How to make Netgear wgr614v10 as repeater when 450bx1 is the router

Hello,

I have a Beetel 450bx1 router whose coverage is disappointing, I have a spare netgear wgr614v10 router which I wish to use as a wifi repeater to extend the range of the router.

I am a noob in this field, so could someone guide me on how to do the same ?

Thanks
Singh

1.
Ensure you get wifi mode in your laptop. with( Beetel450BXI)
If your OS is windows 7 download application
"connectify"
2.
Check whether you can pick up different wifi SSID's

3.
Connect from LAN1 or LAN2 rj45cable to the Netgear
Internet (WAN port ) use the wizard.

4.
mention distance/height involved.

5.
Both wifi routers cannot "handshake " in wifi mode.

6.
Check wa3002-g4 link below to set up Beetel450BXI.
7.
Any additional information from you.

Reply item wise for further suggestions.

Originally Posted by essbebe

Ensure you get wifi mode in your laptop. with( Beetel450BXI)

I can access net with 450bxi

If your OS is windows 7 download application
"connectify"

Using Vista

2.
Check whether you can pick up wifi SSID'

am able to connect to net with 450bx1

3. Connect from LAN1 or LAN2 rj45cable to the Netgear
Internet (WAN port ) use the wizard.

there is an issue with the netgear wizard and the net doesn't work, should I enable dhcp or not ? what should be the ip addresses ? et

4. mention distance/height involved.

10-20m/same floor

5. Both wifi routers cannot "handshake " in wifi mode.

wgr614v10 has a wireless repeater setting can that help ?
I was hoping if this could be done, because 450bxi has wds enabled.

Check wa3002-g4 link below to set up Beegtel450BXI.

okay thanks

@singhdfi
Check your USERCP for 21 rep points for perfect response/replies..

2.

am able to connect to net with 450bx1

3.Connect from LAN1 or LAN2 rj45cable to the Netgear
Internet (WAN port ) use the wizard.
there is an issue with the netgear wizard and the net doesn't work, should I enable dhcp or not ? what should be the ip addresses ? et

Check in Broadband How to ....."forum a guide by @just4kix
for using Netgear wgr614v9 wifi router. try Download direct.
http://www.indiabroadband.net/attach...r-wgr614v7.zipl

The IP address is normally given in the label of the unit. Mine shows 192.168.1.1
You should change it to say 192.168.1.2 or 192.168.2.1
( 192.168.1.1 reserved for Beetel 450BX)


quick points :
(a)
you should be connected in "Always ON" mode
( userId/PW entered in modem 450BXI wan page )

(b)
Enable DHCP in Beetel 450bXI 192.168.1.3 to .192.168.1.10.

(c)
screen shots annexed from my working Netgear wifi unit
(i am using different IP's using voip unit also )

Para two:
(d)
Try to keep the Beetel 450BX at a higher height.
Position it parallel to the ground and rotate the unit to check
max wifi signals at target area.
(e)
an additional antenna ( higher gain type can be used )
(f)
Regarding wds "handshake" will reply later.
( ensure both units are in same channel say Ch11 )

rep++(21) to @singhdfi