Thread: ITI DNA-A211-1 - How to configure PPPoE?

Hey guys,

Could anyone tell me how to configure PPPoE in ITI BSNL ADSL2+ Router?

I have recently changed my modem from HUAWEI to the present ITI. While using HUAWEI i used to connect to the internet using username/password provided by BSNL. But now i dont require any u/p to connect. By switching on the modem i'm getting connected. So is there any mechanism to revert back to the old username/password based authentication.

Now i have to manually switch on the modem at 2AM inorder to download files...

pls help me guys...

neo

Means you are in "Always On " PPPoE mode.
Your UserID ( without @ bsnl .in and password
entered in WAN Page ).

Now you need a Dialer mode using the Wan Mini Port.
You have to enter your USERID amd PW to connect externally.

Access 192.168.1.1 admin admin or ( password)
Advanced Options.
Open WAN Page.
http://i23.tinypic.com/nlpdhs.jpg
Uncheck PPP/PPPoE
Check " Bridged"
Save and reboot.

First of all thank u so much for ur reply..

Originally Posted by essbebe

You have to enter your USERID amd PW to connect externally.

- Could u pls tell me where to enter UserID and Password?

Originally Posted by essbebe

Uncheck PPP/PPPoE
Check " Bridged"
Save and reboot.

- I couldnt see any checkbox in the wan advanced setup page. Please check my screen shot

h**p://img517.imageshack.us/img517/9273/bsnldw8.jpg

Should I need to edit the first entry in the screen shot?
In which page should I check "Bridged" and Click Save and Reboot.
Please clarify.

Your BSNL connection is VPI/VCI 0_35.
( Ignore rest of the entries in this WAN page)
Select/click EDIT

Next page select "Bridged"

Save and Reboot. ( wait for 2 or three minutes)

You said you were using a dialer earlier.
Enter BSNL userID and PW, in the dialer
to connect.

Start/All Programs/Accessories/Communications/ Network
Connection Wizard. follow instructions to make a dialer.


For reference :UT-300R2U ADSL MODEM MENU
( UT300R2U new also modem pages identical )

Thank u sooooo much...! it worked...!
u r a super hero.... hatz off to u man...!


but there is a small problem....
I cant access the site h*tp://192.168.1.1/

i got this message in a login dialog box

"The server 192.168.1.1 at level 15 access requires a username and password."

after giving Username and Password as "admin", it says incorrect login....

is there any way to get access....??

which u/p should be supplied...

pls help me once more....

please try (1) admin & password as password
or (2)user password
or (3) support password.

the problem is fixed by assigning an IP address for the computer.....
i.e changed the option "Obtain an IP address automatically" to "Use the following IP address" and assigned the IP 192.168.1.2.

http://i37.tinypic.com/2n7jhbk.jpg
similar to UTSTAR WA3002-g4 / siemen's s2_Sl141/Beetel 450BXi

Ref: For wireless setup.
Chennai Telephones- Changing password in DataOne Pre-configured modem

Dear Essbebe

I read your answers to other people. u suggest good.
Please help me out.
I hv similar modem and i do not want to connect everytime on the short cut of my desk top. I want my internet will run the moment i plug in the ethernet to my laptop. i do not need to dial everytime the username and password given by BSNL.

my second question is when i plug in my ethernet cable to modem and other end to next computer - the internet does not work on that computer. what shall i do? so i m not getting the benefit of other 3 port of my modem/router

can u help out please.
regards
raghuvansh

Originally Posted by essbebe

Means you are in "Always On " PPPoE mode.
Your UserID ( without @ bsnl .in and password
entered in WAN Page ).

Now you need a Dialer mode using the Wan Mini Port.
You have to enter your USERID amd PW to connect externally.

Access 192.168.1.1 admin admin or ( password)
Advanced Options.
Open WAN Page.
i23.tinypic.com/nlpdhs.jpg[/url]
Uncheck PPP/PPPoE
Check " Bridged"
Save and reboot.

dear neo

i hv same router. but i do not need to dial everytime my user name and password on desk top. i need it should automatically connected everytime when i just plug in the ethernet to my computer/laptop.

pl guide the set up. how did u do at first. i also hv cd of this ITI modem.

secondly my other ethernet port of modem - i cant get the benefit to run on other computer. pl also help that.

thanks & regards
raghuvansh

Originally Posted by neomaverick

Hey guys,

Could anyone tell me how to configure PPPoE in ITI BSNL ADSL2+ Router?

I have recently changed my modem from HUAWEI to the present ITI. While using HUAWEI i used to connect to the internet using username/password provided by BSNL. But now i dont require any u/p to connect. By switching on the modem i'm getting connected. So is there any mechanism to revert back to the old username/password based authentication.

Now i have to manually switch on the modem at 2AM inorder to download files...

pls help me guys...

neo

Originally Posted by essbebe

Your BSNL connection is VPI/VCI 0_35.
( Ignore rest of the entries in this WAN page)
Select/click EDIT

Next page select "Bridged"

Save and Reboot. ( wait for 2 or three minutes)

You said you were using a dialer earlier.
Enter BSNL userID and PW, in the dialer
to connect.

Start/All Programs/Accessories/Communications/ Network
Connection Wizard. follow instructions to make a dialer.


For reference :UT-300R2U ADSL MODEM MENU
( UT300R2U new also modem pages identical )

Hello Essebebe,

I also got my new DNA A211-1 modem for using wifi.
I made all connections as said by you, but the problem is that i can't access my modem settings page i.e. 192.168.1.1!!!!!!

Also i am not able to access wifi network, it's also not working!!!!


Please help me with it as soon as possible.

RESET and try again 192.168.1.1

Please check my signature link wa 3002-g4 quick reference for settings with screen shots.
Chennai Telephones- Changing password in DataOne Pre-configured modem
UTSTAR WA3002-G4 quick reference