Thread: BSNL broadband connection issue!!!!!!!!!

I have my modem configured with the bridge modem and my laptop has been working just fine. I now have a Samsung Galaxy Tab, and although the Wifi is detected, I am not able to browse. Do I need to change anything in the router?

Originally Posted by alokn99

I have my modem configured with the bridge modem and my laptop has been working just fine. I now have a Samsung Galaxy Tab, and although the Wifi is detected, I am not able to browse. Do I need to change anything in the router?

Try this

http://www.indiabroadband.net/broadb...tml#post325614

Can i create a connection from network connection-add a new network connection???????

Originally Posted by sumeetm4u

Can i create a connection from network connection-add a new network connection???????

Yes, delete old dialers and create a new one. It should work for you.

I don't have any old dialer..Plzzz tell me how to create a dialer???????? I created a dialer but it shows WAN PPPoE is not reachable..

Are you in Bridge mode ? If yes,

Go to " Network and Sharing center " ," set up a new connection or network " and create a dialer. Please note that first you need to be in bridge mode before you create a dialer using your ID and password.

In my ATM protocol 1483 bridging option is available can i change it from PPPoE to 1483 bridging...

@moderator
Please shift to BSNL forum.
@sumeet4u
PPPoE DIALER INSTALLATION

@alokn99
For Samsung Galaxy access to wifi.
Instead of "Dialer" mode change over to PPPoE " always on
( store/enter. USERID/PW in WAN page )
Enable DHCP. for ref:
http://www.calcutta.bsnl.co.in/dataoneinstall/mu04.html

@ sumeetm4u

Please don't confuse yourself.

Log in to the modem > WAN page > 0_35 entry > Edit >

Use this screen shot to change to bridge mode

http://www.indiabroadband.net/broadb...tml#post329150 (BSNL broadband connection issue!!!!!!!!!)

Save it and create or use existing dialer with your username and password.

I changed but it showing WAN minport cannot reachable.And the bsnl guy tell me that it does not support bridge mode........

Ok, forget about bridge mode, use the " auto connect " dialer and check in PPPoE. Hope you know how to configure your modem in PPPoE. If not, try this guide

New Page 1

@meetdilip
user back to square 1 !

My modem name is DNA-A201BE-1 (type 1).The technician said that it does not support bridge mode..

@post screenshot of WAN settings page of your modem as attachment
screen shot here. showing "RFC 1483 bridging" option. etc. with other options PPPoE. ( see link "monitor" below")

Immediate: Switch off modem Now.
Start at 0750 AM continue surfing.
Check in Broadband usage portal time blocks. later.
Repeat: same at 0145 AM switch off modem
start again at 0155AM use scheduler etc.
check usage portal readings latter.

WAN setting page of my modem......

I downloaded BB scheduler 3.0. It allows local area network to enable or disable at specified time. Plzzzz, tell me if i on my pc at 10 pm and enable connection at 2.15 am it can calculated as free usage???????? Can it also reboot the modem????????