Thread: Problem in bridge mode

Dear members,

My modem model name :UT300R2U
I am in 500c plan

Till now i am using PPPoE mode.
Today i tried using the bridge mode. It worked well but after 10 minutes the computer got hanged.so i rebooted it and again the same problem arises.

so now i have changed back to pppoe mode..

does anyone knows why bridge mode makes my system hang.

Statistics -- ADSL

Mode: ADSL2+
Line Coding: Trellis On
Status: No Defect
Link Power State: L0

Downstream Upstream
SNR Margin (dB): 30.4 15.7
Attenuation (dB): 21.0 8.3
Output Power (dBm): 12.3 18.1
Attainable Rate (Kbps): 24241 809
Rate (Kbps): 7996 707
MSGc (number of bytes in overhead channel message): 59 38
B (number of bytes in Mux Data Frame): 231 30
M (number of Mux Data Frames in FEC Data Frame): 1 1
T (Mux Data Frames over sync bytes): 1 1
R (number of check bytes in FEC Data Frame): 0 16
S (ratio of FEC over PMD Data Frame length): 1.0000 1.4688
L (number of bits in PMD Data Frame): 1856 256
D (interleaver depth): 1 2
Delay (msec): 0 0

Super Frames: 252200 256072
Super Frame Errors: 0 985
RS Words: 0 2566618
RS Correctable Errors: 0 39422
RS Uncorrectable Errors: 0 N/A

HEC Errors: 0 7019
OCD Errors: 0 0
LCD Errors: 0 0
Total Cells: 77263404 478541654
Data Cells: 243478 40864159
Bit Errors: 0 542031

Total ES: 0 276220
Total SES: 0 276035
Total UAS: 19 275966

Kindly see reply in another thread of yours.
Try GDMT.
Please see your BB connection is as per
set up. below. ( courtesy : BSNL)
India Broadband Forum

Thank you very much essebe

are you connected via USB?