Error 619 Bsnl 3g Guys finally bought idea netsetter(e1550) and unlocked it and using with tata docomo and airtel sim but whenever i connects with bsnl sim it gives error 619 plz help me and kindly post settings for data cards. bsnl sim is workin fine in mobile with same settings
its better to put a screenshot of error..........waiting.
With few series its aknown issue where in the west they are giving error messages, better to go for another model and get it replaced from the store you bought.
Here is one solution tried by another forum member , see if it works ...
Hello all,
I was also in same problems and spent days to find a solution including hours at BSNL technical cess for 3g at Ahmedabad Gujarat. Nothing worked. Till I did following.
Well I have been fortunate to find a possible solution to this Huawei 1750/1752/1550 modems not working in BSNL 3G etc. I have bee able to get my huawei e1752 working in AHmedabad with BSNL 3G sim and vodafone sim (normal 2G) in more than 1 PC/Laptop using inbuilt software dialer programme Mobile Partner version 16.00---- and firmware 11.126.03.----.
I will appreciate, once you find this solution working, if you copy paste this on any and all forums so that people will stop wasting hours and stop worrying how to connect their modems for 3G service. Here is what I have to say & suggest & I hope it will work for all. Now I want to activate voice call which is still not working.
a) Huawei e1550/1750/1752 USB data card IS WORKING on BSNL 3G in Gujarat. At least I am in Ahmedabad and it is now working. SO DONT BE IN A HURRY TO INCUR MORE COST ON ANOTHER MODEM, before trying some steps as I did and got it working.
First of all as far as I can gather from scores of forums for India 3G, mobile broadband technical forums/guides and forums for overseas mobile 3g/broadband providers' websites, this seems to be a problem of identifying and linking windows native NDIS drivers with incoming 3G signals/ internet data through USB Modems like Huawei and others. The forums are full of issues with usb 3g data cards either working/not working with some service providers' sim cards or with some windows OS but not with some other sim or windows OS. OR they are able to connect with dialer software of data card but not with windows dialers or vice-e-versa. The problem lies in failure matching (or making them talk to each other) of Windows OS native mobile broadband drivers and sim usb modems/BSNL drivers or in wrong (or by default) selection of RAS mode in modem dialer software in place of NDIS mode of connection. Where there are NDIS mode is selected by default in dialing software of any USB data card, this connection problem will not arise. Well not going into too technical details, to start using your USB Modem/Data Card, be it Huawei or Taracom or any other, pl try the following. (Pl note that I am not a technical person and may have wrongly described the reason). Anyway following did the trick.
First of all, CHECK - if you are getting an option to selectconnection mode of either RAS or NDIS mode in your Mobile Partner connection software from Huawei or in your COnnection software which came with the USB Data modem. After installing Mobile Partner/other connection software which came with the USB Modem, open Tools and select Options in drop down menu of Mobile Partner or similar dialer software. In window that opens for Options, click general tab on laft hand side panel (it will open to General by default). In main window below Start up box there should be another box "Connection Type" giving 2 options to select from RAS (Modem) and NDIS. Select NDIS or it should be selected by default. In most cases the Mobile Partner software has not installed properly and this RAS/NDIS Connection option is not there when we open software. Then the sim will not connect to internet. and it starts cry for help on forums and blaming BSNL or others.
If this Option (RAS/NDIS) is not there, and you are not able to connect, the software Mobile Partner or sone NDIS drivers are not installed and you need to completely CLEAN your computer and REINSTALL the Software. If trace of earlier installation remains, it will create problem and subsequent installations will not be properly done. The problem will remain. SO follo the following steps for properly reinstalling the softwares & drivers INCLUDING AUTO INSTALL OF NDIS Drivers by Windows update once they detect mobile broadband software and hardware including sim.
PART A : CLEANING EXISTING/PAST SOFTWARE & their traces.
b) First try a total uninstall of huawei or any other modem which you had installed/tried to instal. While uninstalling remove USB Modem. It should not be in usb port.
c) Run CCleaner for registry and disk BOTH. Clean/fix all issues. Several items of removed software will be deleted.
c) ENSURE THAT USB MODEM IS NOT IN CONNECTED IN USB PORT, Open regedit (start>in search box type regedit >enter. It will be shown at top in the Start Box. Open it. In the Regedit (registry editor) window highlight (select) Computer at the top and from edit drop down menu, select find and in find box type Mobile Partner or name of your dialer software which came with usb modem/data card. Select key, data & Value boxex below search what box Clock find or enter.
