Thread: How to configure BEETAL ADSL2+ WIRELESS ROUTER 450TC1 BSNL BROADBAND

plz help me how to configure BEETAL ADSL2+ WIRELESS ROUTER 450TC1 TOO BSNL BROADBAND, PLZ SEND ME WITH SNAP PHOTO'S

If you are connecting to Internet Using a Dialer
( entering userid/PW in system window )
RESeT 450TCI to factory settings and try.
Feedback.
PVC 2 with vpi/vci 0 and 35 for BSNL.
Connection status page. for reference.
http://www.indiabroadband.net/attach...ci-status1.jpg


More screenshots:
http://www.indiabroadband.net/bsnl-b...tml#post327997 (cannot connect to internet)

hi i bought a beetel 450tc1 adsl2+router from my friend who was using it with AIRTEL connection and i have BSNL and i wanted 2 use it through wifi.i get 2 wirless conection i.e AIRTEL and MGMNT whn i connect 2 airtel it does not get connected and whn i try connecting 2 MGMNT it asks for a security password before which i cant log to192.168.1.1 also 2 change the settings...plz help its urgent

If the SSID MGMMT appears in your latop use security code 987654321
given in same page . This is default value set by Airtel. Even if connected to BSNL BB this will work.
If you don't like this , you may have to downgrade the Firmware.AT YOUR OWN RISK ( Not absolutely needed )

2.
If you want your own SSID select No 2.
3.
How many SSID's are seen in your wifi network screen ?


5
.

i cant log to192.168.1.1

try userID admin PW password.

Feedback.

hi essbebe,
firstly i didnt get wht does ssid means?and i tried the security code but it didnt work.well good news is i tried loggin in 192.168.1.1 and i succesfully logged in..well can u help me now to change the settings so tht i can use BSNL broadband..
If you want your own SSID select No 2.--->i didnt get this ?

How many SSID's are seen in your wifi network screen ?if i m not wrong wht u asked thn i think 2 ssid come one is AIRTEL(which does not connects as mine is BSNL)and second is MGMNT(which asks for the securitycode)

as i can now log in 192.168.1.1 can i change the setting there where i can use the internet..i even tried reseting it to factory settings but tht AIRTEL AND MGMNT is still coming .thanks in advance

essbebe thanks for the information yes there r 2 SSID i.e AIRTEL and MGMNT..well the good news i got connected to MGMNT for which the security code is 0987654321.thts done..but now i cant surf as no pages r opening..everything is checked but only one thing its showin as PPP UP..u can see it in the attachment i have send .as u said airtel will also get connected but i m using broadband of BSNL.as whn i try 2 connect to airtel its askin for admin and password again. (thanks in advance..

Recheck settings with link given in my previous post.
Lan mode:
If checking in wifi mode remove the lan cable Rj45.
check Diagnostics page.

essbebe i followed the steps in urs previous send link the results i have send as attachment plz do see them .as u told me to remove the lan cable Rj45 and try.whn i try doing this the 198.168.1.1 opens and only shows the status and no other options appear.and the last thing is the ADSL Status is not shown connected and shows PPP UP.as i have send u in the previous attachment thank you

connection failed PPP UP
http://www.indiabroadband.net/attach...d-snapshot.jpg
Diagnostics fail:
http://www.indiabroadband.net/attach...iagonosis-.jpg
Additional box for VOIP/IPTV
http://www.indiabroadband.net/attach...methingnew.jpg


Please post the top of Status page. showing Firmware version.
could be different.if you don't have VOIP or IPTV ignore those settings.
Use dns 8.8.8.8. and 8.8.4.4 in modem.( for test purpose.)
MTU value default 0 ? or try 1492.

