India Broadband Forum

ash ray

i have a bsnl broadband connection 750 ul home plan 256 kbps!
with WA3002G4 model router

recently i accidentally changed the ip address in dsl settings for port forwarding bitcomet, but now my dsl settings is inaccessible and the speed is crippled severely!!!!


Now i can't enable wireless options for my laptop as well!!!

192.168.1.1 used to be my default ip!

and i dont remember the ip address i entered in the settings!

please would some one help me to restore the default dsl router configuration!?

if i try to connect the router webpage it says that "the web page is temporarily down or it has been moved to new address permanently"

need help badly!?!?!? please respond!!!!

i already posted this in one of the threads and got some replies but it didn't work at all!!!!

Any suggestions anyone!?

meetdilip

Start > run > cmd > ipconfig/all, post the details

Go to speedtest.net and check your IP. Type it in your address bar and try.

ash ray

@run cmd:

ipv4:192.168.1.3
sub mask:255.255.255.0
default gateway:192.168.1.1

at speed test:



but it didn't work!!!!!!

Any ideas!?

kirankumargb

At the back of your router there is a RESET button just press and hold it for few seconds till the light on the routers get off then you can leave it, wait till router reboots and then your router is set to defaults, again the address will become 192.168.1.1, username and password will become "admin"

ash ray

well i don't see any reset button at back of my modem/router!!!!??

my model is: WA3002G4

kirankumargb

The reset pinhole is at the bottom of the router, near the front-right leg. Easy to miss with the grid of ventilation holes that covers the entire bottom.

ash ray

well....it did work alright!!
the router page was accessible, but then i was unable to connect the internet after resetting it!!

i had no idea what exactly went wrong, i checked the diagnostics in the router webpage.
i found that ping default gateway indicating FAIL!!!!

then i had no choice but to contact the helpline 1500, then i was asked to reset all the settings in the ipv4 (TCP\IP) lan config,

And the problem is solved!

Thanks to everyone who replied to this thread

and will still be hanging out here for knowing new things!

kirankumargb

glad to know that your problem is resolved and you will be hanging out here,
next time before doing anything like this please inform that you are newbie to configuration so then you will get the post resetting configuration, so you will not have any problem like this time..

ash ray

yeah sure!

i'm quite a newbie now but soon i will know my way around when i spend my time in here knowing about it from peoples in here!!

and thanks again for the help!! "kirankumargb"

oh i forgot to mention that when i reset the router the ppp username and password at WAN settings of the router page was changed,

so i typed the username and password given to me to make it work!

kirankumargb

ya thats correct, when you reset the router it will become like a new router then you have to again configure everything according to your usage.

essbebe

@ash_ray
The following links can be referred for settings.
( with screen shots)
1.Chennai Telephones- Changing password in DataOne Pre-configured modem

2.mydataone.net/router/wa3002g4.html

3.New Page 1

ash ray

thanks for the link "essbebe", very useful!