Thread: How to configure my BSL connection with 440BX2 modem and Netgear WGR614 router

This is my first post in this forum.

I have a working BSNL connection setup in Always-On mode using SE440BX2 modem. Now I have purchased a Netgear WGR614 router. I am unable to setup the wireless connection using Netgear CD and Smart Wizard - always getting error message although I follow all steps correctly.

I have tried steps provided in the many help documents - but no luck. Please help.

440BX(1) or 450BX1 itself is a wifi modem/router.
Please confirm your MODEM unit correctly.
http://i67.photobucket.com/albums/h2...s/untitled.jpg
To the best of my knowledge there is no 440BX2 modem

Also SE440bX2 REFERS TO iNTEL MOTHERBOARD.
Goggle search : SE440Bx2 ( first page)

Anyway look at this website for any similarity
for settings in Wireless Mode.
Chennai Telephones- Changing password in DataOne Pre-configured modem

chennai.bsnl.co.in/BBS/WA3002G4.htm#Wireless_security
===================================
INFO:
PHT815EP Series

Intel Pentium III 600Mhz Processor
Intel SE-440BX-2 Motherboard
*512K Cache Supported
*2 ISA Slots
*Integrated 3D Audio
64MB SDRAM
S3 Trio 3D/2X AGP Video with 8MB
30GB (5,400RPM) Ultra DMA Hard Drive
56X CDROM Drive
17”Viewsonic FST Color Monitor
33.6Kbps Lucent Chip Hardware Modem ( * for dialup?)
300W Speakers
==================================
Update: 1148PM
for WGR614;
http://www.indiabroadband.net/bsnl-b...html#post15832 (NetGear WGR614v7 and BSNL BroadBand with UserName and Password)

Please ignore post if found not useful

Originally Posted by Razor1111

This is my first post in this forum.

I have a working BSNL connection setup in Always-On mode using SE440BX2 modem. Now I have purchased a Netgear WGR614 router. I am unable to setup the wireless connection using Netgear CD and Smart Wizard - always getting error message although I follow all steps correctly.

I have tried steps provided in the many help documents - but no luck. Please help.

May i ask something? What is the need for the 440BX2 when u have a WGR614? U can directly connect the WGR614 to the telephone line and configure it to function in pppoe mode (always on mode).

Edit : My mistake. Seems like WGR614 is a wireless gateway.

How are both the devices connected with each other? I mean how 440BX2 and WGR614 are connected? Through cable? Have u checked the type of cable? Cross-over / Straight-through ?