Thread: How to activate wireless on laptop for type 2?

Hi all,
I have taken BSNL broadband connection with type 2 modem. The guy who installed it connected it thru ethernet and said that someone else will come to activate wireless on my laptop. But its 2 days and no ones turned up. I searched net and progressed till 192.168.1.1 and typing admin and admin and the interface opens which says UTSTARCOM on one end and ADSL ROUTER at other end. But what do I do next so that i can surf wirelessly?
Please tell me in detail as I want it badly.On the bottom of modem ( or router) it says Model num: WA3002-g1
I use XP.
Please help me.
Thank you.

Originally Posted by kewl

Hi all,
I have taken BSNL broadband connection with type 2 modem. The guy who installed it connected it thru ethernet and said that someone else will come to activate wireless on my laptop. But its 2 days and no ones turned up. I searched net and progressed till 192.168.1.1 and typing admin and admin and the interface opens which says UTSTARCOM on one end and ADSL ROUTER at other end. But what do I do next so that i can surf wirelessly?
Please tell me in detail as I want it badly.On the bottom of modem ( or router) it says Model num: WA3002-g1
I use XP.
Please help me.
Thank you.

in modem go in wireless enable wireless and connect

Originally Posted by kewl

Hi all,
I have taken BSNL broadband connection with type 2 modem. The guy who installed it connected it thru ethernet and said that someone else will come to activate wireless on my laptop. But its 2 days and no ones turned up. I searched net and progressed till 192.168.1.1 and typing admin and admin and the interface opens which says UTSTARCOM on one end and ADSL ROUTER at other end. But what do I do next so that i can surf wirelessly?
Please tell me in detail as I want it badly.On the bottom of modem ( or router) it says Model num: WA3002-g1
I use XP.
Please help me.
Thank you.

Use WA3002-g1 ADSL MODEM (Type-II) MENU to configure your modem.

I tried this.........

" INTERFACE SETUP -- WIRELESS -- Access point - Activated.
SSID - <You can give any name here, lets u identify ur network>
Broadcast SSID - Yes
Authentication Type - WPA2-PSK (MOST IMPORTANT)
Encryption - AES
Pre-Shared Key - <Give anything, BUT MAKE SURE U REMEMBER WHAT U

TYPED> (This needs to be entered on ur laptop too...)

In the laptop, get to ur wireless networks , and search for

available networks.
U Should find a network having the same name as the SSID, connect

to this network by providing the "Pre-Shared Key(PSK)". That's

it... Ur done. "



Then i got connected that way.....BUT couldnt surf...couldnt ping...

Now to try the configuration link given above.....do i need to undo the changes i have made?
I am confused.
Please help.
ty.

Editing here:
I tried the above mentioned link but same outcome.
I get connected to wireless after entering the key, but I cant surf.
I get this thing in the adress bar after i type url for yahoo

hxxp://avg.urlseek.vmn.net/search.php?lg=en&mkt=en&type=dns&tb=ie&tbn=avg&q=w ww%2Eyahoo%2Ecom

I think you are new to the era of broadband so in my opinion you should have a glance in this section

Broadband How to

Make sure you have browsed all the guides or the ones which are of your interest

@kewl

have you configured your tcp/ip settings yet?

@kewl
See this link. For Always on connection. ( No dialer)
WA3002

If still problem disable AV program and try.

Originally Posted by kewl

Then i got connected that way.....BUT couldnt surf...couldnt ping...

Please disable the router's inbuilt firewall and try the connection again.

@saurav_kataruka

TCP/IP settings were done by the guy who got me connected by ethernet.
Do I need to do them for wireless as well?

Originally Posted by kewl

TCP/IP settings were done by the guy who got me connected by ethernet. Do I need to do them for wireless as well?

No.

Also try changing the authentication type to WPA-PSK !

well if you arent getting an ip address ( possible reasons - DHCP disabled in your router ) then you may have to setup static ip for wireless as well.. dont use the same ip for wireles and wired.. change the last set. i.e. if wired is 192.168.1.10 then set wireless to 192.168.1.11

hi i have taken bsnl dataone connection recently.i am able use to net by connecting my laptop with wire but i want to know how set up wi fi network, i am using DNA-A211-I ADSL 2+ Modem/Router (4Ethernet + 1Wi-Fi) ITI modem and bsnl person has provided me my login id and password only so please any one help me

@kewl
Question :.

TCP/IP settings were done by the guy who got me connected by ethernet.
Do I need to do them for wireless as well?

Suggestions;
1.

@ totally fandu
in modem go in wireless enable wireless and connect

2.

@player
Broadband How to

3.*****

@cool_techie_tvm
WA3002-g1 ADSL MODEM (Type-II) MENU

4

@sauvrav_katura
have you configured your tcp/ip settings yet?

5.***

@essbebe
See this link. For Always on connection. ( No dialer)
WA3002
WA3002
If still problem disable AV program and try

6.

@cool_techie_tvm
disable the router's inbuilt firewall

7.

@cool_techie_tvm
NO.....Also try changing the authentication type to WPA-PSK !

8.

@superprash2003
well if you arent getting an ip address ( possible reasons - DHCP disabled in your router ) then you may have to setup static ip for wireless as well.. dont use the same ip for wireless and wired.. change the last set. i.e. if wired is 192.168.1.10 then set wireless to 192.168.1.11

9.
IF YOU follow (3) above and checking screen shots in (5),
You have connection available
BOTH in LAN mode and WIFI mode.
IP entries remains same.!!!
You are using ONLY ONE laptop.
Disconnect LAN cable when using WIFI!

Did you do this in your computer ?
Start/All programs/Accessories/Communications/
Wireless Network Wizard.

If there are some leds in your laptop Wireless lan
adapter are they blinking ? One power(steady) another wireless.

Then START/Network/WirelessNetwork
Status.
What you see ? Try Repair etc
Or do you see a WIFI icon in TaskBar ?.

FEEEDBACK.