Results 1 to 9 of 9

Thread: Internet signal LED keeps blinking only on powercut!!!

  1. #1
    Junior Member
    Join Date
    Jun 2008
    Age
    26
    Liked
    0 times
    Posts
    4

    Unhappy Internet signal LED keeps blinking only on powercut!!!

    When electricity goes, on my UPS inverter the internet signal starts blinking soon after power goes off. After this the DSL signal goes down and again starts blinking for two times and gets stablized. Again the same cycle, without dialing (dataone username/password dialup) internet signal blinks. Same cycles goes on until main power is on.

    Can any one help me out to stablize my net during power cut? I have checked with two to three inverters, same problem with all of them. Sometimes i have to work from home and there is at least 8 hours a day powercut at my place.

    Please someone help me soon...

  2. #2
    Amor vincit omnia
    Join Date
    Dec 2007
    Liked
    3 times
    Posts
    3,022

    Default

    ADSL modems are highly sensitive to voltage fluctuations. Try giving the output of the inverter to a stabilizer and then connect the modem to the stabilizer.

  3. #3
    Junior Member
    Join Date
    Jun 2008
    Age
    26
    Liked
    0 times
    Posts
    4

    Default

    Quote Originally Posted by cool_techie_tvm View Post
    ADSL modems are highly sensitive to voltage fluctuations. Try giving the output of the inverter to a stabilizer and then connect the modem to the stabilizer.
    well dude..i have checked with several inverters...right now i have got a pure sine wave inverter which gives me exact 220 V pure output...its a UPS/stabilizer Inverter, which itself works as a stabilizer for 220 V input for my PC (as said by my brother who manufactures inverters ).

    Right now i have disconnected my power plug for inverter, so my pc is running on battery now... there is no disconnection now but when the entire areas electricity goes, internet led next to DSL lead starts blinking n i cant connect...

  4. #4
    MODDY mickey's Avatar
    Join Date
    Jan 2009
    Liked
    12 times
    Posts
    6,931

    Default

    i think you need to stablise

    as adsl modems are highly sensitive to sudden power ups and downs..

    i think you need to stablise

    as adsl modems are highly sensitive to sudden power ups and downs..
    Last edited by mickey; 01-31-09 at 03:33 PM. Reason: Automerged Doublepost

  5. #5
    Platinum Member
    Join Date
    Jan 2009
    Liked
    8 times
    Posts
    2,592

    Default

    Quote Originally Posted by demitry28 View Post
    Right now i have disconnected my power plug for inverter, so my pc is running on battery now... there is no disconnection now but when the entire areas electricity goes, internet led next to DSL lead starts blinking n i cant connect...
    is your exchange/local RSU also connected to the same grid?
    could be a problem at that end also.
    have u verified with other users in your locality if they are also facing similar problems?

  6. #6
    Amor vincit omnia
    Join Date
    Dec 2007
    Liked
    3 times
    Posts
    3,022

    Default

    Quote Originally Posted by demitry28 View Post
    well dude..i have checked with several inverters...right now i have got a pure sine wave inverter which gives me exact 220 V pure output...its a UPS/stabilizer Inverter, which itself works as a stabilizer for 220 V input for my PC (as said by my brother who manufactures inverters ).

    Right now i have disconnected my power plug for inverter, so my pc is running on battery now... there is no disconnection now but when the entire areas electricity goes, internet led next to DSL lead starts blinking n i cant connect...
    U havent mentioned about the steps taken by u to stabilize the voltage. Do not trust the stabilizer inbuilt into the inverter. Use a separate one. Or have u tried it using a voltage stabilizer with the same result?

  7. #7
    Junior Member
    Join Date
    Jan 2009
    Age
    30
    Liked
    0 times
    Posts
    2

    Default

    Hi friends

    I am facing just opposite problem.

    My internet works only when I am on inverter power supply.

    Once I switched on my main supply my DSL gets start blinking & I am not able to connect.

    Even I have tried with stabliser but nothing is helping

  8. #8
    Amor vincit omnia
    Join Date
    Dec 2007
    Liked
    3 times
    Posts
    3,022

    Default

    Quote Originally Posted by naresh332 View Post
    Hi friends

    I am facing just opposite problem.

    My internet works only when I am on inverter power supply.

    Once I switched on my main supply my DSL gets start blinking & I am not able to connect.

    Even I have tried with stabliser but nothing is helping
    Have u tried the modem by connecting another adapter with the same ratings?

  9. #9
    Silver Member
    Join Date
    Dec 2008
    Liked
    0 times
    Posts
    370

    Default

    Seems the problem with the adaptor. My suggestion is to try with a different adopter and check the outcome.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Mobile to pc internet "EZ GUIDE"
    By mickey in forum Mobile phone service providers
    Replies: 3
    Last Post: 02-22-10, 05:49 AM
  2. Internet for noble peace prize 2010??
    By zoooni in forum News from the Tech and IT World
    Replies: 2
    Last Post: 02-10-10, 09:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •