Thread: Need help

Recently i switched my internet provider from Tata wimax(512kbps) to Bsnl(2mbps) broad band.. now as soon i run the game before game screen get load net will be disconnected.. and some times it will not disconnect and i can play... i have attached screen shots please chek into this and help me..

Please mention modem - model and make.

^^
modem is type 1 UT-300rtu and model no T1-B-DSL699E9.4U6-5.

Which mode are you using ? PPPoE or Bridge ? Try PPPoE and check.

Disable firewall and check.

Which is the connection mode ? Ethernet or wifi ?

Which game is causing problem ? Does it a happens with all other games ?

This may help

http://www.indiabroadband.net/broadb...tml#post284265 (ut300r2U essbebe's compilation)

how to chek wich mode i am using??
btw i have chked when i disabled firewall .. and i am using ethernet i think it is a wired connection not wifi games are World of warcraft worlds no 1 online MMORPG game and a3-india ..

How do you connect to net ? Simply by switching ON the modem or Clicking " connect " in a dialer ?

just switch it on and use it ...

my plan is 2mbps till 25gb of download and it will be 512..

Try port forwarding. Select a guide from portforward.com and see.

How many system do you use ? If more than one, better avoid bridge configuration.

If you are comfortable with modem configuration, try configuring in bridge mode and check.

Log into the modem, in the 0_35 entry, choose between bridge and PPPoE. Log out, create a dialer and click using " connect " in the dialer.

You can switch back to PPPoE using this guide

UT-300R2U ADSL MODEM MULTIUSER CONFIGURATION

i think i am using pppoe_0_35. when i went to 192.168.1.1 and login in trouble shooting thread i saw select internet connection ther it was like pppoe_0_35..

its for home use ... i am using for a single pc

Ok, try bridge mode and check. In the 0_35 entry, click " Edit " and choose bridge mode and check.

Which model matches your unit's screen shots ?

The little I know about Dataone Broadband Services offered by BSNL
The little I know about Dataone Broadband Services offered by BSNL

how can i change it??? can u plz explain??

chek the screnie and explain plz

For further discussion please refer link below:
Teracom ( ignore wireless pages )
http://*******************/index.php?topic=2444.0

Post your unit's similar first screen shot in above link>

You need to click " Edit ". After this you will be asked for a option to choose from Bridge or PPPoE.

sad man .. who will help me ??

ohh oke let me try.. sorry for the previous mess

after i click on edit i came to this page what i have to do now??

chek this ..............................

Click " next " until you find an option to choose between Bridge and PPPoE.

ther is a option but i am not abel to change it.. any other way to change it?

check these screenies also..

are u guys ther??? dilip and essbebe??

Please remove your ID from screen shot 3. Normally the " bridged " option should work. Since it is grayed out, wait for further comments. You may also try port forwarding. Gives more or less similar results. As mentioned above find out the port in use and forward it (from portforward.com).

okes i have removed my id. and will try port forwarding.. hope u guys find a solution soon .. i am bugged with this stuff

in portforwarding they are asking 30$

Originally Posted by bla321

in portforwarding they are asking 30$

Skip that page, that is an ad.