Thread: How to configure modem for always on

i am having frequent disconnection problem and every time i have to again log in so what if my modem is in always on mode i dont have to log in again after reconnection?

My modem is SmarTAX MT 882
OS: Winxp sp2

1.Open Modem and see the Summary page.
Report Mod selected SNR U/L D/L Attn U/l D/L Line speed D/L U/L.
2.Also Start/ RUN type cmd type ipconfig/all. Give data here.

REF:
calcuttatelephones.com/dataoneinstall/mdm03.html

ipconfig:

Windows IP Configuration


Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) 82566DC Gigabit Network Connection
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.1.10
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1

PPP adapter BSNL:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
Physical Address. . . . . . . . . : 00-53-45-00-00-00
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 59.93.74.154
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 59.93.74.154
DNS Servers . . . . . . . . . . . : 218.248.240.181
218.248.240.23
NetBIOS over Tcpip. . . . . . . . : Disabled

i am attaching Smartax MT882 summary
plz solve the problem

1.In wan page Default Gateway has it been enabled?
2. Enable DHCP and give range 192.168.1.2 to 192.168.1.20 ( No harm)
3. Check in Diagnostics page . ( except usb OAMf5(2) all should pass.
4. Netbios overTCP/IP should be default ( look under TCP/IP Advanced WINS)
para two : you are still in dialup mode.
Uncheck "Bridged" in wan page.
Check ppp/PPPoE
enter your UserId ( without @ bsnl.in and password)
enable "always on" idle time =0 ) Save Reboot. Wait for 2 or 3 minutes.

thanks bro its working in always on mode thank u very much

sir



again i am having problem in always-on mode and the problem is
i am not connectable to torrents it says some firewall is blocking i also enabled DHCP, changed lan ip 192.168.1.1 to 192.168.1.20 and also under tcp/ip advance WIN is in default mode still i am not connectable to torrents
so what i did is i changed to bridge mode and tested firewall now
its ok. So plz help me what i missed in alwayson mode. i am
attaching summary of ppoe mode. I request you to give complete details to change to alwayson mode in modem configuration. Why i want to change in alwayson mode because my bb connection is disconnecting frequently and i have to always go on to dial my connection again n again. Plz help me

As per attachment you are now connected in "Always On " mode.
The "NOTE" icon has to be clicked ,
when modem restarts again ,say after power failure.
I have the same problem and no idea how to solve this.
In "Bridged" this may not be necessary.
You have to connect externally via dialer .
See portforward.com for torrents PF instructions.
Check with this tool .
DynDNS -- Support Tools -- Open Port Tool

Check your RJ11 connection contacts for blackening/corrosion/oxidization etc. Attn is high.

as mentioned by essbebe.. you need to portforward . this should help you with that Prashanth Speaks-Technology and Life: Portforwarding through Virtual Server in huawei SmartAX,netgear and dlink routers .. and about the disconnection..ensure that your telephone is connected after the splitter.. go to http://192.168.1.1 and under status post your SNR..