d) It will find such registry key which will have name of Mobile Partner. Delete that key/data/value bearing name of Mobile Partner. BE VERY CAREFUL. MISTAKE CAN HARM YOUR COMPUTER. BUT CORRECTLY DOING THIS STEP WILL NOT HARM YOUR COMPUTER. If whole Key folder on left hand side in reg edit window bears name of software, delete full key or if on right side in reg edit window, only any value/data contains name of Mobile Partner or name od dialer software which came with USB Modem, ONLY THAT SHOULD BE DELETED on right hand side in the reg edit window.
e) click edit menu and in drop down manu,click find next. This will find another key/data/value of Mobile Partnet or other dialer software for which you are finding the reg key/value/data. You will find several such keys etc even after you have removed software and used CCleaner. Delete each one by taking care that only relevant key/value/data is deleted as mentioned in (d) above.
f) Find next will also fins some keys/value/data where name mobile partner or dialer software name will not be clearly mentioned. It will be blank or nil value. AVOID DELETING such items. Just find next item WITH name of software and delete it.
f) after all key/value/data bearing name of mobile Partner or such dialer software is deleted and find next gives no more key, again select computer on top of reg edit windows and from edit manu, click find. In find what box type Huawei or your data card manufacturers name and click find/enter. Same as above delete keys/values/data having the name of USB manufacturer till all such entries are deleted. CARE as in (d) above should be taken while deleting any entry.
g) Restart. Again repeat process mentioned in d,e & f as above.
h) Restart.
B REINSTALL
Now your computer is ready for reinstallation of software which came with your 3G USB data card/modem.
a) Check version of your software & firmware. It should not be too Old otherwise it will not have voice/video features. Also always use company's original software. If not available search internet and download ORIGINAL Company software, as far as possible.
a) Remove sim card form USB 3G data Card/modem and insert data card in USB port of computer and wait for a few seconds till computer finds usb modem. There should open a pop up notification window for installing hardware etc. click on it to view installation. Drivers will be installed by windows OS.There should be at least 6-7 items which will be installed one by one. Be patient. After this is complete, and devides installed message comes on top left hand of the window and after even a minute, there is no activity, or further installation, close window. USB Modem will automatically restarted and a window for removable disk with options for open folder, auto run etc will open. Try auto run. Click on it and let installation complete automatically. If auto run does not work, open folder and double click on datacard software application. (Not version 64). Afrer dialer software installation is complete, again installing new hardware/driver notification pop up will be there. click on it and see that it is again installing all hardware/driver for mobile and storage with some more. Let the installation be complete. Wait. Modem will restart itself again. NOTE THAT MODEM HAS TO RESTART AND MODEM SHALL HAVE TO BE RECOGNISED BY WINDOWS AS (VIRTUAL) CD DRIVE.
b) Remove usb modem and restart.
c) Insert sim card in usb modem and insert it in usb port of your computer. Close window for removable disk. Let all drivers/hardware IF it finds, be installed and after modem is restarted automatically, remove modem and restart IF any new driver/hardware was found & installed.
d) Open Mobile Partner or modem providers dialer software. Go to Tools>options and open. In general tab, below Start up Box, under Connection type NDIS option should be automatically selected or select it. Set up Profile with dialing no. & APN (static selected mode) save and make it default.
e) In device manager in Control panel in Hardware & sound or phone & modem, select usb modem and right click it, select properties and click advanced tab. In extra iniatiliasion string copy paste this : at+cgdcont=1,"IP","bsnlnet" if you are having BSNL sim. In another service provider, replace bsnlnet by APN of that service provider.
f) on connection tab, ensure your default connection is selected and click on connect. Connection should be established.
C. RESTORING MODEM SOFTWARE TO ITS FACTORY SETTING :
g) If still any problem, start a hyperterminal window (NOT MS DOS PROMPT) or use putty terminal application. (download a small file from google search). Open putty and select serial port and put com port no. of modem (get it from control panel>hardware>device manager>modem> huawei modem right click> properties>Modem tab. There on left top corned below the table, com port no. is mentioned. Put this com no. in putty, after selecting serial port and enter. A hyperterminal window will open connected to that com port of USB Modem. Type at and enter. It may nort shoe in window (what you type) if you want to see what you type try, type echo on and enter and it may show what you are typing or may not. Dont bother. Type AT enter. Answer will come as OK. Again type AT & it wil reply OK. Now type ATZ and reply will come OK. repeat it 2-3 times. USB modem will restart each time and be patient.
h) Remove usb modem by safely removing hardware and reinsert it in usb allow computer to detect modem. Start dialer software. In options in Network, select WCDMA only and All bands
select OK and click on connect.
