Thread: Accessing UT 300R2U

I am wanting to access UT 300 R2U

I did use admin admin as my username and password but i wasnt let in.

Hence i resetted the box and tried the same admin admin thing again without any success.

Any inputs to my numb mind are greatly appreciated.

Thanks

ohh and by resetting the router i meant i held onto the reset buttoned behind the router for about 20 secs in the routers ON condition.

Start RUN type cmd type ipconfig/all

You will get 192.168.1. X
subnet mask 255.255.255.0
Default Gateway: 192.168.1.1 ( usually )
this is the modem's IP address




REF:
UT-300R2U ADSL MODEM MENU

http://www.indiabroadband.net/broadb...etting-up.html (UT300-R2U Ver 2.2 - Guide for setting up)

I have done that already...my problem is when i enter "admin" as my username and password i am not let in the box.It continues asking me for credentials. isnt admin admin the default username and password for the box ?

Thanks again !

Problem Ut300R2U
Reset modem : IP 192.168.1.1 admin admin
No access still.

Sorry.
Please await other users suggestions.
I think you can ping 192.168.1.1 , as the
log-in page is opening.

I hope BSNL will replace the modem. Try.

In some cases, the username/password is admin/utstarcom.

Contact BSNL helpline for info on this.

clear Cache in browser and try again.. refresh 192.168.1.1 .. it should normally work after reset..

Originally Posted by superprash2003

clear Cache in browser and try again.. refresh 192.168.1.1 .. it should normally work after reset..

After reset do i have to setup a connection in the router with BSNL all over again ?
When i resetted i didnt have to setup anything and hence i am doubting that I have not resetted the box at all !!

Thanks for replying

P.S : for resetting i am holding onto the reset button (the small recessed black tiny knob behing the box lol ) pressed with a toothpick for 20 secs.

Now someone pls tell me i am resetting the box wrong and i shall go hang myself or then console my poor little mind by saying i am resetting it right !

P.S 1 : i really do believe i am resetting it.

P.s 2 : i have tried clearing the browser cache...not to avail

Reset method is correct.

did you wait for the power LED to go off and come back on again.. 20 seconds is more than enough actually..