Results 1 to 6 of 6

Thread: Lost IP addrs 192.168.1.1 of Siemens 2110

  1. #1
    Junior Member
    Join Date
    Jun 2008
    Liked
    0 times
    Posts
    10

    Post Lost IP addrs 192.168.1.1 of Siemens 2110

    The Siemens 2110 has lost its IP address. It happned when it failed to connect to Net. I reboot to factory. Then tried to change the Username & PWd "multiplay". I am using PPPOE. Since then the browser could not find the IP address of ADSL router. I turned off the modem. Truned it on. The Link and Data LED do not turned on. By the way this the FOURTH time I have faced this sort of Porb. I posted thread earlier about this.Previously the BSNL changed the modem.
    >>I Physically reset for 1/2/3 mintues. No use.
    >>Later I tried to connect with USB. The USB driver couldnot be installed as the Machine could not detect the Router.
    >>Finally I tried to burn the Firmware provided by the BSNL on its site. The Firmware software pinged for about 250 sec. and failed.
    The good sign is that while connecting the modem to LAN card, the LAN LED lits up and at start the FOUR LED lit up for test.
    I believe The problem is with the Firmware.
    Any body has any idea how to reset the router's Factory set IP?

  2. #2
    LEARNER
    Join Date
    Aug 2007
    Liked
    21 times
    Posts
    15,301

    Default

    In your computer
    Network LAN properties
    TCP/IP
    Properties
    Enter 192.168.1.10
    255.255.255.0
    192.168.1.1

    DNS
    208.67.220.220
    208.67.222.222
    Save .

    IN IE type 192.168.1.1 admin admin
    If still modem pages cannot be accessed,

    Try factory reset with power on, via the
    small reset access round hole for 30 seconds.
    (at the bottom of the unit. or) in the rear of the unit.
    Try again.

    If still not working
    Start RUN type cmd type ping 192.168.1.1
    If no result
    exchange faulty unit in BSNL.



    ref :C2110 ADSL MODEM (Type-A) MENU

  3. #3
    Platinum Member
    Join Date
    Feb 2008
    Liked
    0 times
    Posts
    2,766

    Default

    it may just be an ip address issue on the windows pc.. set ip as shown above my essbebe.. dont upgrade firmware, let that be your last option..

  4. #4
    Lost Member sb21pro's Avatar
    Join Date
    Jul 2008
    Liked
    1 times
    Posts
    1,704

    Default

    also try accessing 192.168.1.2

  5. #5
    Junior Member
    Join Date
    Jun 2008
    Liked
    0 times
    Posts
    10

    Default Lost IP

    Tried everything what you suggested.
    The IP of LAN Card : 192.168.1.2
    DNS : 218.248.240.208
    Alter DNS : 218.248.240.135
    Gateway : 192.168.1.1.
    Ping failed.
    Even Sis Sandra could not detect Siemens router.
    Any hardeware reset jumper available? I opened the case. Found nothing.

  6. #6
    Gold Member
    Join Date
    May 2008
    Liked
    0 times
    Posts
    627

    Default

    Try to use your modem to other PC (May be with your friend PC) If the problem is similar then you may contact BSNL for replacement or you may purchage a new modem

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)