Thread: adsl2+modem connected to wireless network but cant browse pages

Hi all,

i am new to this forum and must say the guys here are masters in their networking,

i have bsnl broadband connection i am using adsl2+modem

i have configured modem in wi fi connection, although i can connect to wifi network but still cant browse the web pages,

i can connect both wired and wireless network , i can see wired network is working properly and hence i am able to post this query,

on wireless netowrk i can only see it as connected but no bytes sent or received, plz help me with his,

i am using windows vista os,

regards
king

Mention your modem/wifi router model.
Start/Network/Wireless LAN
repair /status
What is the message ?

For reference comparison:
http://www.chennai.bsnl.co.in/BBS/WA...eless_security

modem: dna-a211-1

on diagnoise i get 3 issues,

automatically get new ip settings

a problem with u r network router or broad band router,

reset the network adaptor wireless network connection

reset the network adaptor wireless network connection

The router link I had given has same settings.

Start/Network/WirelessLAn
properties
TCP/IP
properties
select obtain IP address automatically
Apply Save.

Still problem
Start RUN type cmd type ipconfig /all
post results.

Do you get the Wireless network Icon in Taskbar?
Connected signal strength etc ?

i did same thing as mentioned in the link,

here is the attachement...

here is another file which shows singal strength

Appears your OS is Vista . Confirm
( IF IPV6 appears in TCP/IP page disable it
select obtain IP address automatically )

For XP Pro sp3 ( which I use )
Start/All programs
Accessories/
communications
Wireless network wizard.
Follow instructions.

Ethernet adapter Wireless Network Connection 2:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wireless Notebook Adapter
MN-720 #2
Physical Address. . . . . . . . . : 00-0D-3A-6B-xx-xx
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.2.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.2.1
DHCP Server . . . . . . . . . . . : 192.168.2.1
DNS Servers . . . . . . . . . . . : 208.67.220.220
208.67.222.222
Lease Obtained. . . . . . . . . . : Saturday, March 07, 2009 4:24:57 PM
Lease Expires . . . . . . . . . . : Sunday, March 08, 2009 4:24:57 PM

yes it already disable.. and this is driving me nuts i am missing something here in vista which is not allowing me to browse the pages even though i am connected to wireless netwoek...

@king_19
1.Appears you are using a dialer.
2.Try "Always On" connection
3.Enable DHCP in router.
Give range 192.168.1.3 to 192.168.1.20

i can see wired network is working properly

Presume you are able to surf.
4.Your default gateway IP is different .
10.xx.xx.xx ( did you enter this ?)
Preferred IPV4 address etc.

5.Ping 192.168.1.1 . Do you get response ?

6.IN TCP/IP properties
select obtain IP address automatically.
for BOTH ethernet card and wireless card.

Follow the settings given in Chennai link.