Thread: Wlan not working with PSP(playstation portable)

My psp is detecting the SSID and the signal strength is also a 100%.I tried connecting via open network settings without any pre-shared key and also using wpa-psk settings with a security key.both did not work well.When i try to connect my psp it always shows dns error 80410410.My psp is of the latest 3001 series with a firmware 6.20.i tried connecting to my friends wi-fi using my psp and it worked fine so the problem lies with my wlan.

1. Configure your modem in PPPoE.

2. Enable DHCP in your modem.

3. In the TCP/IP properties of your connection, set " Obtain IP address automatically ".

Thanks for replying...i had tried the above steps and my internet stopped working if i change from bridging to PPPoe.So can you explain the proc in a more detailed way like from after logging in as admin in the dsl router window or provide screen shots or which ever is convenient to you thanks again.

my internet stopped working if i change from bridging to PPPoe

Mention the modem/router/model/make. and the wifi router if any.
Check whether listed in this link. Also mention your ISP.
UTSTAR WA3002-G4 quick reference

2.Copy/paste the following data here.

Procedure
Start RUN type cmd
Ok
New window
type ipconfig /all

<my.imageshack.us/v_images.php> you will find my wireless settings here my modem make is ZXDSL 531B also i attached my ipconfig image.Sorry for my late replies.

Imageshack needs log in.
Repost in tinypic.com

Check M.P or Chennai Website for Power Point presentation and screen shots in link WA 3002-G4 in post No 4.
Signature may or may not appear here.

<[IMG]i55.tinypic.com/24pynx4.png[/IMG]> add http to the link as i am not allowed to post url's yet. hope i hear from you soon ty.

[IMG]i55.tinypic.com/352lob6.png[/IMG]

[IMG]i53.tinypic.com/2u55ibs.png[/IMG]

[IMG]i54.tinypic.com/hwegyg.png[/IMG]

[IMG]i51.tinypic.com/erfzfr.png[/IMG]

[IMG]i53.tinypic.com/bgqsr7.png[/IMG]

[IMG]i51.tinypic.com/erfzfr.jpg[/IMG]

http://i54.tinypic.com/hwegyg.png
You are still in "Bridged" mode.

1.
Open wan page. Uncheck "Bridged" select PPP/PPPoE
enter userId and Pw in lan page.
2a.
In lan page ( or elsewhere) if UpNp box is available enable it.
Also DHCP> range 192.168.1.3 to say 192.168.1.10.
2b.
Laptop worked on Internet in LAN mode./ ( "bridged" mode )

3
Also same ipconfig /all data for wlan set up required.
4.
Your modem/router appears to be ZTE ZXDSL 531B,
and detailed Power Point presentation is available in M.P bsnl web site ,
as well as step by step instructions.
Check wa3002-g4 link below.

5.
You can use full http// and use as insert here jpg pictures. .
( delete existing http) reduce size to avoid scrolling.
Click the Postcard type ( yellow icon here )

thanks for your effort mate i seriously owe you one....anyways i ran into a old archive in the year of 2008 where you suggested some one to look up imanishtanwa.blogspot it helped me solve the puzzle thanks again.

link for IBF here:
http://www.indiabroadband.net/bsnl-b...html#post28158 (How to Connect ZTE ZXDSL 531B with wireless card)
for reference:
manish tanwar: Configure (connect) BSNL Type II (Type 2) Modem - ZTE ZXDSL 531B

2.
Thanks for reminding about the link. I could have stored the link in my Home computer,
but The first LiNK here in my signature also gives enough info.
( Now using a Mac with a 27" LCD screen )
http://www.indiabroadband.net/bsnl-b...tml#post157723 (How to connect your i-phone on Wireless router (ZXDSL 531B))
3.
Presume you used the SEARCH box above.
One more with screen shots.
http://foribb.blogspot.com/2008/05/c...-in-pppoe.html