Thread: Help me for error 678 in iti router DNA-211-I

From my when i connect using my dialup its says error 678 remote server not responding me help me for solution

Use the Search before you post...

Ur solution is right here....

Error-678

This is most common problems. It is due to poor connectivity. Problem can be anywhere between B.RAS - Tier 2 - DSLAM - Modem - PC of the customer.

Switch off / Switch on Modem (Power Switch at the back of modem ) and wait for 2 minutes. Then retry.

If problem is not solved then Reset Modem [Back pin (in the hole) to be pressed in switched ON condition] [Note : Link PC in black type Modem or WAN / LAN in white type Modem will go Off and then ON and system may be stable. Then retry.

Problem is still not solved then a)Check link lamp in Black type Modem or WAN lamp in White Modem. If it is blinking, then it is line problem. b)Check Modem to splitter connectivity. i) Jack in & Jack out the cable of / to the modem and to the splitter ii)Jack in & Jack out the telephone connection of the splitter.

If lamp is still blinking - then it is due to poor line condition / fault. The case has to be referred to Area Broadband Team for attending the fault.

http://www.indiabroadband.net/bsnl-b...rors-bsnl.html (Guide to Troubleshoot Errors in BSNL)

Presume you were able to connect earlier to Internet, .
Confirm.
Try "Always On" PPPoE mode.
2. Access Diagnostics page in the modem , and report what has failed .