Connection should work.
D HOTFIX for frequent disconnection of connection
(though it is for IE connection, it is working in all computers and browsers/downloaders)
i) If it disconnects frequently, pl download this small update from Windows for USB Ports and install it. When you try to download a file from the Internet by using Internet Explorer, the download stops responding (Validation required) or from here Windows6.1-KB925681-x86.msu -> Language Neutral Windows 7 Hotfix Downloads -> Language Neutral Hotfix Downloads -> Downloads
I assume APN, bsnlnet and other dial up connection settings like try 99 times, pause between redial never, check redial when connection is not present etc are done in windows dialer if you want to use it. But most likely it will not work OR it will work and Mobile Partner will not work.
Pl give me feedback and let all know if this works, so he will get the update.
Thanks Sir,
Thank you very much for your guidance, I will try this Technic and will let you know. I am also Ahmedabadi and facing the same problem. Kindly let me know regular BSNL 3G card for mobile will suitable for this USB modem? or I need to go for USIM?
Thanks again.
The regular BSNL 3g sim works fine with the usb modem.
Hello All,
I have got huwaei k3520 and huwaei e169g modems in ahmedabad both are unlocked and working with all the sims except BSNL 3G/2G. It gives error 619 in mobile partner ver 16. firm ware 11.314.xxxxx . I have tried all the possibilities described in this thread by @dushie but could not get success to access bsnl 3g. Currently i have not taken any data plan just want to start the modem work then will go for the data plan 4200. But having enough balance on it. Anyone can u please help me out to get this work. I am trying since last 10 days but not working.
It will be really appreciated if you help me out
Anybody interested in buying K3520 modems ? brand new already unlocked with vodafone.
I have used it for 1 week with tata docomo and now i want to use bsnl 3g but its not working in this model in bsnl west zone i.e Ahmedabad
So i am willing to sell or swipe with any working modem in west zone with bsnl 3g
It will be cheap deal. reply me if you are interested
Last edited by vijaydabhi; 12-20-10 at 05:30 PM. Reason: Automerged Doublepost
already tried with my k4505 buddy...not working with it in BSNL West zone...Originally Posted by sarashvi
thanks anyways...
if anyone finds it working in bsnl west please post here...
Finally Got success in getting connected with Huawei K3520 in BSNL West Zone Hooray
Finally Got success in getting connected with Huawei K3520 in BSNL West Zone, Ahmedabad Gujarat. Kindly note that this solution worked in Windows only. This might work with any modem of huawei in west zone with BSNL 3g
Download T-Mobile Software ( Please note that this is only software works )
TM_webConnect_2_05_0036_0_Setup.exe
from : www[dot]mediafire[dot]com/?yc0q403cs84wp8p]E1750Update_11.126.13.00.157.B418.exe[/url]
Install Software ( leave mobile partner installed as you might need to use your datacard as call , because this T-Mobile software doesn't have calling feature )
Tools > Profiles
Add > Broadband
APN : bsnlnet
leave dialing number as *99***1#
click next give any name
click finish
now insert datacard in USB Slow and make sure T-Mobile software is running.
click on Broadband Tab
click on connect and it will be connected
In case you get Error 678 ( which I just came accross ) Do the following
Tool > Profiles > Your connection > Edit
Under Broadband Type
PDP Type
select IP
and save
mine k4505 is not getting detected with this software
thanks dear my e160 is working with BSNL 3g in West Region
Thanks a lot........... to vijaydabhi for this brilliant discovery.
i was struggling to get bsnl 3g working in west zone on my unlocked Vodafone k3565 (E160).
I had purchase another modem UMG1831 to use BSNL.
Then I saw your thread and got the solution.
Thanks again.
Regards
preetam
Use TMobile WebConnect Dashboard for using BSNL 3G SIM in all modem error 619
Hey Friends
For all those getting Error 619 with BSNL 3G in modems like E1750 / E160 etc, please try using T Mobile WebConnect Manager (which comes with modem UMG 1831).
This Dashboard supports BSNL 3G and works fine, I got success with my E160 (Voda K3565).
