    "Always On" connection.
    Uncheck "Bridged' In WAN edit page.
    The little I know about Dataone Broadband Services offered by BSNL
    THEN
    confirm connected to Internet
    Feedback.
    INfo wanted: Change Dir300
    Ip address . 192.168.2.1
    Step 5:
    Dir300:
    Confirm you have installation CD
    and follow the wizard , if available.
    feedback for more ====>>>

    Update: Need Device info or screen shot of Tad100 device info page.
    Modem may be similar to Ut300r2u new) or Beetel 220Bx family.
    confirm this page. ( software details may be different )

    http://i23.tinypic.com/xgkx6u.jpg
    Last edited by essbebe; 01-25-10 at 05:25 PM.

  10. #10
    Junior Member
    Join Date
    Jan 2010
    Liked
    0 times
    Posts
    1

    Default Statistics

    Hi friends,

    I need the statistics of our country Broadband details for the past 4 years.And please help me to know the details of telecommunication jobs in India and their pay grades. Please respond to this mail my friends.


    looking forward for your reply,

  11. #11
    LEARNER
    Join Date
    Aug 2007
    Liked
    28 times
    Posts
    15,323

    Default

    @Sridhar
    Wrong forum.
    Use different search terms in Google or Bing or Yahoo search engines and get the statistical information.
    Telecommunications jobs in India;
    Be specific at which level "
    Diploma holders/degree holders/>PG degree holders etc
    Communications/computers/ network/ cellphones /teachers/professors/ /TV/radio/DTH/ software programmers/etc the subject is vast .
    You may not get what you want in this forum. as many hours/days have to be spent to collect the information.
    If willing to pay a fee I may try !!!
    ( Maximum Rs 10,000 time required one week !)

  12. #12
    Junior Member
    Join Date
    Jan 2010
    Liked
    0 times
    Posts
    9

    Default

    Quote Originally Posted by essbebe View Post
    i cant get back to the DSL router settings page of my TAD 100
    Use TataIndicom VPI/VCI and userID and Password
    and dns.
    step 1.


    Reset the modem with power on for 20 to 30 seconds.

    step 2.
    TRY dialer mode to connect .
    REF: similar modem pages confirm.

    step 3
    IF unsuccessful
    give feedback.
    Else
    step 4
    access the modem and set up for PPPoE
    "Always On" connection.
    Uncheck "Bridged' In WAN edit page.

    THEN
    confirm connected to Internet
    Feedback.
    INfo wanted: Change Dir300
    Ip address . 192.168.2.1
    Step 5:
    Dir300:
    Confirm you have installation CD
    and follow the wizard , if available.
    feedback for more ====>>>

    Update: Need Device info or screen shot of Tad100 device info page.
    Modem may be similar to Ut300r2u new) or Beetel 220Bx family.
    confirm this page. ( software details may be different )

    many thanks for u r detailed reply, essebebe.
    DIR-300 came with installation cd-confirmed.
    tried following the wizard, in win xp, failed to detect the dir-300(new) router
    booted in win 7 ultimate.
    followed the dir-300 setup wizard properly
    detected the router, installed it correctly..
    all this time, the TAD100 modem in bridged mode.
    configured the wireless router(dlink) in dynamic pppoe.
    using wireless channel 6 .
    wi-fi now up and running. tried the ipod touch with wi-fi.
    now able to browse using ipod touch.

  13. #13
    LEARNER
    Join Date
    Aug 2007
    Liked
    28 times
    Posts
    15,323

    Default

    @lakshmanvvs
    Congrats.
    1.
    kindly post these data for records.
    Updateinfo:
    ipconfig /all for both LAN and Wlan.
    2.
    Anyway kindly save/backup the present/ settings in modem and Router to say
    C:/My Documents / modemrouter settings.

    This menu item will be under management tools or Maintenence Tools.
    3.
    Presume you have used secure key for WIFI>

  14. #14
    Junior Member
    Join Date
    Jan 2010
    Liked
    0 times
    Posts
    9

    Default ipconfig /all settings in win 7

    Windows IP Configuration

    Host Name . . . . . . . . . . . . : Laki-PC
    Primary Dns Suffix . . . . . . . :
    Node Type . . . . . . . . . . . . : Hybrid
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No

    Ethernet adapter Local Area Connection:

    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Intel(R) 82566DC-2 Gigabit Network C
    tion
    Physical Address. . . . . . . . . : 00-1C-C0-38-F6-88
    DHCP Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    Link-local IPv6 Address . . . . . : fe80::bd24:56ae:fcd5:7c2a%11(Preferr
    IPv4 Address. . . . . . . . . . . : 192.168.0.102(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Lease Obtained. . . . . . . . . . : Wednesday, January 27, 2010 3:43:50
    Lease Expires . . . . . . . . . . : Wednesday, February 03, 2010 3:43:50
    Default Gateway . . . . . . . . . : 192.168.0.1
    DHCP Server . . . . . . . . . . . : 192.168.0.1
    DHCPv6 IAID . . . . . . . . . . . : 234888384
    DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-A9-1F-D4-00-1C-C0-38-

    DNS Servers . . . . . . . . . . . : 192.168.0.1
    NetBIOS over Tcpip. . . . . . . . : Enabled

    Tunnel adapter isatap.{A8F1B19D-3D20-4CB9-88B7-48D0E6E51FC0}:

    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft ISATAP Adapter
    Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. suggestion required
    By apoorv1988 in forum BSNL broadband
    Replies: 3
    Last Post: 04-25-10, 08:10 AM
  2. Replies: 3
    Last Post: 04-14-10, 01:59 PM
  3. urgent help required in bsnl home 1350 plus
    By Sahil_kr in forum BSNL broadband
    Replies: 4
    Last Post: 02-19-10, 05:26 AM
  4. Urgent help required
    By mickey in forum Windows
    Replies: 3
    Last Post: 02-04-10, 10:27 PM