Thread: Siemens C2110

Hi,

Just recently got my BSNL BB installed.
The modem which they have provided in Siemens C2110.

The issue is that the Link (Yellow) light keeps on blinking and does not get into handshaking mode at all.

Please let me know what is the issue and how to get the same resolved.
What would be the IP settings?

C2110 ADSL MODEM (Type-A) MENU
see diagram for set up also.

http://dataonerouter.blogspot.com/20...iguration.html

OLD thread:http://www.indiabroadband.net/bsnl-b...html#post44564 (Make my line better)

Thanks for the reply.

Can't open the links as Websense installed in Office Server.

see annexure and save it.
I may delete it later.

i. Open the browser and type the url http://192.168.1.1.
ii. Type username admin and password admin in login window.
iii. On left panel, click on Home-> Internet Configuration
iv. Locate the parameter Wan Type and select PPP.
v. On the right hand delete the PPP account
vi. It will take some time , wait . Then Click on new on right side and name it as PPPoE and you will find VCI setting as 38 change it to 35.click next.

vii. Then keep everythin unchanged just click next and select Brigded and ensure below LAN/STMP.

viii. click next keep every thin unchanged now click Admin click reboot . important check whether it is selected from last.

and you are done with modem configuration.

you have to use a dialer.

Hi,

Got the modem fixed, do have a steady link.
But, now the issue is that when I'm trying to connect it either says error 815 of Error 678, it does not reach the password authentication stage.

Please advise.

error 678 is due to failure in bsnl. dont worry it will connect after few moments

ensure that you have entered the correct username/password

I have entered the correct username and password, but still the Error 678 persists.
What should be the TCP/IP settings?

The LAN shows connected in the network connectioons, but when dialling using the PPPOE dialer, the error 678 comes up.

Need help help

Start/Network/Local Area connection/Properties
select tcp/IP
Properties
select obtain IP address automatically or
192.168.1.10
255.255.255.255
192.168.1.1
Dns
Obtain automatically
or
208.67.220.220
208.67.222.222
Apply Save.
Now use dialer.
Feedback

Getting connected now...Thanks

i am using bsnl home ul750 ,yellow ,red and green lights are stable,
but internet dosent connect ,even if it does no pages get opened
not even mail acc.....the thing is sometimes on its own it becomes somewhat normal and give pretty decent resuts..but it rarely happens

help plzzz