If you get success, do remember to put your post here for everyone's benefit
Best Luck
hello everybody. I am new to this forum. I am also ahmeadabadi, Satellite-Prahladnagar garden area. Well my case is a bit different. With huawei umg1831 i am able to connect only outside my house or on the terrace with good speeds of abt 1.5 to sometimes 3mbps. But in my house the signal turns green from blue and shifts from wcdma 3g to bsnl edge. Also if i try to connect using 3g only mode inside the house, not able to connect or able to connect with no network access. I am using both mobile partner software(provided with huawei) and mdma.
Plz HELP!!!!!!!!!!!!!!!!!!!!!!!1
my firmware is 11.831.05.01.420 . on searching in net i found about 11.831.05.01.420 B427. are both same or different. Also since i am getting the signal only on my terrace and not inside home should i update the firmware of umg1831.
Last edited by adityaseju; 02-01-11 at 12:31 PM. Reason: Automerged Doublepost
Error 619 Bsnl 3g hi aditya ! According to me there is nothing to do with the firmware of modem in reception of network. you have to try using Usb extension for ur modem. it may help you. regards n cheers http://www.indiabroadband.net/bsnl-3...mg-1831-a.html (Extension Cable for Heuwai UMG 1831)
Well according to those reviews even the cables do not catch consistent signals. Or is it just due to network congestion in my area. My house is only about 4-5 kms from vastrapur bsnl tower. can i get help from the network coverage services in vastrapur. Sources say they are very friendly, just thinking they might deny help as i am using huawei(umg 1831) and not their data card.
If error 619 occurs
Step 1: Restart your computer. If you still have the error, go onto step 2
Step 2: Delete your BSNL connection.
To delete your BSNL connection, right-click the mouse button, and left-click on Delete. Then reinstall BSNL according to the XP directions. If this does not correct the error, go onto step 3
Step 3: You now need to remove the modem.
Go to Control Panel, Phone and Modems, Modems tab. Highlight the modem, and click on Remove. After which, close everything, restart your computer and Windows will reinstall the modem for you.
This is a 'bug' in the Windows XP operating system. It may or may not occur.
try using hotspot shield to overcome network congestion.
huawei e220 get connected with steps Thanks to this forrum tips
i have successfully get connected to bsnl 3G data sim,
and usig it properly
I have just followed the simple steps
1) update the firmware
2) cleaned my PC completely with available utilities
3) Installed the T mobile software and entered *99***1# in dial number
i got connected
it is not working with *99#,
Thanks Vijaybhai
how do u do that ? And this is wat i use
Device
Device name: UMG1831
Application port: COM13
Hardware Version: CP1E1831M
Firmware Version: 11.831.05.01.420
Software Version: 16.001.06.01.500 FaKiro
SIM/USIM
Own number(MSISDN): Unknown
Messages in SIM/USIM: 0 / 40
Contacts in SIM/USIM: 0 / 500
Message center number: +919422099997
PIN code status: Ready
Network status
Network name: BSNL 3G
RSSI: <= -113dBm
CS network registration: Registered
PS network registration: Registered
PS network attachment: Attached
Network settings
APN: bsnlnet
Network selection mode: Automatic
Are drivers the latest or do i need to update ?
your modem firmware is latest. your RSSI[ Received signal strength indication] readings are much poor. that's why you can't connect.Rssi parameters are as follows:The signal strength for all received packets. The color of this parameter's progress bar provides a visual interpretation of signal strength.
Value:
•Excellent (green): -57 to -45 dBms (75 to 100%)
•Good (green): -75 to -58 dBms (40 to 74%)
• Fair (yellow): -85 to -76 dBms (20 to 39%)
• Poor (red): -95 to -86 dBms (0 to 19%)
•No Link hotspot shield is a software.google it and download it run it.may be it helps.
hey thanks 4 d help. I ve installed hotspot shield but how to use it ?
Dear Aditya ! your network reception is very poor . IMO hotspot will not help you.Hotspot is applicable when you have good quality signal and there are so many users on single IP address. hotspot provides secure ip address only for you without sharing with anyone else. you have to look for other service provider with good reception at your house.regards.
Hey lubob. Thanx 4 all d help. I got my modem replaced and now everything is fine.
U wont believe that my speed reaches to 4 mbps sometimes wen i get good signals. Now i connect from my home as well.
you are always welcome. anytime . is the new modem also umg 1831 ? how is the RSSI parameter in diagnostics ?
ya. its umg 1831. rssi is b/w -95 to -101.
There are currently 1 users browsing this thread. (0 members and 1 guests)
LinkBack URL
About LinkBacks
Reply With Quote