Please help meeeee i started this post lol!!!!!!!!!!
Please help meeeee i started this post lol!!!!!!!!!!
@BattleHammer.
Sorry. there were no follow up by you.
Last what I noticed was, that your SNR D/L is quite low.
Can you try the TCP/IP optimizer application
from speedguide.net. select default values
if some things are not clear ( or recommended values)
.
from the Speed scale select the nearest higher speed.
whats the normal values of SNR?
i tried to explain that my SNR is low and my PPPoE connection(not the modem one) gets connected.They say whats PPPoE and SNR they havnt even heard of it!
i gave the infos u wanted viz distance from exchange,plans,etc etc etc!
Last edited by BattleHammer; 05-05-09 at 04:37 AM. Reason: Automerged Doublepost
Did you try TCP/IP optimizer?
Higher the SNR d/l the better . >10 db
Lower the D/L attnuation < 30 db.
Mod selected ; usually GDMT.
BSNL dataone 8:10 AM 5/5/2009 MT882 essbebe
upstream downstream
SNR 24 dB 34.0 dB
Attenuation 5.5 dB 13.0 dB
There is a thread discussing SNR etc in "Broadband How to ... "forum
Last edited by essbebe; 09-06-11 at 09:20 PM.
@essbebe
my current readings are like this 1st in G.Dmt 2) ADSL 2
what do you suggest me...?
Problem i have is when playing online games the ping is very high ~200
@kirankumargb
Your attenuation is high still. 40 db.
Please check the DSL page and "Mod" mode.
1.uncheck Annex M mode , if
selected. Also ADSL2 +.
2. keep Bit swap enabled.
3. please confirm modem model. Mt 882 ?
4. YOUR line conditions are suspect.
check cables/ports for oxidization/blackening/high resistance contacts etc.
a new set of rj11 short cables may improve conditions.
sample page;
http://i19.tinypic.com/6kqygzt.jpg
here it is "disabled". selected. beetel 220BX etc.
Model DNA 211-I.
Hope you had done software update
recommended from SemIndia web site.
http://www.semindia.in/SemIndiaSystems_DwnLoad.htm
Para two:
In your house from the junction box
the RJ11 Cable ( can contain two pairs also)
or the black covered copper cable ( like TV antenna feeder wire *[preferred for low loss])
Does it end in an old fashioned Black junction box
or an yellow Box with Rj11 port?
If latter try to by pass this unit, which contains
additional components /pcb etc. and attenuates the
data signal.
Your modem router is similar to
Beetel450Bx/WA3002_g4/ sl2_141 etc.
Compare h t t p://mydataone.net/router/wa3002g4.html
please confirm.
Last edited by essbebe; 05-05-09 at 01:16 PM.
ok thanks i have not updated the firmware will do that and all the things you said & will update back...!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
essbebe u miss understood me.
"nothing like: "url" was few months before."
I meant to say that there is marginal improvement but..nothing like {URL}
the correct speed I got after the changes u told me was 256Kbps.
and after saving those setting my ROUTER got hanged.
even factory reset was not working.
could not even access 192.168.1.1 to change them.
I took it to DLINK care center...they reset it internally(dunno how)
& now the SPEED IS WORST.
RESULTS:
File Size Time Speed
2,581 Kb 23.974 s 108 Kbps
108Kbps....wdf that is 13.5 kB/sec on torrents. :scared:
(A)cannot understand this.but..nothing like {URL}
(B)In another thread I have mentioned about one auto scheduler you use.
it is reported to be a Malware.
run your Antivirus program.
omg...forget it.
me switching to airtel in few days.
pings depend on the location mate.....i get ping of 120 when i play cod4 in taiwan server and malaysian server.i get pings of 170 in european server and about 290 in american servers,also distance from telephone exchanges,etc,type of wiring etc are included,thing is recently my BSNl connection have started going nuts,and i am sure its the problem of the telephone line coz i can hear other ppls conversations in my line...
yes i already did that TCP/Ip optimizer in its optimal settings..
and yashom...airtel is no better! lol
@yashom
The speed you got was 290.56KB /sec
h t t p://www.youtele.com/youtele08/html/bitcalc/bit.htm
http://www.indiabroadband.net/attach...1&d=1241549820
![]()
Last edited by essbebe; 09-06-11 at 09:20 PM.
There are currently 1 users browsing this thread. (0 members and 1 guests)