Thread: bsnl connection setup

i just formated my system. i'm using ul750 plus plan.
i been able to connect to the internet using the dataone cd.
but the prob is wen ever i start pc it automatically gets connected to the internet n it doesnt even shows connected icon in system tray. before formating dere were 2 connected icons n also one icon on desktop were i use to double clik >> enter username n pass >> clik connect >> n wen i'm finished i use to disconnect.
now i want to know how to get those things bak
thax

U need to create a new pppoe connection from the new connection setup wizard, which is found under network connections. After creating the new connection, create a shortcut, the shortcut will be placed on the desktop.

Create dial up connection that mean use ppp mode it can give you good stable connection.
if you windows user create go to control panel --network connection and create a icon on desktop.
and also check your SNR value due to frequent disconnection.

Originally Posted by cool_techie_tvm

U need to create a new pppoe connection from the new connection setup wizard, which is found under network connections. After creating the new connection, create a shortcut, the shortcut will be placed on the desktop.

step by step procedure plzz
i'm using windows xp professional sp 2

Originally Posted by rupu1983

Create dial up connection that mean use ppp mode it can give you good stable connection.
if you windows user create go to control panel --network connection and create a icon on desktop.
and also check your SNR value due to frequent disconnection.

ya i'm using xp sp2 professional.
by the way after creating shortcut deres onl;y one option disable.
after disabling it is taking abt 1-2mins to enable.
wat i want is a disconnect option.

Start...Control Panel....Network Connections....New Connection Wizard.

On the third window, select Set up my connection manually and in the next window choose the second option. The wizard is self explanatory..

Originally Posted by cool_techie_tvm

Start...Control Panel....Network Connections....New Connection Wizard.

On the third window, select Set up my connection manually and in the next window choose the second option. The wizard is self explanatory..

done but still i'm connected to the internet after windows starts n it is saying invalid username n password.

That i cannot help u out. Are u sure u are entering the correct username/password combination? Verify whether the CAPS in on. If the error persists contact your telephone exchange. They might help u reset the password.

try entering USERID without @ bsnl. in

remove the bsnl cd .. i think you are already connected using the bsnl provided dialer.. remove that.. and setup the dialer again..
the second part of this tutorial has info on how to setup the dialer Prashanth Speaks-Technology and Life: How to Setup bridged mode in UT300R2U,WA3002G4

Originally Posted by cool_techie_tvm

That i cannot help u out. Are u sure u are entering the correct username/password combination? Verify whether the CAPS in on. If the error persists contact your telephone exchange. They might help u reset the password.

no i mean i'm connected to the internet but not how the way i want to.
wat i'm saying is wenever i start my pc i'm connected to internet.
before formating dere were dailup icon where i use to clik to connect n to disconnect.

Originally Posted by superprash2003

remove the bsnl cd .. i think you are already connected using the bsnl provided dialer.. remove that.. and setup the dialer again..
the second part of this tutorial has info on how to setup the dialer Prashanth Speaks-Technology and Life: How to Setup bridged mode in UT300R2U,WA3002G4

kewl i think it will work
let me try
EDIT- need little help
where to set VPI/VCI values ??
http://www.prash-babu.com/2008/05/ho...-ut300r2u.html

U need to reset your modem to erase the existing settings which are stored in the modem. then try creating a new connection using the new connection wizard. Else it wont work out. U should either configure your modem to work in pppoe mode or else in bridge mode. Only one mode can work at a time.

pppoe mode : net is connected as soon as u switch on the modem
bridged mode : net needs to be dialed out for establishing the connection..

Originally Posted by cool_techie_tvm

U need to reset your modem to erase the existing settings which are stored in the modem. then try creating a new connection using the new connection wizard. Else it wont work out. U should either configure your modem to work in pppoe mode or else in bridge mode. Only one mode can work at a time.

pppoe mode : net is connected as soon as u switch on the modem
bridged mode : net needs to be dialed out for establishing the connection..

so now my question is:crying:
how should i reset to a bridged mode

The little I know about Dataone Broadband Services offered by BSNL
Follow the screen shots in this web site.
1.Confirm You are connected to Internet In "ALWAYS ON "
mode.
2. Changing to Dialer Mode is easy. Instead of PPP/PPPoE you have to select "bridging"

http://img122.imageshack.us/img122/9954/network5kk6.png
Save reboot.
3. Confirm you have created a dialer in Computer.
http://www.calcuttatelephones.com/da...l/pppoe04.html

Originally Posted by essbebe

The little I know about Dataone Broadband Services offered by BSNL
Follow the screen shots in this web site.
1.Confirm You are connected to Internet In "ALWAYS ON "
mode.
2. Changing to Dialer Mode is easy. Instead of PPP/PPPoE you have to select "bridging"

http://img122.imageshack.us/img122/9954/network5kk6.png
Save reboot.
3. Confirm you have created a dialer in Computer.
PPPoE DIALER INSTALLATION

not working:crying: page is just bouncing after entering username n password.
but de r working on Dataone WebMail

but de r working on Dataone WebMail

This means YOU are connected to internet in "Always ON"mode.

Surf tonight and study the links given.

We are not astrologers, , and you should answer each query
separately& properly. and in proper English No SMS here.

"I did that and this was working so i changed that, there, and now it is not wkg

, kind of post will lead us nowhere !

Para two :
In Internet Explorer, Internet options , connections
select "Never dial a connection" and then try.
AFTER changing to ""bridging" in WAN page of modem

Originally Posted by essbebe

This means YOU are connected to internet in "Always ON"mode.

Surf tonight and study the links given.

We are not astrologers, , and you should answer each query
separately& properly. and in proper English No SMS here.
, kind of post will lead us nowhere !

Para two :
In Internet Explorer, Internet options , connections
select "Never dial a connection" and then try.
AFTER changing to ""bridging" in WAN page of modem

username password which i'm entering on http://192.168.1.1 r not working page is bouncing after entering username pass.
but those same username n pass r working on dataone.in site.

I suggest u checkup with the nearest exchange. They will reset your password.

username password which i'm entering on http://192.168.1.1 r not working page is bouncing after entering username pass.
but those same username n pass r working on dataone.in site.

see Post 13 . First link.
For this modem/router WA3002-G4 wireless router:
Open IE:
Enter 192.168.1.1
userID : admin
Password admin
Open each menu item make a screen shot and SAVE.

Then try "Bridging" mode
If still Unable to access the modem settings pages
you have to RESET the modem/Router.
( All settings will revert to Factory default)
You have to re enter all old settings. to get connected.

Para two : EXAMPLES
1. UserID : given by bsnl abcd @ bsnl.in
................ Password abc45rt
( to connect to Internet and access web mail )

2.PortalID: omy12340102009 Password: password
( for checking usage at bbservice.bsnl.in)

3.Modem/router :
Usually ID admin PASSWORD admin or password
( could be changed by user )

Originally Posted by essbebe

see Post 13 . First link.
For this modem/router WA3002-G4 wireless router:
Open IE:
Enter 192.168.1.1
userID : admin
Password admin
Open each menu item make a screen shot and SAVE.

Then try "Bridging" mode
If still Unable to access the modem settings pages
you have to RESET the modem/Router.
( All settings will revert to Factory default)
You have to re enter all old settings. to get connected.

Para two : EXAMPLES
1. UserID : given by bsnl abcd @ bsnl.in
................ Password abc45rt
( to connect to Internet and access web mail )

2.PortalID: omy12340102009 Password: password
( for checking usage at bbservice.bsnl.in)

3.Modem/router :
Usually ID admin PASSWORD admin or password
( could be changed by user )

thax man thax a lot it worked