Thread: please help needed urgently

i just want to clarify the speed of bsnl UL750 plan . i have searched the forum but all results were confusing . some of them say they get 30KB/s = 240kb/s.
but i get only 30kb/s . i am about to meet BSNL division manager so i wanted to clarify the speed from you people . please reply .

Do one thing... go to speedtest.net and do a speed test and post your result here or a screen shot of your result.

the speed is 256 kbps i.e. 32 KB/sec ok not more than this, could be below , but not more

Originally Posted by sb21pro

the speed is 256 kbps i.e. 32 KB/sec ok not more than this, could be below , but not more

I should atleast get around 100kbps na. i never crossed 30kbps.

Originally Posted by Admin

Do one thing... go to speedtest.net and do a speed test and post your result here or a screen shot of your result.

sorry but i am writing this from a internet cafe . so right now its not possible

wel the speed also depend on the server load
so ask ur neighbors , how much speed r they getting
i suggest u consult ur exchange as well

was your speed ok before? i mean for how long is this happening ?

The speed of the 750 ul plan is 256 kilo bits(kb). And 256 kilo bits is equal to 32.KB(kilobytes).

A bit is the smallest piece of data (a 1 or a 0) that a computer recognizes. A byte is series of 8 bits.

1024 bytes = 1 Kilo bytes
1024 Kilo bytes = 1 Mega bytes
1024 Mega bytes = 1 Giga bytes

Internet Service Providers mention speed in kilo bits to trick people. Download/Upload speed is really measured in Kilo bytes.

Kb/kb is kilobits (k and b or just b in small letter)

KB is Kilo bytes (K and B in capital letters)

If you are getting 30 KB(kilobytes) its a good speed

Hope this helps!

If you are getting 30 KBPS (kilo bytes per second) speed then your connection is fine. Go to www.speedtest.net and do a speed check. If the results show your download speed is anything near 256 kbps (kilo bits per second) then your connection is fine.

thanks guys now the problem is solved

Originally Posted by coolz

thanks guys now the problem is solved

Glad to help.

It would be nice of you to post here what the issue was... so if someone in future comes with the same query will get to read how you solved this issue... if it ever existed.