Thread: UT Starcom WA3002G4 >> Open DNS Setting

Hi,

I am using BSNL Dataone with UT Starcom WA3002G4 Router, i want to use Opendns.com and want to configure this router.

I tried but it seems fail or not configured properly. kindly suggest where i have to add the openDns address.

thanks in advance.

http://i23.tinypic.com/oidiro.jpg
.. check for similar page in your modem /router.
....Also in computer.
.....Start Network/LAN/Properties
......Select TCP/IP
........properties.
..........Enter DNS 208.67.220.220 and 208.67.222.222
...........These are OpenDNS values.

Reference:htt p://www.mp.bsnl.co.in/bb/wa3002g4/wa3002g4.htm#yes

Hi,

I did the same your suggest in JPEG file. but the site was not showning "you are using opendns"

kindly suggest.

https://www.opendns.com/homenetwork/start/device/router

I did the same your suggest in JPEG file

What jpeg file ? I suggested to enter in the modem settings page.
http://i23.tinypic.com/oidiro.jpg

but the site was not showning "you are using opendns"

Which site? OpenDNS site ?

Check Device Status . Sample page given below.
http://img76.imageshack.us/img76/3110/routeryy1.jpg


Watch this video:
https://www.opendns.com/homenetwork/start

write >> you suggested at >> tinypic

Kindly download at h t t p:// rapidshare .com/files/164896334/opendns_-_error.doc.html

I did the same setting you suggest.

thanks in advance

another way out , is to add the DNS servers in your tcp/ip properties of your computer .. you may need to shift to static ip for this .. look at step 5 screenshot Prashanth Speaks-Technology and Life: Internet Works on one PC but not on the Other - WINDOWS

I am using BSNL Dataone with UT Starcom WA3002G4 Router(4 port with Wireless, From Morning I cannot Access Internet, So I try to open with 192.168.1.1 threw Internet Explorer,So I found some Fail Message , Then I made Reset Threw UT Stardocom Window after that I Save Rebbot, after that when I connected the net cable from Router to Computer it's not functioning, If functioning I can go again threw 192.168.1.1.... But now with this router I cannot connect to Computer...I Think I did some mistake in this Router....

Please replay to me 1, How I can reset again this Router.(192.168.1.1 it not working , Because Router to Computer net cable not functioning, Cable is perfect only problem with router, I remove PP0e from router I think...please replay to me..please
Thanking You
JOJISH

Chennai Telephones- Changing password in DataOne Pre-configured modem
hXXp://www.chennai.bsnl.co.in/BBS/WA3002G4.htm
THE WEBSITE with screen shots.

REFerence:New Page 1
ht t p://www.mp.bsnl.co.in/bb/wa3002g4/wa3002g4.htm#yes
Download user manual also for future use.

Reset acceess/recess at the bottom a small round hole near the righ corner.
With power on press lightly for 10 to 20 seconds to restore to
default settings. . USE Only if you cannot access the modem/router settings.

web site ref given in Post No 2.
Repeated here.
New Page 1

I am using BSNL Dataone with UT Starcom WA3002G4 Router, i want to connect my iphone 3gs by wifi to this router. The iphone is recognizing the network but not accepting it for surfing.

Someone suggested me that i change my modem settings to "always on" mode. As suggested, i tried to change my modem settings to "always on" mode. but i am not able to access the ip 192.168.1.1.

please help....

@subashm1 Post No.9
UT Starcom WA3002G4
PROBLEM
to connect my iphone 3gs by wifi to this router.

but i am not able to access the ip 192.168.1.1.

(a)
Check my signature link 192.168.1.1.
Worst case RESET the modem to factory settings.
(b)
see this link for identical problem. Give required data.
http://www.indiabroadband.net/bsnl-b...fi-issues.html (Wifi issues)
http://www.chennai.bsnl.co.in/BBS/WA3002G4.htm

thanx essbebe

I appreciate your prompt reply. and also the link for chennai telecom.

but the problem is that this router setup window is not coming up when i type 192.168.1.1.

Howver, let me know if i reset my router to factory settings...then how to setup the modem again..

thanx in advance

Did you check any of the links given in my previous posts?!!!!!