Results 1 to 3 of 3
Like Tree1Likes
  • 1 Post By AR Acharya

D-Link DSL-2750U Wireless N300 ADSL2+ 4-Port - Wi-Fi Router to access BSNL FTTH broa

  1. #1
    Junior Member
    Join Date
    Mar 2016
    Posts
    2

    Default D-Link DSL-2750U Wireless N300 ADSL2+ 4-Port - Wi-Fi Router to access BSNL FTTH broa

    D-Link DSL-2750U Wireless N300 ADSL2+ 4-Port - Wi-Fi Router to access BSNL FTTH broadband service

    I have recently changed from BSNL broadband wired connection ( using D-Link DSL-2750U Wireless N300 ADSL2+ 4-Port - Wi-Fi Router) at my residence to BSNL FTTH connection. This FTTH connection uses AONT-100C high speed Broadband modem .

    I wish to continue to use D-Link DSL-2750U Wireless N ADSL2+ 4-Port with AONT- 100C, as LAN to connect to the desk top with Wi-Fi to access other devises. For this, I understand, I need to configure one of the four ports of D LINK DSL 2750U as Ethernet WAN.

    I have seen all suggestions given by the Broadband forum and am not successful in setting up. I am in Bangalore. Can you/ any one help me step by step guide to install it successfully.

    I shall be highly obliged for a quick workable response.

  2. #2
    Bronze Member
    Join Date
    Jan 2009
    Posts
    222

    Default

    I don't think you can 'covert' a LAN port into a WAN port. D-link DSU-2750U doesn't have a WAN port, so you can't use it for the FTTH .
    You have to buy some other simple wi-fi router that has a WAN port and use it.
    Regards,
    Shrinivas

  3. #3
    Junior Member
    Join Date
    Mar 2016
    Posts
    2

    Default

    Quote Originally Posted by pshrinivasan View Post
    I don't think you can 'covert' a LAN port into a WAN port. D-link DSU-2750U doesn't have a WAN port, so you can't use it for the FTTH .
    You have to buy some other simple wi-fi router that has a WAN port and use it.
    D link User manual under "ETHNET WAN set up" indicates that this is possible to convert a LAN PORT to WAN--through manual ETHNET WAN set up so that this devise can be used with changed internet service. via cable/FTTH. by assigning a ETHNET port to be a WAN Port.

    I see from here it is possible. I just need the possible commands to get this done , as I seem to be missing on some minor point.
    SmoothVibes likes this.

Similar Threads

  1. D-Link DSL-2750U 24 Mbps Wireless with Modem Router
    By gouravgupta2003 in forum Computer Accessories
    Replies: 3
    Last Post: 19th July 2015, 09:14 AM
  2. D-Link DSL-2750U ADSL2+Wi-Fi Router with Modem Reliance Broadband
    By suchintkotia in forum Reliance Broadband
    Replies: 6
    Last Post: 23rd February 2015, 04:19 PM
  3. Replies: 9
    Last Post: 13th January 2013, 11:49 AM
  4. Replies: 0
    Last Post: 22nd October 2012, 07:33 PM
  5. Replies: 2
    Last Post: 21st October 2012, 12:41 AM