Thread: UTSTARCOM WA3002-g1 Wireless ADSL Router - Multiple connectivity problem

I have problem in connecting 1 LAN, 1 wi-fi or 2 wi-fi connectivity to BSNL DataOne simultaneoualy.

UTSTARCOM WA3002-g1 Wireless ADSL Router

I tried everything BSNL Kolkata help site, but no success.

Using Bridge connection, I know my connection can only works either on LAN or Wi-fi (single user access at a time). But when I configure PPPoE with always on + username/password settings, my connection doesn't connect to internet.

Please help, i'm too frustrated

Thanks in advance!

Go through the steps again. WiFi later.
Modem/router WA3002G1.
===1.Initial Setup of WA3002-g1 ADSL Modem
=====2.PPPoE DIALER INSTALLATION
=======3.WA3002-g1 (Type-II) ADSL MODEM MULTIUSER CONFIGURATION

if you still have problems.. post a screenshot of your WAN pages after you have configured it to ppoe mode..

Addl reference : with screen shots. for model WA3002-G4. should be similar settings
Chennai Telephones- Changing password in DataOne Pre-configured modem