India Broadband Forum

nagendra_gd

Hi there, my MT 882 (the ADSL modem) is working fine. As you indicated, i think i should not have to tamper with its settings. Problem seems to be the settings on the WR only.

I will anyway post the MT 882 settings later once I am home, just to be sure.

I read a lot of the pdf pages yesterday, i will print out parts of it and follow through it accurately. I will probably first hit the reset button to restore factory defaults.

thanks

-Nagendra

Hi, i could be late getting home, logging in and checking out the settings of the WR tonight. I will get to it but will be late. By tomorrow morning, you should see a post of the MT882 settings and other things i will try. Hopefully i will get this to work tonight :-)

thanks
Nagendra

Hi there,

not a lot of progress yesterday night owing to power failure at home.

i am posting MT882 settings below.

Summary
Displays current configurations of MT882
Model Name MT882 Firmware Version V200R001C01B021SP03
Jun 20 2005

ADSL Line Status
ADSL State Show Time
Data Path Interleave

DSP Version D.57.2.17 Operation Mode ADSL2+

Output Power 10.4 dB

Upstream DownStream
ADSL Link Speed 640 Kbps
ADSL Link Speed 6140 Kbps

Previous Tx-Rate 371 Kbps
Previous Rx-Rate 3128 Kbps

SNR 17.9 dB
SNR 23.5 dB

CRC 0
CRC 0

Attenuation 7.0 dB
Attenuation 19.5 dB

FEC 0
FEC 0

HEC(ATM Layer) 0
HEC(ATM Layer) 0


WAN Channel
PVC VPI/VCI IP Address Gateway Subnet Wan Type Status Note
PVC0 0 / 35 59.92.170.195
59.92.160.1
255.0.0.0
PPPoE
PVC1 8 / 35 ---
---
---
Pure Bridged ---
PVC2 0 / 100 ---
---
---
Pure Bridged ---
PVC3 0 / 32 ---
---
---
Pure Bridged ---
PVC4 8 / 81 ---
---
---
Pure Bridged ---
PVC5 8 / 32 ---
---
---
Pure Bridged ---
PVC6 14 / 24 ---
---
---
Pure Bridged ---

LAN Channel
MAC Address IP Address Subnet Mask Speed Duplex Status
00:0F:A3:3E:59:FB 192.168.1.1 255.255.255.0 100BT Full

WAN settings
Wan Type PPP
Connection Type PPPoE
Encap. LLC
Default Route Enabled
PPP
User Name
Password
Use DNS Enabled
Max Idle Time Minutes
Always On

DHCP Server: Disabled

I am yet to do much experimentation based on the manuals (PDF files).

thanks
Nagendra

essbebe

@nagendra_gs
Summary

Enable it in modem
and give a range 192.168.1.3 to say 192.168.1.20

In computer:
Network/LAN properties
TCP/IP
properties
Check" Obtain IP address automatically '

DNS:
can use OPENDNS 208.67.220.220 and 208.67.222.222
Please report progress for WIFI. mode.

cool_techie_tvm

The MT882 seems to be working fine. I would suggest switching the ADSL modulation from ADSL2+ to G.DMT.

Also like mentioned by essbebe please enable DHCP in the MT882.

essbebe

@cool_techie_tvm
A router page is annexed. Please
compare with Dlink/Linksys equivalents.
Checking up.

@Nagendra _gd
You can post jpg pictures here
go down and see "Manage Attachments."

Please Post Device Status page, or
summary page, whether router is working or not.

Attached Images

TP LINK WR642G sample page.jpg (27.6 KB, 18 views)