Always try in LAN mode and get connected first.
Still problem post the screen shots of the set up pages

If you select PVC0 to PVC7 one by one check the error in ADSL status .no other details needed.
Feedback.

essbebe once i did the steps u told me but unforunately no sucess..so i m attaching the setup screen shots of firmware version,internet setup,lan setup and wireless setup.if any more screenshots required plz tell me.well i also tried selecting the pvc o to pvc7 but the ADSL status is same like before ..any more information then let me know.if any changes to be made plz tell me in detail in the respective screenshots.thank you

All settings OK. including Diagnostics page.
In wireless page select channel 11.
Check this: and give feedback.

wait...... check this . button :click near the PVC selected in WAN page.


If still no connection: change to `"1483 bridged mode" and try.

Use "Dialer to connect.
Check Diagnostics page again.

Feedback.

essbebe i did as u told me to do..results same.sending u snapshots of service info and diagnosis after changing the settings u told me to do..also tried the bridged mode but its not showin connected..the internet light on the modem only is not becoming on whn on bridged mode..thanks in advance..in the diagnose window if i restart system with default factory setting thn will the airtel settings be deleted and modem will become like new..

1.
(a)
When you select 1483 Bridged mode for VPI/VCI 0 and 35 for BSNL
Presume you used a Dialer to enter Userid and PW in window of computer.
(b)
Check in Access Management ACS etc disabled.

2.

if i restart system with default factory setting thn will the airtel settings be deleted and modem will become like new.

.
AIRTEL default entries will remain. ALL VCO's in bridged mode.

If still "NO GO" are you prepared to try /downgrade the firmware?
AT YOUR OWN RISK

yes i used a dialer has i used with my previous modem but its not getting connected.well essbebe i need to downgrade the firmware and why not upgrade?wht r the risk if i upgrade/downgrade the firmware and is it sure tht it wil work after upgrading or degrading.

ok fine will wait for the connected thread till then i will try once again the previous steps..

2. Some users had problem in wifi settings page.
the following Firmware was tried to reset default
values set by AIRTEL.


Beetel 4-0Q-016 size 1.31 MB.


this is the firmware i shld download?

YES give feedback.
After wards give the firmware version loaded in status page .

essbebe if i downgrade or upgrade can i rollback the previous firmware if i want to..or i cant..or is there any risk tht the modem will not work in future ..

How do you get/save the old firmware file ?

What is the point in having a firmware which does not work with BSNL ?
wait;
for official AIRTEL firmware link for Beetel 450TCI.
http://122.166.105.80/Firmwares/Beetel%20450TC1/
TM4-0Q-008 seems downgrade.
check your version.now. seems latest
TM4-OQ-025

,Mine Beetel110TCI ( no wireless ) TIB-0Q-005 working ok for BSNL.

To try file :Beetel4-0Q-016 size 1.31 MB.
FW version; : Beetel4-OQ-016 CONFIRM>

essbebe i downloaded tht file and downgraded the fw is have send u a screen shot..now let me know wht shld i do..i tried the previous setting but its not working out...plz let me know in detail setting to use the wifi thank you ..anything else required plz let me know

plz let me know in detail setting to use the wifi thank you

Seems now you are connected in LAN mode. confirm
bottom of page status missing.
India Broadband Forum

yes connected through lan ..i thought u wanted the screen shot of the fw only..

Congrats. Ok.

Try SSID1 or ssid 2 any name
select Channel 11.
screen shots :
Check ITEM 005 in previous link Post No 16. given. ( BSNL Maharastra)
Feedback.

yes i will be thankful if u provide me a specimen screenshot ....so u mean 2 say my lan is working?but i tried 2 connect but its not getting connected?ok i wil provide u full detail of the status page

First confirm you get connected to Internet in LAN mode,

wifi page:
( from old records ) now enter your own ssid and security key.

http://i56.tinypic.com/209owb7.png

essbebe once again tried according to urs guidance all the lights r blinkin,WAN status its showin connected but in ADSL status its showing PPP UP as u can see in the attachment respectively.thanks for the help so far.whn i run the diagnoses it same like before first 2 and last 2 are pass and middle 2 r fail..is there anything else to be done buddy.