Thread: Help with Broadband connecting

AnnexA should be equvalent to G.DMT

@cableguy
Thanks.
@siriustds
better select something instead of NONE.
select annex M auto and try. Usually adsl or adsl2+ select
higher line speed but unstable for us.
Save and reboot.
check speed for each setting.
Idea is to get a stable connection with reasonable speed.

see this also

IMPORTANT: If your modem does not achieve an Annex M line sync, it may negotiate a standard Annex A connection, or it may fail to connect at all.

If you are unable to re-establish ADSL line connectivity after following these steps, please return your modem configuration to Annex A modem, and/or return your service to a standard ADSL2+

Originally Posted by essbebe

@cableguy
Thanks.
@siriustds
better select something instead of NONE.
select annex M auto and try. Usually adsl or adsl2+ select
higher line speed but unstable for us.
Save and reboot.
check speed for each setting.
Idea is to get a stable connection with reasonable speed.

see this also

Well i have changed it but through telnet , cudnt change it from the browser ...Output



Line Rate 38641
Tx Cell Transmitted 0
Rx Cell Received 0
Cbr_CPS 0
Rvbr SCR_CPS 0
Vbr SCR_CPS 0
Rvbr PCR_CPS 0
Vbr PCR_CPS 0
Ubr_CPS 7242
Ubr MCR_CPS 0
CACMode Simple
CACFunction 0x2002a4cc
Port Speed Hook 0x00000000
Vpi Range 8
Vci Range 16
Default Pcr 0
Traffic Shaping false
Ni Type uni
Is Dsl Dma Up 1
Enabled Channels 4
Driver Version 1.75
APIVersion GS_API_626
Firmware Version E.37.7.37
Dsp Version 0x00000090
Common Handshake Disable
Connected true
Operational Mode G.Dmt
State Showtime
Watchdog 0x00000053
Operation Progress 0x000000ad
Last Failed 0x00000000
Tx Bit Rate 512000
Rx Bit Rate 2048000
Rx ATTNDR 5232000
Code Type Status AnnexA
Tx Cell Rate 1207
Rx Cell Rate 4830
Phy TXCell Count 1728
Phy RXCell Count 420
Phy Cell Drop Count 0
Overall Failure 0
Data Boost Disable
Local ITUCountry Code 0x0000b5ff
Local SEF 0
Local End LOS 0
Local SNRMargin 20.5 dB
Local Line Attn 28.5 dB
INPup 0.0
INPdown 0.0
PMstatus L0
Raw Attn 28.5 dB
Local Tx Power 12.3 dB
Local Fast Channel Rx Rate 0
Local Fast Channel Tx Rate 0
Local Fast Channel FEC 0
Local Fast Channel CRC 0
Local Fast Channel HEC 0
Local Fast Channel NCD 0
Local Fast Channel OCD 0
Local Interleaved Channel Rx Rate 2048000
Local Interleaved Channel Tx Rate 512000
Local Interleaved Channel FEC 0
Local Interleaved Channel CRC 2
Local Interleaved Channel HEC 0
Local Interleaved Channel NCD 0
Local Interleaved Channel OCD 0
Remote Tx Power 18.9 dB
Remote SEF 0
Remote LOS 0
Remote Line Attn 15.0 dB
Remote SNRMargin 24 dB
Remote Fast Channel FEC 0
Remote Fast Channel CRC 0
Remote Fast Channel HEC 0
Remote Fast Channel NCD 0
Remote Interleaved Channel FEC 0
Remote Interleaved Channel CRC 0
Remote Interleaved Channel HEC 0
Remote Interleaved Channel NCD 0
Local Mgmt FEC0 0
Local Mgmt CRC0 0
Local Mgmt FECErrored Sec 0
Local Mgmt Errored Sec 0
Local Mgmt Severely Errored Sec 0
Local Mgmt LOSErrored Sec 0
Local Mgmt Unavail Errored Sec 0
Local Mgmt HEC0 0
Remote Mgmt FEC0 0
Remote Mgmt CRC0 0
Remote Mgmt FECErrored Sec 0
Remote Mgmt Errored Sec 0
Remote Mgmt Severely Errored Sec 0
Remote Mgmt LOSErrored Sec 0
Remote Mgmt Unavail Errored Sec 0
Remote Mgmt HEC0 0
Local TPSTCCell0 0
Local TPSTCCell0Upper Layer 0
Local TPSTCBit Error 0
Remote TPSTCCell0 0
Remote TPSTCCell0Upper Layer 0
Remote TPSTCBit Error 0
PSDMask Status Standard
Status Fail Count 0
Profile Status MAIN
Action Startup
Activate Line None
Line Status false
Host Control Enable
Auto Start true
Failsafe false
Showtime Led 2
Retrain EnableOverallOnly
Defaults None
Line Mode None
Whip Disable
Whip Active Inactive
Happy Mode Enable
PMmode L3NotAllowed
Dying Gasp Enable
Utopia Interface Level1
Physical Port 0
Clock Type Oscillator
Profile MAIN
Detect Noise Disable
Max Interleave D 64
SHalf Disable
Cabinet Mode Disable
PSDMask AnnexM-EU60
Standard Unknown (542)
Ec Fdm Mode EC
Max Bits Per Bin 15
Tx Start Bin 6
Tx End Bin 63
Rx Start Bin 6
Rx End Bin 511
Rx Auto Bin Adjust Disable
Tx Attenuation Bis_0DB
Bit Swap Enable
Bit Swap Up Enable
NTRMode Disable
Code Type AnnexA
Max Down Rate 511
Capability GDMT
Coding Gain auto
Framer Type Type3ET
Fast Retrain Enable
Reset Defaults false
Port Snmp If Index 0
Port Snmp If Type 0


How about it , is it correct ???

New test result
www_speedtest_net/result/340998612.png