Thread: D Link dir-600 as an acess point

Friends,
Now I have setup my d link dir-600 as an acess point but i am not able to connect to internet wirelessly.pl.help

1.
Check MTU value in GLB502T. try 1492.
2.
Mention adsl modem used. make/model/number
3.
Connect in PPP/PPPoE mode ( userId/PW entered in WAN page of modem) Enable DHCP.
4.
Copy/paste hereipconfig /all for WLAN network. If LAN is working compare.
5.
Check guide by @just4kix in Broadband How to ....." forum. for similar setup. adsl modem +wifi router.

Dear Essbebe,
I had problem with some websites.They did not load at all.Therefore,I had planned to setup my wireless router D Link DIR-600 as an access point.But now I have reconfigured the router as a regular wireless router manually and after changing the MTU value to 1442,everything is working fine.The sites ,which did not load earlier,are now loading.Thanks Essbebe for your quick reply.

Noted. have a look at this link
select a web site which did not open earlier.
Usually MTU is reduced from 1500 to 1492 etc ( multiples of 8).
MTU Ping Test
http://help.expedient.com/broadband/mtu_ping_test.shtml

dear
i have zte zxdsl 831aii modem with bsnl ul connection
now i have purchase a d link dir600 wifi router
problem is ethernet cable from router works perfactly but wireless connection shows network but when try to connect it gives error....

dear essbebe
i have zte zxdsl 831aii modem with bsnl ul connection
now i have purchase a d link dir600 wifi router
problem is ethernet cable from router works perfactly but wireless connection shows network but when try to connect it gives error....

@udgirv
1.
Enable DHCP in router.
2.
Connect in"Always On" PPP/PPPoE mode
( userid and PW entered in wan page of modem )
3.
Please copy/paste here. ipconfig /all data for wlan
( no tunnel data reqd if your OS is vista and above )
procedure :
START/RUN type cmd OK
New window
type ipconfig /all

Originally Posted by essbebe

@udgirv
1.
Enable DHCP in router.
2.
Connect in"Always On" PPP/PPPoE mode
( userid and PW entered in wan page of modem )
3.
Please copy/paste here. ipconfig /all data for wlan
( no tunnel data reqd if your OS is vista and above )
procedure :
START/RUN type cmd OK
New window
type ipconfig /all

Wireless LAN adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : local.lan
Description . . . . . . . . . . . : Atheros AR9285 Wireless Network Adapter
Physical Address. . . . . . . . . : 70-F1-A1-37-E3-72
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : local.lan
Description . . . . . . . . . . . : Realtek PCIe FE Family Controller
Physical Address. . . . . . . . . : C8-0A-A9-3C-33-0D
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

ethernet cable from router works perfactly

Please edit your post and delete tunnel data.
Scrolling the page again again is bothersome.
Your ipconfig /all data does not confirm above statement in LAN

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : local.lan
Description . . . . . . . . . . . : Realtek PCIe FE Family Controller
Physical Address. . . . . . . . . : C8-0A-A9-3C-33-0D
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

example:http://www.indiabroadband.net/attach...m-ipconfig.doc.

Confirm you changed to PPP/PPPoE mode.

Wireless LAN adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : local.lan
Description . . . . . . . . . . . : Atheros AR9285 Wireless Network Adapter
Physical Address. . . . . . . . . : 70-F1-A1-37-E3-72
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : local.lan
Description . . . . . . . . . . . : Realtek PCIe FE Family Controller
Physical Address. . . . . . . . . : C8-0A-A9-3C-33-0D
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::f07e:832f:4012:ab0d%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.0.102(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Sunday, October 17, 2010 7:20:50 PM
Lease Expires . . . . . . . . . . : Monday, October 18, 2010 9:19:27 PM
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 192.168.0.1
DHCPv6 IAID . . . . . . . . . . . : 247990953
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-2B-49-1A-C8-0A-A9-3C-33-0D
DNS Servers . . . . . . . . . . . : 192.168.0.1
NetBIOS over Tcpip. . . . . . . . : Enabled

1 dhcp on router is enabled
2 pppoe is enabled on modem
3 i m working with ethernet connection from router
4 os is win 7 ultimet