Results 1 to 8 of 8

Thread: Need Help with configuring Beetle 450Tc1

  1. #1
    Junior Member
    Join Date
    Dec 2009
    Liked
    0 times
    Posts
    3

    Default Need Help with configuring Beetle 450Tc1

    Hi,

    I have an internet connection with a local internet service provider, who probably have the server through airtel. I used to have beetel 450Bx1 which got misplaced or stolen during some renovation work at my home.

    Everything had been fine till now, and the model was working fine and providing wireless connection as well. but now as i could not get 450Bx1, I purchased 450TC1 which is showing trouble in configuring. The internet service provider provide static IP, and requires configuring primary and secondry DNS on the model to make it work as a router, but both myself and the engineer from the internet service provider were not able to find a place where we could enter details for primary and secondry DNS.

    BX1 did have an option to enter the DNS numbers but TC1 probably does not have one.

    Can someone who has used beetel 450TC1 please advise.

    Regards,
    Leejoh

    Also, as if now the engineer has enabled bridge connection after entering the primary and secondary dns in the local network on the PC. Internet is working fine but wireless is not working.

    As well as I need to connect 2 systems at the sametime which is also not working now.
    Last edited by leejoh; 12-22-09 at 06:46 PM. Reason: Automerged Doublepost

  2. #2
    LEARNER
    Join Date
    Aug 2007
    Liked
    21 times
    Posts
    15,307

    Default

    Please check Beetel450TC1 may be similar to WA3002-G1
    1.
    the engineer from the internet service provider were not able to find a place where we could enter details for primary and secondry DNS.
    comparison page/screen shot for DNS entries.
    http://img200.imageshack.us/img200/8...ninterface.jpg
    2.
    modem settings step by step
    WA3002-g1 (Type-II) ADSL MODEM MULTIUSER CONFIGURATION

    3.
    Internet is working fine but wireless is not working.
    Setup instructions wireless with screen shots
    WA3002

    4.
    I need to connect 2 systems at the sametime
    (a)You may have to change from Dialer Mode to "Always On " PPPoE mode.
    (b)Enable DHCP in modem.
    (c)In computer network settings LAN/WLAN
    TCP/IP properties.
    Obtain Ip address automatically.
    (d)DNS use google new 8.8.8.8 and opendns 208.67.222.222

    feedback.

    Para two: Always mention the service provider BSNL Airtel etc
    minor changes required. in modem/router settings.
    (5)
    IF STILL PROBLEM:
    IN COMPUTER

    Start RUN type cmd OK
    New window
    type ipconfig /all
    Copy/Paste data here ( No edit )
    If OS is Vista only ethernetcard and wirelessLancard details page. needed.

  3. #3
    Junior Member
    Join Date
    Dec 2009
    Liked
    0 times
    Posts
    3

    Smile

    Thanks for the response.

    I am not at home now, so will not be able to check now, just want to mention again that the service provider is not one of the national provider, just a local one running the show. Only gives static IP

    Hope the the setting that you provided is not specific to BSNL or Airtel

    Will get back with results.

    Cheers!!

    Regards,
    Leejoh

  4. #4
    LEARNER
    Join Date
    Aug 2007
    Liked
    21 times
    Posts
    15,307

    Default

    Since it is working now on a single system
    no need to change VPI/VCI UserId/PW etc.
    Static IP given, is for you to access the ISP.

  5. #5
    Junior Member
    Join Date
    Dec 2009
    Liked
    0 times
    Posts
    3

    Default

    Right its working on a single system now, and thats through bridge connection.

    Also, I was reviewing the details provided on
    maharashtra.bsnl.co.in/ssa/nashik/wa3002.htm]WA3002
    calcuttatelephones.com/dataoneinstall/mu08.html]WA3002-g1 (Type-II) ADSL MODEM MULTIUSER CONFIGURATION

    as my service provider hasn't provided any username/password do you think selecting PPPoE/PPPoA would work.

    The only username and password i have been provided by them is to be used on a connection software called Cyberoam Client for 24Online.

    Regards,
    Leejoh

  6. #6
    LEARNER
    Join Date
    Aug 2007
    Liked
    21 times
    Posts
    15,307

    Default

    6.
    Save /back up present working settings
    in modem to say
    C:/My Documents/IBF/ modem settings ok
    ( see under Maintainence /tools )
    Presume in dialer mode. now.
    7.
    PPPoE Always On needs UserId and PW to be entered in the modem.
    The connection software may be a dialer window to connect in "Bridged" mode.

    8
    Try only the Wireless settings.
    No other change required.
    Get the laptop to work in Lan mode.
    Then WLAN mode.
    9
    Using two systems later.
    10.
    Cyberoam Client for 24Online
    will reply later.
    Google search : for user guide.
    Last edited by essbebe; 12-22-09 at 11:20 PM.

  7. #7
    Junior Member
    Join Date
    Mar 2009
    Liked
    0 times
    Posts
    2

    Default disk for router

    hey any one having disk for 450tc1 beetel router or manual plz post

  8. #8
    LEARNER
    Join Date
    Aug 2007
    Liked
    21 times
    Posts
    15,307

    Default

    @lovpartner
    Presume you cannot connect to Internet.
    To start,http://www.maharashtra.bsnl.co.in/ssa/nashik/wa3002.htm see this link and try.
    Also:
    http://www.calcuttatelephones.com/da...all/mdm08.html
    Feedback.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. help configuring Dlink DSL2640T
    By Sherinkapotein in forum BSNL broadband
    Replies: 13
    Last Post: 02-25-10, 01:51 AM
  2. Replies: 2
    Last Post: 02-05-10, 09:10 PM