Thread: Limited or no connectivity in bridge mode.Guys plz help me

First of all thanks for this kind of excellent forum

Guys ,

First i used UT STARCOM 300R2 with earth problem's in my power supply so 3 days once my internet connect will get disconnected.Then bsnl officer told me to fix it so i fixed it and then only he gave me the connection.

After that all goes fine for 2months now the connection tells the message "Limited or no connectivity........."

But it works in both the connection mode.it takes too long time to connect in bridge mode

1. I do tried PPPoE mode it works fine
when returning to bridge mode it tells the message "Limited or no connectivity........." again

2. now i replace my modem to DNA-A211-I
even thought same problem exist

3. reinstalled network drivers.but no use

my system config:

OS:WinXP SP3
Kaspersky8 2009

help me out guys plz

Advance thanks

I do tried PPPoE mode it works fine
when returning to bridge mode it tells the message "Limited or no connectivity........." again

Presume you have selected correct settings for "Bridged" mode. Apply SAVE reboot etc.

TRY:
Start/ Network/ LAN
properties
tcp/IP
properties
Obtain IP address automatically
DNS ( preferred. no change , if you don't want )
present one or
208.67.220.220
208.67.222.222
apply save.

Para two : Post ipconfig /all data
when in "Bridged Mode "

REFERENCES : similar modem/router.
The little I know about Dataone Broadband Services offered by BSNL screen shots
h t t p://www.chennai.bsnl.co.in/BBS/WA3002G4.htm
New Page 1


http://chennai.bsnl.co.in/BBS/UT300R2.htm with screen shots for reference.

More "GYAN"
h t t p://compnetworking.about.com/od/windowsnetworking/ht/limited-connect.htm

It seems that u hav not dialed the pppoe connection from ur comp, when the modem was in bridge mode. If that doesnt work try using manual settings on ur comp.

TRY:
Start/ Network/ LAN
properties
tcp/IP
properties
Obtain IP address automatically
DNS ( preferred. no change , if you don't want )
present one or
208.67.220.220
208.67.222.222
apply save.

I tried it but still my problem persist

h**p:// www .chennai. bsnl .co .in/BBS/WA3002G4. htm

As by this above link i always use to select the "Bridging" in steps 6.
is it wrong


Before 6 months by google i got this steps as answer for bridging mode to open all port for Utorrent



Now tell me what type i have to follow to open ports for the utorrent download and how i have configure the moderm


kindly check this attachments
IP_config_All.JPG


and one more thing in bridge mode i cannot ping the modem or login to modem
for this reason am resetting the modem each time

In my case, the sub net mask is 255.255.255.0. I used to have a limited or no connectivity for 2-3 days recently. i tried everything ( then subnet mask was shown as 255.255.0.0), then i format C and reinstalled windows. After everything was ok (automatically).

I had a similar ipconfig/all (when i had limited or no connectivity),

ip address was 169...... instead of 192.168.1..2
No value for default gateway ( should be 192.168.1.1)
No DHCP server (should be 192.168.1.1)

Go to network connections, take properties, TCP/IP> properties, choose "use following ip address" instead of " obtain ip address automatically)

and enter those values manually
Please check the attached screen shot.

Use the values in screen shot. If this fails, i suggest format C and reinstall windows (it worked for me)

Go to network connections, take properties, TCP/IP> properties, choose "use following ip address" instead of " obtain ip address automatically)

and enter those values manually
Please check the attached screen shot.

I have done these and my problem is sloved thanks for ur kind responses


Tell me what we had done Did any problem will arise because of these.
I dont know any thing about networking please tell me what are all thinks we done

And i dont want to change the intention of thread to change from here to somewhere so give me links to guide.

Originally Posted by anbutorrent

I have done these and my problem is sloved thanks for ur kind responses

Happy to hear that. By the way, how did you managed to post in this forum when you had limited or no connectivity. I was in total black out. Had to figure it all myself. You can add reputation if you like. It is on the left side, 2nd one, above "post reply".

Originally Posted by anbutorrent

Tell me what we had done Did any problem will arise because of these.
I dont know any thing about networking please tell me what are all thinks we done

As far as I know, this change will not cause any problem. You can use automatic settings once you format C and reinstall windows.

These settings are almost same all over India. Since we know those values, we corrected a bad automatic setting with manual entry.

I have added reps to u man

how did you managed to post in this forum when you had limited or no connectivity.

Even thought the problem exist i can get connected with internet.
I don't know how it had happen to me.

As nobody given the solution has responded, I am responding, no wrong things done I assure you, as you are not familiar with netwoking you cannot understand whatever I say (you have to go to an institute, NOTE: still doubtful). But I assure you nothing wrong done, and will not affect anything.

Thanks a lot it worked me too.....