Thread: Wireless settings .. Help Help Help...

Hi Guys..,

I have the (ITI) DNA-A211-I ADSL2+ Modem issued from BSNL. When i tried to configure wireless setting ... m not able to browse . Actually i want my modem to connect internet to my laptop automatically when i turn on my Modem. So, i request you ...to help me step by step process (with pics),m using Laptop + Vista.

Thanks
Dataone

DNA-A211-I ADSL2+
..See these web sites.
....Probably your modem/wifi router modem pages are same.
.....confirm. http://i37.tinypic.com/2n7jhbk.jpg
...... Else post screen shot of Device status page.
.........REFERENCES:
http://www.chennai.bsnl.co.in/BBS/WA...eless_security
http://www.mp.bsnl.co.in/bb/wa3002g4/wa3002g4.htm

Doesn't work with those options, I believe can have wireless on, but need to be connected through a LAN cable to have the net accessed via wireless, I mean through other devices (mobile/laptop etc. Or may be I did it wrong, but need help on that

which modem do you have?? are you on ppoe mode?? do you wish to connect multiple pcs to the internet simultaneously?

Originally Posted by Dataone

Hi Guys..,

I have the (ITI) DNA-A211-I ADSL2+ Modem issued from BSNL. When i tried to configure wireless setting ... m not able to browse . Actually i want my modem to connect internet to my laptop automatically when i turn on my Modem. So, i request you ...to help me step by step process (with pics),m using Laptop + Vista.

Thanks
Dataone

ITI DNA-A211-I router settings for wireless

First of all we have to make a static ip so goto dos and type "ipconfig/all" leve this as it is

Goto control panel click network and internet >then under network and sharing center click view network status and tasks, then click Manage network connections.

now right click the wireless connection you connect with and goto properties.
select the one with (TCP/IPV4) and click properties

check "use the following ip address" in ip address put the ipv4 address which is in command prompt but change the last digit (eg: 192.168.1.2 make it 192.168.1.22) the digit you change should be between 10 to 249

put subnet mask then enter default gateway as it is in cmd

thne put the DNS server which is shown in cmd,

click ok and then close, your static i.p is set.

Now for making it work from the router goto router page click "Advance Setup" then "NAT" then "DMZ HOST" type in the ip address you made when you changed the last digits.

click apply and reboot modem.

Ok I have a HUAWEI modem supplied by bsnl and this is what I have done:

1. on my laptop wireless lan use the following IP address:

192.168.1.10
Subnet mask: 255.255.0.0
default gateway 192.168.1.1


preferred DNS : 192.168.1.1

2. Open browser and type the address http:/ /192.168.1.1
3. use the password admin
4. click on setup
5. click on PVC0 on the left hand side
6. UNDER TYPE select PPPoE
7. under user name give ur BSNL username and password
8. select apply
9. If you want to make it a secured connection ( which u shud) : go to ADVANCED and select wireless security.
10. Select WEP
11. Enable WEP secutiry
12. select a password ( it shud be a hexagonal number i.e AAAAAAAA7B)
13. Select apply again
14. goto the TOOLS tab and select 'system tool'
15. select save all
16. select restart
17. wait for a couple of minutes and u shud be online.

my PC too is connected via a LAN hub. To go online on the PC I have to just switch on the LAN hub and modem. (The lan settings shud be having similiar IP settings. Don't select the same IP address, make it 192.168.1.9 - rest shub be same).

hope this helps.

btw I have Vista Home Laptop and Win XP home PC