Thread: BSNL BROADBAND on 2 PC

Dera Friends,

Hello,


Please help me I have bsnl broadband. My modem has 1 lan pin & 1 Usb port. I want to use broadband on 2 computers. 1 by lan cable 2nd by usb cable. i put my modem on pppoe mode but i can access internet only 1 computer.


Please ghelp me.


Thanks

I was using the same way and working fine on both PCs.
But when I got IPTV then modem replaced by wifi DNA-A211-I.
After than I am facing problem in using two PCs. Now the problem is that when I use two PCs or one PC and one IPTV then DSL goes after 2-3 Hours.
and it comes and goes this process continue till I off the modem for 20-30 Minutes.
I dont know where is problem

Modem Router DNA-A211-I

@nagendra
1.Have you posted your own web site
h t t p://w w w.indiadawn.com/
using same modem/router ?

2. computer1. having LAN ethernet card.

3 computer.2 not having ethernet card.
using usb port.

4. Please help out @parameshwar with details of your setup. ( without IPTV connection )

5. Can you use/try a WIFI lan card in computer 2 ?

No, Dear I have posted my website on ZTE.
but due to IPTV modem replaced by DNA-A11-I.

PROBLEM

Now the problem is that when I use two PCs or one PC and one IPTV then DSL goes after 2-3 Hours.

@naagendra.
..Now the moderators in this forum have decided ,
....I have a very low "IQ"!
......If you don't answer fully points raised by me ,
....... I cannot continue the discussion.
.........You are "Admin" for a web site like/similar to this forum,
............ and your response does not clarify whether
you are using both Modems ZTE as well as DNA...

No, Dear I have posted my website on ZTE.

So replaced by DNA-A11-I, where you should have repeated settings for posting your web site. confirm.

Para two: SEM India site. for the modem
h t t p://www.semindia.in/SemIndiaSystems_DwnLoad.htm

Originally Posted by essbebe

PROBLEM

..Now the moderators in this forum have decided ,
....I have a very low "IQ"!

I think you have the highst repo points (See here) in this forum, then how someone can call you as low "IQ"!!!!

@limpu_cool.
Thanks. stats disabled.
Please do not "hijack" thread. Just for fun !

Update : 1230PM
Stats appear "disabled" to me.
Tried FF and IE.
checking up computer/ Firewall settings.
Did access when contest was on. till Feb 26th.
@limpu_cool
Thanks for the information.
Update 0525PM Page opens normally in Opera.
Checking filters/addons etc in FF and IE.

:

this is how i connected my bsnl broadband to two PCs

1. I connected the modem to my Laptop thru USB cable provided by BSNL. Then I used the Ethernet cable to connect my laptop and my other Computer (using Local Area Connection 1)
2. Right Click the Dial- Up connection in the Network Connections section and click Properties. In the Advanced tab , tick " Allow other network users to connect through this computer's internet connection "
3. In the Home network Connection , select " Local Area Connection 1 " or the connection thru which you connected the other computer
4. Unchecked the" Establish dial-up connection ******* "
5. Click Settings and Tick all the services mentioned.
6. Use the internet from the second computer thru the first computer .
7. The only drawback is that the first computer should be switched ON and also the internet for the second computer to access.

Dear essbebe

Here is my query details:

Question 1.
I was using Zte Zxdsl 831aii, then my internet connection was working very well. But when I got IPTV then this modem is replaced by DNA-A11-I (means old modem took by the IPTV team, Now I have only this DNA-A11-I).
but after getting this wifi modem I am facing problem. when i use two connections via its Ethernet port then DSL light get blinking after 2-3 hours. and don't get stable. But When I Turn off the modem and turn on it after 20-30 Minutes then it got stable. This process continues in the same manner.

Question 2.
I am unable to open my own website while its opening on other PCs. When I open website its give "cant find the server" Error. This problem i am facing just before two days.

Both question are different. There is no relation between these.
In fact I was accessing website after getting this modem (DNA-A11-I). But Q 2. is the problem I am facing from two days.

I hope matter is clear now

Thanks

Update:
Thanks essbebe to give semindia site
My second problem solved after upgrade the software of modem (DNA-A11-I)

Thanks again

hoping that first one will also solved

Glad to note one problem ( question 2 ) is solved.
Now:
Problem: DNA-AII-I- wifi modem. Instability with IPTV
(earlier Zte Zxdsl Internet without IPTV working well)

Means there is no problem in the computers.
(a)For IPTV the BW requirement is high and ADSL2+
would have been preferred.

(b)The difference is addition of WIFI .
IPTV ( set top box) goes directly to ADSL Modem Port.
(
(c)Please have a look at the link given.
and disable WIFI settings.Internal radio freq for
WIFI ( usually in 2 GHZ range ) could be the cause.

(d)Please post present ADSL data showing SNR/ATTN/Mod .
If still problem after trying (c) above.

(e) wait please. for link.

http://www.chennai.bsnl.co.in/BBS/WA...eless_security

h t t p://www.chennai.bsnl.co.in/BBS/WA3002G4.htm#Wireless_security
confirm settings are similar.

(f) still waiting for 192.168.1.1/look.html data from you.
This will give addl info (FW img file) info compared to Device status.

m using a 8-port Switch instead of USB and i hv 3 pc's connected on one modem.
and its working gr8

I am using WiFI 4 Port + 5 Port Hub.
All are working fine

Originally Posted by undead

this is how i connected my bsnl broadband to two PCs

1. I connected the modem to my Laptop thru USB cable provided by BSNL. Then I used the Ethernet cable to connect my laptop and my other Computer (using Local Area Connection 1)
2. Right Click the Dial- Up connection in the Network Connections section and click Properties. In the Advanced tab , tick " Allow other network users to connect through this computer's internet connection "
3. In the Home network Connection , select " Local Area Connection 1 " or the connection thru which you connected the other computer
4. Unchecked the" Establish dial-up connection ******* "
5. Click Settings and Tick all the services mentioned.
6. Use the internet from the second computer thru the first computer .
7. The only drawback is that the first computer should be switched ON and also the internet for the second computer to access.

Brother please tell me step by step solution for my prob.






you give me this sugge.
this is how i connected my bsnl broadband to two PCs

1. I connected the modem to my Laptop thru USB cable provided by BSNL. Then I used the Ethernet cable to connect my laptop and my other Computer (using Local Area Connection 1)
2. Right Click the Dial- Up connection in the Network Connections section and click Properties. In the Advanced tab , tick " Allow other network users to connect through this computer's internet connection "
3. In the Home network Connection , select " Local Area Connection 1 " or the connection thru which you connected the other computer
4. Unchecked the" Establish dial-up connection ******* "
5. Click Settings and Tick all the services mentioned.
6. Use the internet from the second computer thru the first computer .
7. The only drawback is that the first computer should be switched ON and also the internet for the second computer to access.


BUT STILL I CAN NOT ABLE TO USE BROADBAND ON 2 COMPUTERS

PLEASE MAIL ME STEP BY STEP PROCESS
IF YOU CAN SEND ME JPG PLEASE DO IT



WHAT WILL I DO ON FIRST COMPUTER & ON 2ND COMPUTER



THANKS