India Broadband Forum

naresh_ktm

I have Nokia Siemens Networks Sl2_141 adsl modem but the same is not working on routing mode.It does not connects automatically as I start PC whereas it needs to be dial up every time.
Please help me to advise how to set up in routing mode.So it starts automatically as the PC is started.

essbebe

Please see this link for setting up
SL2_141 (Type-B) ADSL MODEM MULTIUSER CONFIGURATION
http://www.calcuttatelephones.com/da...tall/mu10.html
If needed select present router settings to Harddisk ( backup)

"Always On Connection"
follow step by step instructions.
for enter userId ( without @ bsnl.in ) and password.
Apply Save Reboot
wait for two minutes.
Now your internet connection should be on.

naresh_ktm

Hi,it does not work.It still goes on Bridge mode and had to dial up.It does not go on automatically as I start PC.Please advise if there is any other alternative to set up in Routing mode which enables always on as soon as PC is started.

essbebe

Try this link with screen shots.
Confirm modem pages are same.
h t t p://mydataone.net/router/wa3002g4.html
Select PPP and PPPoE instead of "Bridged"

see this screen shot.
http://i23.tinypic.com/nlpdhs.jpg

1.Select VPI/VCI 0_35
edit
select PPP/PPPoE
in WAN page enter BSNL user ID without @ bsnl.in
enter password. etc

naresh_ktm

Hi,It still not workable.Seems some problem with this router.

essbebe

Post these details

Start run type cmd type ipconfig /all

Also screen shot of the connection status page of the modem.

for reference ;
SL2_141 (Type-B) ADSL MODEM MULTIUSER CONFIGURATION

superprash2003

are you connected via USB or LAN?? there seems to be some problem with your modem , it isnt saving settings..
strange , many people are facing this issue

naresh_ktm

Connected thru LAN.

essbebe

Check this.
1.Open Internet Explorer
and on the toolbar,

select > Tools >
Internet Options,

then click on the Connections tab.
Put a DOT in the Never dial a connection setting,

click Apply
and OK out.

ukdgoswami

Dear essbebe,

I have configured the modem as 'always on' successfully. However I have failed to bring out a situation where more than one computer is wanting to access the net simultaneously in a 'NOT always on' situation. To expand this what i mean is that in a pppoe_0_35_1 mode the modem gets configured in 'Always On' situation and here I have no problem as a multiuser. However I donot want this situation as my subscription is not an unlimited one.

I would like to log out whenever I am not using the net, while keeping my modem ON. As of now I have removed pppoe_0_35_1 from the settings of WAN and have configured the modem in bridge mode. When I log on to the net from any one machine, there is no problem in logging in but when I wish to logon simultaneously from another machine, I am not allowed to so. Configuring it in pppoe_0_35_1 is keeping the net always on whenever the modem is swithched on and that is why I removed it. Did I do anything wrong?

So to summarise what I would like is:
1. Modem always swithced on
2. Net is 'NOT ALWAYS ON' and gets ON only when logging through dialer.
(as the subscription is not unlimited type)
3. Simultaneous use by more than one computer through dialers in individual
machines, separately.

Please help.

Thanking in anticipation.

Utpal

essbebe

deleted.