Thread: ADSL2+ Router iB-LR6111A (iball Baton)

Download Speed : 1.94 mb/ps
Upload Speed : 0.62 mb/ps

I am using ADSL2+ Router iB-LR6111A (iball Baton). I have configured it using setup wizard. I am new to this matter. Above is the speed I get. Is it OK?

Can anybody of you explain all the settings of this particular router? I have BSNL Home 500 plan.

Confirm the speed reported from this site.
Speedtest.net - The Global Broadband Speed Test
Mumbai and say Sydney servers.

Post the links as hxxp://speedtest.net/xxxxxxxxx.jpg

This router most likely to be same as UT300R2U new Bsnl model.
See this link and confirm please.
pages may appear in
RED in your modem
http://mydataone.net/router/utstar300r2unew.html

Para two:
If you get a stable connection, no further changes are required.
Para three;:

Hope you will find this link useful.
http://www.indiabroadband.net/bsnl-b...html#post82142 (Confusion)

Originally Posted by vijaykhairnar

Download Speed : 1.94 mb/ps
Upload Speed : 0.62 mb/ps

I am using ADSL2+ Router iB-LR6111A (iball Baton). I have configured it using setup wizard. I am new to this matter. Above is the speed I get. Is it OK?

Can anybody of you explain all the settings of this particular router? I have BSNL Home 500 plan.

1.94 Mbps is almost equal to 2 Mbps which is your maximum speed. It seems ok.

speedtest.net/result/470275927.png

You are only allowed to post URLs to other sites after you have made 15 posts or more.

Because of this rule I am unable to post URL. Although you can view the result by pesting the URL in your browser.

Thank you all for your quick response.

yea.. thats a good speed!!

I'm thinking of going for purchasing the same.

I have purchased this one after suffering with DLINK GLB502T.It is good till now.No problem with disconnection during Voltage fluctuation like DLink GLB502T.You have to connect it with UPS. It is much cheaper then DLINK.IT cost me only Rs.1,350/- At Guwahati,Assam.I will post my experience with dlink in this forum.At least others will not suffer.MY speed with this router on dataone-
speedtest.net/result/511869777.png
speedtest.net/result/511876069.png

My Experience with DLINK GLB502T-
indiabroadband.net/general-offtopic-discussions/2757-d-link-glb-502t-post189879.html#post189879

Copy and paste link to your browser or view my other posts.

This is really good router. I am fully satisfied with it. No disconnection problems or any other problems.

I am using this router for many months.it is fine.
--
I have all troubles with d-link's latest avatar -"GLB-802C" 4 times RMA'ed and still keeps failing :P

Can Anyone suggest me how to properly setup this router with BSNL dataone and portforward.

use it in bridge mode and open the needed ports via firewall .why hassles?

@amlansarma

Can Anyone suggest me how to properly setup this router with BSNL dataone

This modem is similar to Ut300R2u new.
try these links.
Iball baton
http://www.iballbaton.com/Drivers/7/...%20Utility.zip

The little I know about Dataone Broadband Services offered by BSNL
Select Dialer mode or "Always On " mode link.
2.

portforward

]
If on dialer mode above post refers.
All ports are open.

specify application and port details.
Check for Ut300r2u in www. portforward.com


feedback.

Originally Posted by amlansarma

Can Anyone suggest me how to properly setup this router with BSNL dataone and portforward.

I am using in bridge mode. In bridge mode no need of port forwarding. This way I am able to download 4 to 5 GB data using µTorrent during night unlimited time ie. 2.10 am to 7.50am.

Originally Posted by amlansarma

Can Anyone suggest me how to properly setup this router with BSNL dataone and portforward.

Try PortForward.com - Free Help Setting up Your Router or Firewall

I have found way how to port forward.
1.Open the Router configuration page by typing 192.168.1.1 in your browser.
2.Click Advanced setup.
3.Then click NAT.
4.After that click virtual servers. There you will find add button.Click that.
5.Then Select Custom server and write Utorrent(your case it might be some thing else)
6.In Server IP address I have put 192.168.1.2.
7.External Port Start-See your port in the Utorrent
External Port End- Same as above
Internal Port Start- Same as above.
Protocol-TCP/UDP.
8.Then save.
9.Then go to maintenance and click Save and reboot.

Last Night I got download speed of 220-235 Kbps at Upload speed of 20Kbps with forwarding port. By the way Port forwarding is not required in Bridge mde(dial mode).It is required only in PPPoE mode(Alaways on).You can check what amount I downloaded last night -

http://www.mediafire.com/imageview.p...twynvm&thumb=5

I could not do port forwarding. Therefore I am using bridge mode. See the result. That is also useful for me to auto download during free night unlimited using µTorrent.

well atleast you got a solution!!

Originally Posted by vijaykhairnar

I could not do port forwarding. Therefore I am using bridge mode. See the result. That is also useful for me to auto download during free night unlimited using µTorrent.

Can you tell me your Utorrent settings?I am impressed with your downloads and uploads.

version 1.8.3

connection > Add windows firewall exception ( checked )
( rest unchecked )
( Here read the number of port and open it in windows firewall )

Bandwidth > Maximum upload rate (kB/s) = 50
Alternate upload rate (kB/s) = 70
Maximum download rate (kB/s) = 0 (unlimited)
Global maximum number connections = 250
Maximum number peers connected per torrent = 50
Number upload slots per torrent = 5
Use additional upload slots if upload speed < 90% ( checked )
Queuing > Number active torrents = 5
Number of active downloads = 3
( rest unchecked )
Web Ul > Enable Web Ul ( Unchecked)


Try these settings.

Port forwarding For This Router
ADSL2+ Router iB-LR6111A (iball Baton)

If you are using PPPoA/PPPoE mode ( That is always connected mode ). Then this may be useful post for you.

Or else

In Bridge Mode No need of Port Forwarding as all ports are forwarded automatically.

Type in your browser http://192.168.1.1/ to open configuration page.
Type Username & Password ( Default admin in both places )
click OK

Advanced setup > Nat >
Select Virtual Circuit = PVC1

Click Virtual Server

Virtual Server for : Single IP Account
Rule Index : 1
Application : ( Here don't select any thing. )
Protocol : ALL
Start Port Number : ( µTorrent port number ) Find out this number from µTorrent > Options > Speed Guide : Current Port
End Port Number : ( µTorrent port number ) Same as above
Local IP Address : 192.168.1.10 ( This is your current ip address given in LAN tcp/ip setting )
Click Save

Finally go to Maintenance > SysRestart
Click Restart

After That again go to µTorrent > Options > Speed Guide : Curent Port
Click "Test if port is forwarded properly"

If Result is OK then every thing is right.

Enjoy.

Hi,
recently I am reading this forum and found this useful information. It is very interesting that the way you explained these and also speed you get. I am using BSNL Home Unlimited 750 plan, which is 256 kbps. I am only get 25kbps download speed. And I am using iBall iB-LR6111A ADSL2+ Router in Bridge mode. Is there any way to increase my download speed ? please reply

256 Kbps is the maximum speed you can get. No matter what you do.

256 kbps = 32 KBps
You can get maximum 32 KBps download speed.

Hello Sir..
I cannot connect my modem using lan cable.. when iam trying to connect it , it will be automatically disconnected.. plz help me...

Originally Posted by snaj.amal

Hello Sir..
I cannot connect my modem using lan cable.. when iam trying to connect it , it will be automatically disconnected.. plz help me...

1. Please mention, modem - model and make

2. Which mode are you using ? PPPoE or Bridge (dialer) ?

3. How many machines are you using ? Any laptops ?

4. Mention OS in each system.