India Broadband Forum

biki · 10-12-08, 10:05 PM

Hello everyone.. please help me out.
I have a laptop and a pc. I am using Dataone SL2_141 modem.
While forwarding ports in hyper terminal, i mistakingly restored everything to default. My original connection was like this.

My PC was connected to the modem by a ethernet cable, (I dont know its PPPOE or BRIDGED connection ) But yes, Whenever i switched the black switch (on the back of the modem) on, it would connect automatically. It used to connect using Marvell Yukon 88E8001/8003/8010.

My laptop (HP 520) has a small button on it which when pressed would detect a wireless network (named Pluto). Pressing Connect Button would ask for a key (which was 'qwerasdf'). Then it would connect fine.

But now everything has gone away. The PC connects and all lights glow, but not a single webpage opens. And the laptop connects now to a connection named Default (with no network key needed). But here also, no webpage opens.

CAN I GET MY ORIGINAL CONNECTION CONFIGURATION BACK (with same connection name and network key)??
I NEED THE SAME NAME AND KEY AS MY FATHER ALSO USES IT AND WOULD NOT LIKE MY ACTION OF RESTORING IT TO DEFAULT. INITIALLY HE GOT IT CONFIGURED BY A SERVICE ENGINEER. BUT I DONT WANT HIM TO KNOW ABOUT THE PROBLEM !!!

please help

essbebe · 10-12-08, 10:45 PM

SL2_141 (Type-B) ADSL MODEM MULTIUSER CONFIGURATION
Get desktop connected to Internet.
Then WIFI settings.

biki · 10-13-08, 06:31 PM

thank you so much..
it worked great..

But there's a change now.. While connected thru' my laptop, previously it showed a speed of 11Mbps. Now it is showing 54Mbps.

Why has this change occured..?? Please tell !!

essbebe · 10-13-08, 06:37 PM

CONGRATS.
Why worry ? you are getting Higher speed listed ! enjoy.!
( please post screen shot of that page )
As long as WIFI works smoothly, note down the correct settings in a notebook. ( better still make screenshots)If there is any problem try to restore old settings.
Hope you have given security code to avoid using your WIFI network by others in neighbourhood.

ADD above website to your BOOKmarks/favorites.

biki · 10-13-08, 09:12 PM

screenshot of which page ???

essbebe · 10-13-08, 09:24 PM

@biki

Quote:

screenshot of which page ???

routine request ! not needed. sorry.
Will show in the task bar ! 'WIFI icon' MINE now

Quote:

48.0 mbps Signal Strength Excellent Status connected

abhinavsg · 10-14-08, 03:15 PM

hi guys,

I'd also reset my ADSL Router SL2_141 & then configured as per the details given by essbebe.

Able to connect to the internet via the router on the pc, but when i try to connect my N95 8GB via wifi, I can not.

I scan for available WLAN from N95 8GB, it shows "default" found. Then I click on "Start Internet Browsing" on my phone. The phone asks for the "Key".

After I enter the key, my phone shows connecting & then after 10 -15 secs it shows the error message

WLAN :
Unable to connect
WLAN not found

Please help

10-12-08, 10:05 PM	#1
biki Junior Member Join Date: Sep 2008 Age: 19 Posts: 5 Rep Power: 2	SL2_141 restored to default. I want my original configuration back. Please Help Hello everyone.. please help me out. I have a laptop and a pc. I am using Dataone SL2_141 modem. While forwarding ports in hyper terminal, i mistakingly restored everything to default. My original connection was like this. My PC was connected to the modem by a ethernet cable, (I dont know its PPPOE or BRIDGED connection ) But yes, Whenever i switched the black switch (on the back of the modem) on, it would connect automatically. It used to connect using Marvell Yukon 88E8001/8003/8010. My laptop (HP 520) has a small button on it which when pressed would detect a wireless network (named Pluto). Pressing Connect Button would ask for a key (which was 'qwerasdf'). Then it would connect fine. But now everything has gone away. The PC connects and all lights glow, but not a single webpage opens. And the laptop connects now to a connection named Default (with no network key needed). But here also, no webpage opens. CAN I GET MY ORIGINAL CONNECTION CONFIGURATION BACK (with same connection name and network key)?? I NEED THE SAME NAME AND KEY AS MY FATHER ALSO USES IT AND WOULD NOT LIKE MY ACTION OF RESTORING IT TO DEFAULT. INITIALLY HE GOT IT CONFIGURED BY A SERVICE ENGINEER. BUT I DONT WANT HIM TO KNOW ABOUT THE PROBLEM !!! please help Last edited by biki; 10-12-08 at 10:05 PM. Reason: Automerged Doublepost

10-13-08, 06:37 PM	#4
essbebe Platinum Member Join Date: Aug 2007 Location: Chennai Posts: 4,246 Rep Power: 12	CONGRATS. Why worry ? you are getting Higher speed listed ! enjoy.! ( please post screen shot of that page ) As long as WIFI works smoothly, note down the correct settings in a notebook. ( better still make screenshots)If there is any problem try to restore old settings. Hope you have given security code to avoid using your WIFI network by others in neighbourhood. ADD above website to your BOOKmarks/favorites. Last edited by essbebe; 10-13-08 at 07:21 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2 seconds to know original citizen calculator	aprilsagar	News from the Tech and IT World	14	09-02-09 07:09 AM
SL2_141 Nokia Siemens Modem wifi configuration	sayanb	BSNL broadband	11	06-05-09 11:31 AM
Forum interface has reset to original	just4kix	Suggestions and Complaints	9	08-06-08 10:55 AM
Original IP assigned to me??	saesms	BSNL broadband	12	07-29-08 06:45 PM
router not accepting its default password	niraj8241	BSNL broadband	3	01-25-08 03:33 PM

10-12-08, 10:45 PM	#2
essbebe Platinum Member Join Date: Aug 2007 Location: Chennai Posts: 4,246 Rep Power: 12	SL2_141 (Type-B) ADSL MODEM MULTIUSER CONFIGURATION Get desktop connected to Internet. Then WIFI settings.

10-13-08, 06:31 PM	#3
biki Junior Member Join Date: Sep 2008 Age: 19 Posts: 5 Rep Power: 2	thank you so much.. it worked great.. But there's a change now.. While connected thru' my laptop, previously it showed a speed of 11Mbps. Now it is showing 54Mbps. Why has this change occured..?? Please tell !!

10-13-08, 09:12 PM	#5
biki Junior Member Join Date: Sep 2008 Age: 19 Posts: 5 Rep Power: 2	screenshot of which page ???

10-14-08, 03:15 PM	#7
abhinavsg Junior Member Join Date: Oct 2008 Location: Durgapur, West Bengal Age: 27 Posts: 11 Rep Power: 2	hi guys, I'd also reset my ADSL Router SL2_141 & then configured as per the details given by essbebe. Able to connect to the internet via the router on the pc, but when i try to connect my N95 8GB via wifi, I can not. I scan for available WLAN from N95 8GB, it shows "default" found. Then I click on "Start Internet Browsing" on my phone. The phone asks for the "Key". After I enter the key, my phone shows connecting & then after 10 -15 secs it shows the error message WLAN : Unable to connect WLAN not found Please help

India Broadband Forum

SL2_141 restored to default. I want my original configuration back. Please Help

SL2_141 restored to default. I want my original configuration back. Please Help

Similar Threads