Hey guys i am getting tremendous ADSL Link Speed as compared to 2048kbps link speed in downstream and 256kbps in upstream. Can anybody explain this? Thankyou.
Hey guys i am getting tremendous ADSL Link Speed as compared to 2048kbps link speed in downstream and 256kbps in upstream. Can anybody explain this? Thankyou.
Hi this is not correct and possible case may be there is an issue with modem right now like its frozen or under any interface.
try to reboot your modem and i am sure you are not getting that much speed, are you![]()
this link speed means the line sync rate between your modem and exchange![]()
I am getting speed upto 2mbps only. I have reset the modem many times but the case is the same. If i connect the splitter after passing the main phone lines through junction box, then i get ADSL Downstream Link Speed around 6500 kbps. What is the deal? Thanx for ur concern.
Check speed at speedtest.net say Brisbane server in both conditions.
Phone/s normally connected AFTER the ADSL splitter.
The line speed also depends on the Mod selected. adsl2, ADSl2+ GDMT, T413 etc.
they are upgrading link speeds.. i have 6 or 8mbps for iptv.. but download speed is only 2mbps.. this is mostly for iptv.. unless bsnl are planning to upgrade all of us to 8mbps download speeds![]()
I am not sure how you are getting the speed.You can conduct the speed test to check the speed.Technically this is not possible.
Can anybody explain abt ATTENUATION and SNR values? What r the min. value for these two? Am i getting it correctly? (See first thread pic).
mine is showing less speed after my line was accidently messed up by bsnl repairman
ADSL upLink Speed 297 Kbps
ADSL downlink Link Speed 1097 Kbps
these bsnl guys has messed up my 2046 kb speed conection while repairing my neighbours one
i need to complaint to the divisional engineer 1 mb speed and no telephone connection
snr should be atleast 10.. or 12.. your SNR is just on the border line.. ensure that all telephones are connected after splitter.. you could infact connect the modem to the splitter correctly and then disconnect all telephones temporarily and then check SNR, if it improves then you have to get your telephones connections correctly..
There are currently 1 users browsing this thread. (0 members and 1 guests)