Thread: Problem With My Modem

i had ut300r2u modem with me. i currently in bridging mode.
so when ever i start my modem i see low connectivity in my lan connection. but when i connect by dialing it get connected and even i can surf the net,secondly cant access my modem setting because of this low connectivity



so can any one help me in this problem. or can give any suggestion to solve this problem.

thats because u havent setup the modems ip address...
right click on the icon that shows low connectivity.. and then click on the "properties"
and then click on the ip address and click on internet protocol and setup teh ip address as..
192.168.1.2
255.255.255.0
192.168.1.1

use OPEN DNS to get a stable connection.. its my advice...

Please go through

http://www.indiabroadband.net/broadb...nectivity.html (How to repair - Limited or No connectivity)

Originally Posted by machbio

thats because u havent setup the modems ip address...
right click on the icon that shows low connectivity.. and then click on the "properties"
and then click on the ip address and click on internet protocol and setup teh ip address as..
192.168.1.2
255.255.255.0
192.168.1.1

use OPEN DNS to get a stable connection.. its my advice...

initially one month early i had not problem as in tcp/ip connection properties i put choose ip and dns automatically. but this current i had face problem in my motherboard so i had replace the whole board so now i am facing problem that i am not getting ip and dns automatically manully is one option but if possible i want automatic configuration.

if more suggestion. or help to find problem. so that i can contact concern person because currently i don't where the problem is?

also my speed of download is also less and connection can break at any moment.. so help me out of this plz!!!!!

one thing i forget to mention is that if i reset my modem and then restart my pc again face the problem so each time i had to reset the modem and do the setting so is any problem in modem.

The link in the previous post will help you assign IP and DNS manually. It is rich with screen shots. Please read before ignoring an answer.

@meetdilip

No offense .
but according to me ............ from his Quote it seems as if he is more-over looking for an automated system rather than a manual method for the configuration purpose but the link posted offers/teaches the manual method of doing it as you already posted And he also has quoted another problem which he is facing.

Originally Posted by meetdilip

The link in the previous post will help you assign IP and DNS manually. It is rich with screen shots.

Originally Posted by donsidh

so now i am facing problem that i am not getting ip and dns automatically manully is one option but if possible i want automatic configuration.

if more suggestion. or help to find problem. so that i can contact concern person because currently i don't where the problem is?

one thing i forget to mention is that if i reset my modem and then restart my pc again face the problem so each time i had to reset the modem and do the setting so is any problem in modem.

(Neutral Tone) Both are same.

DHCP free us of entering the values manually. Since anything that help the problem solved is good, I suggested the link. It is surely worth a try.

It can be reverted back in a few seconds. Just write a click is required.